From: Maxime Chevallier <maxime.chevallier@bootlin.com> To: davem@davemloft.net Cc: "Maxime Chevallier" <maxime.chevallier@bootlin.com>, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, thomas.petazzoni@bootlin.com, "Andrew Lunn" <andrew@lunn.ch>, "Jakub Kicinski" <kuba@kernel.org>, "Eric Dumazet" <edumazet@google.com>, "Paolo Abeni" <pabeni@redhat.com>, "Russell King" <linux@armlinux.org.uk>, linux-arm-kernel@lists.infradead.org, "Christophe Leroy" <christophe.leroy@csgroup.eu>, "Herve Codina" <herve.codina@bootlin.com>, "Florian Fainelli" <f.fainelli@gmail.com>, "Heiner Kallweit" <hkallweit1@gmail.com>, "Vladimir Oltean" <vladimir.oltean@nxp.com>, "Köry Maincent" <kory.maincent@bootlin.com>, "Jesse Brandeburg" <jesse.brandeburg@intel.com>, "Jonathan Corbet" <corbet@lwn.net>, "Marek Behún" <kabel@kernel.org>, "Piergiorgio Beruto" <piergiorgio.beruto@gmail.com>, "Oleksij Rempel" <o.rempel@pengutronix.de>, "Nicolò Veronese" <nicveronese@gmail.com> Subject: [PATCH net-next v4 09/13] net: ethtool: plca: Target the command to the requested PHY Date: Fri, 15 Dec 2023 18:12:31 +0100 [thread overview] Message-ID: <20231215171237.1152563-10-maxime.chevallier@bootlin.com> (raw) In-Reply-To: <20231215171237.1152563-1-maxime.chevallier@bootlin.com> PLCA is a PHY-specific command. Instead of targeting the command towards dev->phydev, use the request to pick the targeted PHY. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> --- V4: No changes V3: No changes V2: New patch net/ethtool/plca.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/net/ethtool/plca.c b/net/ethtool/plca.c index b1e2e3b5027f..2b3e419f4dc2 100644 --- a/net/ethtