From: Alain Volmat <alain.volmat@foss.st.com> To: Andi Shyti <andi.shyti@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Alexandre Torgue <alexandre.torgue@foss.st.com>, Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>, Alain Volmat <alain.volmat@foss.st.com> Cc: Conor Dooley <conor@kernel.org>, Valentin Caron <valentin.caron@foss.st.com>, <linux-i2c@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-stm32@st-md-mailman.stormreply.com>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org> Subject: [PATCH v3 6/9] i2c: stm32f7: add support for stm32mp25 soc Date: Fri, 15 Dec 2023 18:06:10 +0100 [thread overview] Message-ID: <20231215170617.95868-7-alain.volmat@foss.st.com> (raw) In-Reply-To: <20231215170617.95868-1-alain.volmat@foss.st.com> The stm32mp25 has only a single interrupt line used for both events and errors. In order to cope with that, reorganise the error handling code so that it can be called either from the common handler (used in case of SoC having only a single IT line) and the error handler for others. The CR1 register also embeds a new FMP bit, necessary when running at Fast Mode Plus frequency. This bit should be used instead of the SYSCFG bit used on other platforms. Add a new compatible to distinguish between the SoCs and two boolean within the setup structure in order to know if the platform has a single/multiple IT lines and if the FMP bit within CR1 is available or not. Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> --- drivers/i2c/busses/i2c-stm32f7.c | 214 ++++++++++++++++++------------- 1 file changed, 126 insertions(+), 88 deletions(-) diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c index f7abf6d3a7b9..01210452216b 100644 --- a/drivers/i2c/busses/i2c-stm32f7.c +++ b/drivers/i2c/busses/i2c-stm32f7.c @@ -50,6 +50,7 @@ #define STM32F7_I2C_TXDR 0x28 /* STM32F7 I2C control 1 */ +#define STM32_I2C_CR1_FMP BIT(24) #define STM32F7_I2C_CR1_PECEN BIT(23) #define STM32F7_I2C_CR1_ALERTEN BIT(22) #define STM32F7_I2C_CR1_SMBHEN BIT(20) @@ -226,6 +227,8 @@ struct stm32f7_i2c_spec { * @rise_time: Rise time (ns) * @fall_time: Fall time (ns) * @fmp_clr_offset: Fast Mode Plus clear register offset from set register + * @single_it_line: Only a single IT line is used for both events/errors + * @fmp_cr1_bit: Fast Mode Plus control is done via a bit in CR1 */ struct stm32f7_i2c_setup { u32 speed_freq; @@ -233,6 +236,8 @@ struct stm32f7_i2c_setup { u32 rise_time; u32 fall_time; u32 fmp_clr_offset; + bool single_it_line; + bool fmp_cr1_bit; }; /** @@ -418,6 +423,13 @@ static const struct stm32f7_i2c_setup stm32mp13_setup = { .fmp_clr_offset = 0x4, }; +static const struct stm32f7_i2c_setup stm32mp25_setup = { + .rise_time = STM32F7_I2C_RISE_TIME_DEFAULT, + .fall_time = STM32F7_I2C_FALL_TIME_DEFAULT, + .single_it_line = true, + .fmp_cr1_bit = true, +}; + static inline void stm32f7_i2c_set_bits(void __iomem *reg, u32 mask) { writel_relaxed(readl_relaxed(reg) | mask, reg); @@ -1492,17 +1504,81 @@ static irqreturn_t stm32f7_i2c_slave_isr_event(struct stm32f7_i2c_dev *i2c_dev, return IRQ_HANDLED; } +static irqreturn_t stm32f7_i2c_handle_isr_errs(struct stm32f7_i2c_dev *i2c_dev, u32 status) +{ + struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg; + u16 addr = f7_msg->addr; + void __iomem *base = i2c_dev->base; + struct device *dev = i2c_dev->dev; + struct stm32_i2c_dma *dma = i2c_dev->dma; + + /* Bus error */ + if (status & STM32F7_I2C_ISR_BERR) { + dev_err(dev, "Bus error accessing addr 0x%x\n", addr); + writel_relaxed(STM32F7_I2C_ICR_BERRCF, base + STM32F7_I2C_ICR); + stm32f7_i2c_release_bus(&i2c_dev->adap); + f7_msg->result = -EIO; + } + + /* Arbitration loss */ + if (status & STM32F7_I2C_ISR_ARLO) { + dev_dbg(dev, "Arbitration loss accessing addr 0x%x\n", addr); + writel_relaxed(STM32F7_I2C_ICR_ARLOCF, base + STM32F7_I2C_ICR); + f7_msg->result = -EAGAIN; + } + + if (status & STM32F7_I2C_ISR_PECERR) { + dev_err(dev, "PEC error in reception accessing addr 0x%x\n", addr); + writel_relaxed(STM32F7_I2C_ICR_PECCF, base + STM32F7_I2C_ICR); + f7_msg->result = -EINVAL; + } + + if (status & STM32F7_I2C_ISR_ALERT) { + dev_dbg(dev, "SMBus alert received\n"); + writel_relaxed(STM32F7_I2C_ICR_ALERTCF, base + STM32F7_I2C_ICR); + i2c_handle_smbus_alert(i2c_dev->alert->ara); + return IRQ_HANDLED; + } + + if (!i2c_dev->slave_running) { + u32 mask; + /* Disable interrupts */ + if (stm32f7_i2c_is_slave_registered(i2c_dev)) + mask = STM32F7_I2C_XFER_IRQ_MASK; + else + mask = STM32F7_I2C_ALL_IRQ_MASK; + stm32f7_i2c_disable_irq(i2c_dev, mask); + } + + /* Disable dma */ + if (i2c_dev->use_dma) { + stm32f7_i2c_disable_dma_req(i2c_dev); + dmaengine_terminate_async(dma->chan_using); + } + + i2c_dev->master_mode = false; + complete(&i2c_dev->complete); + + return IRQ_HANDLED; +} + +#define STM32F7_ERR_EVENTS (STM32F7_I2C_ISR_BERR | STM32F7_I2C_ISR_ARLO |\ + STM32F7_I2C_ISR_PECERR | STM32F7_I2C_ISR_ALERT) static irqreturn_t stm32f7_i2c_isr_event(int irq, void *data) { struct stm32f7_i2c_dev *i2c_dev = data; u32 status; - /* Check if the interrupt is for a slave device */ - if (!i2c_dev->master_mode) - return IRQ_WAKE_THREAD; - status = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR); + /* + * Check if the interrupt is for a slave device or related + * to errors flags (in case of single it line mode) + */ + if (!i2c_dev->master_mode || + (i2c_dev->setup.single_it_line && (status & STM32F7_ERR_EVENTS))) + return IRQ_WAKE_THREAD; + /* Tx empty */ if (status & STM32F7_I2C_ISR_TXIS) stm32f7_i2c_write_tx_data(i2c_dev); @@ -1534,6 +1610,10 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data) if (!i2c_dev->master_mode) return stm32f7_i2c_slave_isr_event(i2c_dev, status); + /* Handle errors in case of this handler is used for events/errors */ + if (i2c_dev->setup.single_it_line && (status & STM32F7_ERR_EVENTS)) + return stm32f7_i2c_handle_isr_errs(i2c_dev, status); + /* NACK received */ if (status & STM32F7_I2C_ISR_NACKF) { dev_dbg(i2c_dev->dev, "<%s>: Receive NACK (addr %x)\n", @@ -1599,63 +1679,11 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data) static irqreturn_t stm32f7_i2c_isr_error_thread(int irq, void *data) { struct stm32f7_i2c_dev *i2c_dev = data; - struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg; - u16 addr = f7_msg->addr; - void __iomem *base = i2c_dev->base; - struct device *dev = i2c_dev->dev; - struct stm32_i2c_dma *dma = i2c_dev->dma; u32 status; status = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR); - /* Bus error */ - if (status & STM32F7_I2C_ISR_BERR) { - dev_err(dev, "Bus error accessing addr 0x%x\n", addr); - writel_relaxed(STM32F7_I2C_ICR_BERRCF, base + STM32F7_I2C_ICR); - stm32f7_i2c_release_bus(&i2c_dev->adap); - f7_msg->result = -EIO; - } - - /* Arbitration loss */ - if (status & STM32F7_I2C_ISR_ARLO) { - dev_dbg(dev, "Arbitration loss accessing addr 0x%x\n", addr); - writel_relaxed(STM32F7_I2C_ICR_ARLOCF, base + STM32F7_I2C_ICR); - f7_msg->result = -EAGAIN; - } - - if (status & STM32F7_I2C_ISR_PECERR) { - dev_err(dev, "PEC error in reception accessing addr 0x%x\n", addr); - writel_relaxed(STM32F7_I2C_ICR_PECCF, base + STM32F7_I2C_ICR); - f7_msg->result = -EINVAL; - } - - if (status & STM32F7_I2C_ISR_ALERT) { - dev_dbg(dev, "SMBus alert received\n"); - writel_relaxed(STM32F7_I2C_ICR_ALERTCF, base + STM32F7_I2C_ICR); - i2c_handle_smbus_alert(i2c_dev->alert->ara); - return IRQ_HANDLED; - } - - if (!i2c_dev->slave_running) { - u32 mask; - /* Disable interrupts */ - if (stm32f7_i2c_is_slave_registered(i2c_dev)) - mask = STM32F7_I2C_XFER_IRQ_MASK; - else - mask = STM32F7_I2C_ALL_IRQ_MASK; - stm32f7_i2c_disable_irq(i2c_dev, mask); - } - - /* Disable dma */ - if (i2c_dev->use_dma) { - stm32f7_i2c_disable_dma_req(i2c_dev); - dmaengine_terminate_async(dma->chan_using); - } - - i2c_dev->master_mode = false; - complete(&i2c_dev->complete); - - return IRQ_HANDLED; + return stm32f7_i2c_handle_isr_errs(i2c_dev, status); } static int stm32f7_i2c_wait_polling(struct stm32f7_i2c_dev *i2c_dev) @@ -1991,23 +2019,27 @@ static int stm32f7_i2c_unreg_slave(struct i2c_client *slave) static int stm32f7_i2c_write_fm_plus_bits(struct stm32f7_i2c_dev *i2c_dev, bool enable) { - int ret; + int ret = 0; if (i2c_dev->bus_rate <= I2C_MAX_FAST_MODE_FREQ || - IS_ERR_OR_NULL(i2c_dev->regmap)) + (!i2c_dev->setup.fmp_cr1_bit && IS_ERR_OR_NULL(i2c_dev->regmap))) /* Optional */ return 0; - if (i2c_dev->fmp_sreg == i2c_dev->fmp_creg) - ret = regmap_update_bits(i2c_dev->regmap, - i2c_dev->fmp_sreg, - i2c_dev->fmp_mask, - enable ? i2c_dev->fmp_mask : 0); - else - ret = regmap_write(i2c_dev->regmap, - enable ? i2c_dev->fmp_sreg : - i2c_dev->fmp_creg, - i2c_dev->fmp_mask); + if (i2c_dev->setup.fmp_cr1_bit) { + if (enable) + stm32f7_i2c_set_bits(i2c_dev->base + STM32F7_I2C_CR1, STM32_I2C_CR1_FMP); + else + stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1, STM32_I2C_CR1_FMP); + } else { + if (i2c_dev->fmp_sreg == i2c_dev->fmp_creg) + ret = regmap_update_bits(i2c_dev->regmap, i2c_dev->fmp_sreg, + i2c_dev->fmp_mask, enable ? i2c_dev->fmp_mask : 0); + else + ret = regmap_write(i2c_dev->regmap, + enable ? i2c_dev->fmp_sreg : i2c_dev->fmp_creg, + i2c_dev->fmp_mask); + } return ret; } @@ -2141,6 +2173,13 @@ static int stm32f7_i2c_probe(struct platform_device *pdev) if (!i2c_dev) return -ENOMEM; + setup = of_device_get_match_data(&pdev->dev); + if (!setup) { + dev_err(&pdev->dev, "Can't get device data\n"); + return -ENODEV; + } + i2c_dev->setup = *setup; + i2c_dev->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res); if (IS_ERR(i2c_dev->base)) return PTR_ERR(i2c_dev->base); @@ -2150,10 +2189,6 @@ static int stm32f7_i2c_probe(struct platform_device *pdev) if (irq_event < 0) return irq_event; - irq_error = platform_get_irq(pdev, 1); - if (irq_error < 0) - return irq_error; - i2c_dev->wakeup_src = of_property_read_bool(pdev->dev.of_node, "wakeup-source"); @@ -2181,20 +2216,19 @@ static int stm32f7_i2c_probe(struct platform_device *pdev) if (ret) return dev_err_probe(&pdev->dev, ret, "Failed to request irq event\n"); - ret = devm_request_threaded_irq(&pdev->dev, irq_error, - NULL, - stm32f7_i2c_isr_error_thread, - IRQF_ONESHOT, - pdev->name, i2c_dev); - if (ret) - return dev_err_probe(&pdev->dev, ret, "Failed to request irq error\n"); + if (!i2c_dev->setup.single_it_line) { + irq_error = platform_get_irq(pdev, 1); + if (irq_error < 0) + return irq_error; - setup = of_device_get_match_data(&pdev->dev); - if (!setup) { - dev_err(&pdev->dev, "Can't get device data\n"); - return -ENODEV; + ret = devm_request_threaded_irq(&pdev->dev, irq_error, + NULL, + stm32f7_i2c_isr_error_thread, + IRQF_ONESHOT, + pdev->name, i2c_dev); + if (ret) + return dev_err_probe(&pdev->dev, ret, "Failed to request irq error\n"); } - i2c_dev->setup = *setup; ret = stm32f7_i2c_setup_timing(i2c_dev, &i2c_dev->setup); if (ret) @@ -2202,9 +2236,12 @@ static int stm32f7_i2c_probe(struct platform_device *pdev) /* Setup Fast mode plus if necessary */ if (i2c_dev->bus_rate > I2C_MAX_FAST_MODE_FREQ) { - ret = stm32f7_i2c_setup_fm_plus_bits(pdev, i2c_dev); - if (ret) - return ret; + if (!i2c_dev->setup.fmp_cr1_bit) { + ret = stm32f7_i2c_setup_fm_plus_bits(pdev, i2c_dev); + if (ret) + return ret; + } + ret = stm32f7_i2c_write_fm_plus_bits(i2c_dev, true); if (ret) return ret; @@ -2483,6 +2520,7 @@ static const struct of_device_id stm32f7_i2c_match[] = { { .compatible = "st,stm32f7-i2c", .data = &stm32f7_setup}, { .compatible = "st,stm32mp15-i2c", .data = &stm32mp15_setup}, { .compatible = "st,stm32mp13-i2c", .data = &stm32mp13_setup}, + { .compatible = "st,stm32mp25-i2c", .data = &stm32mp25_setup}, {}, }; MODULE_DEVICE_TABLE(of, stm32f7_i2c_match); -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Alain Volmat <alain.volmat@foss.st.com> To: Andi Shyti <andi.shyti@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Alexandre Torgue <alexandre.torgue@foss.st.com>, Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>, Alain Volmat <alain.volmat@foss.st.com> Cc: Conor Dooley <conor@kernel.org>, Valentin Caron <valentin.caron@foss.st.com>, <linux-i2c@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-stm32@st-md-mailman.stormreply.com>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org> Subject: [PATCH v3 6/9] i2c: stm32f7: add support for stm32mp25 soc Date: Fri, 15 Dec 2023 18:06:10 +0100 [thread overview] Message-ID: <20231215170617.95868-7-alain.volmat@foss.st.com> (raw) In-Reply-To: <20231215170617.95868-1-alain.volmat@foss.st.com> The stm32mp25 has only a single interrupt line used for both events and errors. In order to cope with that, reorganise the error handling code so that it can be called either from the common handler (used in case of SoC having only a single IT line) and the error handler for others. The CR1 register also embeds a new FMP bit, necessary when running at Fast Mode Plus frequency. This bit should be used instead of the SYSCFG bit used on other platforms. Add a new compatible to distinguish between the SoCs and two boolean within the setup structure in order to know if the platform has a single/multiple IT lines and if the FMP bit within CR1 is available or not. Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> --- drivers/i2c/busses/i2c-stm32f7.c | 214 ++++++++++++++++++------------- 1 file changed, 126 insertions(+), 88 deletions(-) diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c index f7abf6d3a7b9..01210452216b 100644 --- a/drivers/i2c/busses/i2c-stm32f7.c +++ b/drivers/i2c/busses/i2c-stm32f7.c @@ -50,6 +50,7 @@ #define STM32F7_I2C_TXDR 0x28 /* STM32F7 I2C control 1 */ +#define STM32_I2C_CR1_FMP BIT(24) #define STM32F7_I2C_CR1_PECEN BIT(23) #define STM32F7_I2C_CR1_ALERTEN BIT(22) #define STM32F7_I2C_CR1_SMBHEN BIT(20) @@ -226,6 +227,8 @@ struct stm32f7_i2c_spec { * @rise_time: Rise time (ns) * @fall_time: Fall time (ns) * @fmp_clr_offset: Fast Mode Plus clear register offset from set register + * @single_it_line: Only a single IT line is used for both events/errors + * @fmp_cr1_bit: Fast Mode Plus control is done via a bit in CR1 */ struct stm32f7_i2c_setup { u32 speed_freq; @@ -233,6 +236,8 @@ struct stm32f7_i2c_setup { u32 rise_time; u32 fall_time; u32 fmp_clr_offset; + bool single_it_line; + bool fmp_cr1_bit; }; /** @@ -418,6 +423,13 @@ static const struct stm32f7_i2c_setup stm32mp13_setup = { .fmp_clr_offset = 0x4, }; +static const struct stm32f7_i2c_setup stm32mp25_setup = { + .rise_time = STM32F7_I2C_RISE_TIME_DEFAULT, + .fall_time = STM32F7_I2C_FALL_TIME_DEFAULT, + .single_it_line = true, + .fmp_cr1_bit = true, +}; + static inline void stm32f7_i2c_set_bits(void __iomem *reg, u32 mask) { writel_relaxed(readl_relaxed(reg) | mask, reg); @@ -1492,17 +1504,81 @@ static irqreturn_t stm32f7_i2c_slave_isr_event(struct stm32f7_i2c_dev *i2c_dev, return IRQ_HANDLED; } +static irqreturn_t stm32f7_i2c_handle_isr_errs(struct stm32f7_i2c_dev *i2c_dev, u32 status) +{ + struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg; + u16 addr = f7_msg->addr; + void __iomem *base = i2c_dev->base; + struct device *dev = i2c_dev->dev; + struct stm32_i2c_dma *dma = i2c_dev->dma; + + /* Bus error */ + if (status & STM32F7_I2C_ISR_BERR) { + dev_err(dev, "Bus error accessing addr 0x%x\n", addr); + writel_relaxed(STM32F7_I2C_ICR_BERRCF, base + STM32F7_I2C_ICR); + stm32f7_i2c_release_bus(&i2c_dev->adap); + f7_msg->result = -EIO; + } + + /* Arbitration loss */ + if (status & STM32F7_I2C_ISR_ARLO) { + dev_dbg(dev, "Arbitration loss accessing addr 0x%x\n", addr); + writel_relaxed(STM32F7_I2C_ICR_ARLOCF, base + STM32F7_I2C_ICR); + f7_msg->result = -EAGAIN; + } + + if (status & STM32F7_I2C_ISR_PECERR) { + dev_err(dev, "PEC error in reception accessing addr 0x%x\n", addr); + writel_relaxed(STM32F7_I2C_ICR_PECCF, base + STM32F7_I2C_ICR); + f7_msg->result = -EINVAL; + } + + if (status & STM32F7_I2C_ISR_ALERT) { + dev_dbg(dev, "SMBus alert received\n"); + writel_relaxed(STM32F7_I2C_ICR_ALERTCF, base + STM32F7_I2C_ICR); + i2c_handle_smbus_alert(i2c_dev->alert->ara); + return IRQ_HANDLED; + } + + if (!i2c_dev->slave_running) { + u32 mask; + /* Disable interrupts */ + if (stm32f7_i2c_is_slave_registered(i2c_dev)) + mask = STM32F7_I2C_XFER_IRQ_MASK; + else + mask = STM32F7_I2C_ALL_IRQ_MASK; + stm32f7_i2c_disable_irq(i2c_dev, mask); + } + + /* Disable dma */ + if (i2c_dev->use_dma) { + stm32f7_i2c_disable_dma_req(i2c_dev); + dmaengine_terminate_async(dma->chan_using); + } + + i2c_dev->master_mode = false; + complete(&i2c_dev->complete); + + return IRQ_HANDLED; +} + +#define STM32F7_ERR_EVENTS (STM32F7_I2C_ISR_BERR | STM32F7_I2C_ISR_ARLO |\ + STM32F7_I2C_ISR_PECERR | STM32F7_I2C_ISR_ALERT) static irqreturn_t stm32f7_i2c_isr_event(int irq, void *data) { struct stm32f7_i2c_dev *i2c_dev = data; u32 status; - /* Check if the interrupt is for a slave device */ - if (!i2c_dev->master_mode) - return IRQ_WAKE_THREAD; - status = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR); + /* + * Check if the interrupt is for a slave device or related + * to errors flags (in case of single it line mode) + */ + if (!i2c_dev->master_mode || + (i2c_dev->setup.single_it_line && (status & STM32F7_ERR_EVENTS))) + return IRQ_WAKE_THREAD; + /* Tx empty */ if (status & STM32F7_I2C_ISR_TXIS) stm32f7_i2c_write_tx_data(i2c_dev); @@ -1534,6 +1610,10 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data) if (!i2c_dev->master_mode) return stm32f7_i2c_slave_isr_event(i2c_dev, status); + /* Handle errors in case of this handler is used for events/errors */ + if (i2c_dev->setup.single_it_line && (status & STM32F7_ERR_EVENTS)) + return stm32f7_i2c_handle_isr_errs(i2c_dev, status); + /* NACK received */ if (status & STM32F7_I2C_ISR_NACKF) { dev_dbg(i2c_dev->dev, "<%s>: Receive NACK (addr %x)\n", @@ -1599,63 +1679,11 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data) static irqreturn_t stm32f7_i2c_isr_error_thread(int irq, void *data) { struct stm32f7_i2c_dev *i2c_dev = data; - struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg; - u16 addr = f7_msg->addr; - void __iomem *base = i2c_dev->base; - struct device *dev = i2c_dev->dev; - struct stm32_i2c_dma *dma = i2c_dev->dma; u32 status; status = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR); - /* Bus error */ - if (status & STM32F7_I2C_ISR_BERR) { - dev_err(dev, "Bus error accessing addr 0x%x\n", addr); - writel_relaxed(STM32F7_I2C_ICR_BERRCF, base + STM32F7_I2C_ICR); - stm32f7_i2c_release_bus(&i2c_dev->adap); - f7_msg->result = -EIO; - } - - /* Arbitration loss */ - if (status & STM32F7_I2C_ISR_ARLO) { - dev_dbg(dev, "Arbitration loss accessing addr 0x%x\n", addr); - writel_relaxed(STM32F7_I2C_ICR_ARLOCF, base + STM32F7_I2C_ICR); - f7_msg->result = -EAGAIN; - } - - if (status & STM32F7_I2C_ISR_PECERR) { - dev_err(dev, "PEC error in reception accessing addr 0x%x\n", addr); - writel_relaxed(STM32F7_I2C_ICR_PECCF, base + STM32F7_I2C_ICR); - f7_msg->result = -EINVAL; - } - - if (status & STM32F7_I2C_ISR_ALERT) { - dev_dbg(dev, "SMBus alert received\n"); - writel_relaxed(STM32F7_I2C_ICR_ALERTCF, base + STM32F7_I2C_ICR); - i2c_handle_smbus_alert(i2c_dev->alert->ara); - return IRQ_HANDLED; - } - - if (!i2c_dev->slave_running) { - u32 mask; - /* Disable interrupts */ - if (stm32f7_i2c_is_slave_registered(i2c_dev)) - mask = STM32F7_I2C_XFER_IRQ_MASK; - else - mask = STM32F7_I2C_ALL_IRQ_MASK; - stm32f7_i2c_disable_irq(i2c_dev, mask); - } - - /* Disable dma */ - if (i2c_dev->use_dma) { - stm32f7_i2c_disable_dma_req(i2c_dev); - dmaengine_terminate_async(dma->chan_using); - } - - i2c_dev->master_mode = false; - complete(&i2c_dev->complete); - - return IRQ_HANDLED; + return stm32f7_i2c_handle_isr_errs(i2c_dev, status); } static int stm32f7_i2c_wait_polling(struct stm32f7_i2c_dev *i2c_dev) @@ -1991,23 +2019,27 @@ static int stm32f7_i2c_unreg_slave(struct i2c_client *slave) static int stm32f7_i2c_write_fm_plus_bits(struct stm32f7_i2c_dev *i2c_dev, bool enable) { - int ret; + int ret = 0; if (i2c_dev->bus_rate <= I2C_MAX_FAST_MODE_FREQ || - IS_ERR_OR_NULL(i2c_dev->regmap)) + (!i2c_dev->setup.fmp_cr1_bit && IS_ERR_OR_NULL(i2c_dev->regmap))) /* Optional */ return 0; - if (i2c_dev->fmp_sreg == i2c_dev->fmp_creg) - ret = regmap_update_bits(i2c_dev->regmap, - i2c_dev->fmp_sreg, - i2c_dev->fmp_mask, - enable ? i2c_dev->fmp_mask : 0); - else - ret = regmap_write(i2c_dev->regmap, - enable ? i2c_dev->fmp_sreg : - i2c_dev->fmp_creg, - i2c_dev->fmp_mask); + if (i2c_dev->setup.fmp_cr1_bit) { + if (enable) + stm32f7_i2c_set_bits(i2c_dev->base + STM32F7_I2C_CR1, STM32_I2C_CR1_FMP); + else + stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1, STM32_I2C_CR1_FMP); + } else { + if (i2c_dev->fmp_sreg == i2c_dev->fmp_creg) + ret = regmap_update_bits(i2c_dev->regmap, i2c_dev->fmp_sreg, + i2c_dev->fmp_mask, enable ? i2c_dev->fmp_mask : 0); + else + ret = regmap_write(i2c_dev->regmap, + enable ? i2c_dev->fmp_sreg : i2c_dev->fmp_creg, + i2c_dev->fmp_mask); + } return ret; } @@ -2141,6 +2173,13 @@ static int stm32f7_i2c_probe(struct platform_device *pdev) if (!i2c_dev) return -ENOMEM; + setup = of_device_get_match_data(&pdev->dev); + if (!setup) { + dev_err(&pdev->dev, "Can't get device data\n"); + return -ENODEV; + } + i2c_dev->setup = *setup; + i2c_dev->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res); if (IS_ERR(i2c_dev->base)) return PTR_ERR(i2c_dev->base); @@ -2150,10 +2189,6 @@ static int stm32f7_i2c_probe(struct platform_device *pdev) if (irq_event < 0) return irq_event; - irq_error = platform_get_irq(pdev, 1); - if (irq_error < 0) - return irq_error; - i2c_dev->wakeup_src = of_property_read_bool(pdev->dev.of_node, "wakeup-source"); @@ -2181,20 +2216,19 @@ static int stm32f7_i2c_probe(struct platform_device *pdev) if (ret) return dev_err_probe(&pdev->dev, ret, "Failed to request irq event\n"); - ret = devm_request_threaded_irq(&pdev->dev, irq_error, - NULL, - stm32f7_i2c_isr_error_thread, - IRQF_ONESHOT, - pdev->name, i2c_dev); - if (ret) - return dev_err_probe(&pdev->dev, ret, "Failed to request irq error\n"); + if (!i2c_dev->setup.single_it_line) { + irq_error = platform_get_irq(pdev, 1); + if (irq_error < 0) + return irq_error; - setup = of_device_get_match_data(&pdev->dev); - if (!setup) { - dev_err(&pdev->dev, "Can't get device data\n"); - return -ENODEV; + ret = devm_request_threaded_irq(&pdev->dev, irq_error, + NULL, + stm32f7_i2c_isr_error_thread, + IRQF_ONESHOT, + pdev->name, i2c_dev); + if (ret) + return dev_err_probe(&pdev->dev, ret, "Failed to request irq error\n"); } - i2c_dev->setup = *setup; ret = stm32f7_i2c_setup_timing(i2c_dev, &i2c_dev->setup); if (ret) @@ -2202,9 +2236,12 @@ static int stm32f7_i2c_probe(struct platform_device *pdev) /* Setup Fast mode plus if necessary */ if (i2c_dev->bus_rate > I2C_MAX_FAST_MODE_FREQ) { - ret = stm32f7_i2c_setup_fm_plus_bits(pdev, i2c_dev); - if (ret) - return ret; + if (!i2c_dev->setup.fmp_cr1_bit) { + ret = stm32f7_i2c_setup_fm_plus_bits(pdev, i2c_dev); + if (ret) + return ret; + } + ret = stm32f7_i2c_write_fm_plus_bits(i2c_dev, true); if (ret) return ret; @@ -2483,6 +2520,7 @@ static const struct of_device_id stm32f7_i2c_match[] = { { .compatible = "st,stm32f7-i2c", .data = &stm32f7_setup}, { .compatible = "st,stm32mp15-i2c", .data = &stm32mp15_setup}, { .compatible = "st,stm32mp13-i2c", .data = &stm32mp13_setup}, + { .compatible = "st,stm32mp25-i2c", .data = &stm32mp25_setup}, {}, }; MODULE_DEVICE_TABLE(of, stm32f7_i2c_match); -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-12-15 17:11 UTC|newest] Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-12-15 17:06 [PATCH v3 0/9] i2c: stm32f7: enhancements and support for stm32mp25 Alain Volmat 2023-12-15 17:06 ` Alain Volmat 2023-12-15 17:06 ` [PATCH v3 1/9] i2c: stm32f7: use dev_err_probe upon calls of devm_request_irq Alain Volmat 2023-12-15 17:06 ` Alain Volmat 2023-12-22 10:44 ` Wolfram Sang 2023-12-22 10:44 ` Wolfram Sang 2023-12-15 17:06 ` [PATCH v3 2/9] i2c: stm32f7: perform most of irq job in threaded handler Alain Volmat 2023-12-15 17:06 ` Alain Volmat 2023-12-22 10:44 ` Wolfram Sang 2023-12-22 10:44 ` Wolfram Sang 2023-12-15 17:06 ` [PATCH v3 3/9] i2c: stm32f7: simplify status messages in case of errors Alain Volmat 2023-12-15 17:06 ` Alain Volmat 2023-12-22 10:45 ` Wolfram Sang 2023-12-22 10:45 ` Wolfram Sang 2023-12-15 17:06 ` [PATCH v3 4/9] dt-bindings: i2c: document st,stm32mp25-i2c compatible Alain Volmat 2023-12-15 17:06 ` Alain Volmat 2023-12-22 10:45 ` Wolfram Sang 2023-12-22 10:45 ` Wolfram Sang 2023-12-15 17:06 ` [PATCH v3 5/9] i2c: stm32f7: perform I2C_ISR read once at beginning of event isr Alain Volmat 2023-12-15 17:06 ` Alain Volmat 2023-12-22 10:45 ` Wolfram Sang 2023-12-22 10:45 ` Wolfram Sang 2023-12-15 17:06 ` Alain Volmat [this message] 2023-12-15 17:06 ` [PATCH v3 6/9] i2c: stm32f7: add support for stm32mp25 soc Alain Volmat 2023-12-22 10:45 ` Wolfram Sang 2023-12-22 10:45 ` Wolfram Sang 2023-12-15 17:06 ` [PATCH v3 7/9] arm64: dts: st: add all 8 i2c nodes on stm32mp251 Alain Volmat 2023-12-15 17:06 ` Alain Volmat 2023-12-15 17:06 ` [PATCH v3 8/9] arm64: dts: st: add i2c2/i2c8 pins for stm32mp25 Alain Volmat 2023-12-15 17:06 ` Alain Volmat 2023-12-15 17:06 ` [PATCH v3 9/9] arm64: dts: st: add i2c2 / i2c8 properties on stm32mp257f-ev1 Alain Volmat 2023-12-15 17:06 ` Alain Volmat 2024-04-25 8:00 ` [PATCH v3 0/9] i2c: stm32f7: enhancements and support for stm32mp25 Alexandre TORGUE 2024-04-25 8:00 ` Alexandre TORGUE
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20231215170617.95868-7-alain.volmat@foss.st.com \ --to=alain.volmat@foss.st.com \ --cc=alexandre.torgue@foss.st.com \ --cc=andi.shyti@kernel.org \ --cc=conor+dt@kernel.org \ --cc=conor@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-i2c@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=mcoquelin.stm32@gmail.com \ --cc=pierre-yves.mordret@foss.st.com \ --cc=robh+dt@kernel.org \ --cc=valentin.caron@foss.st.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.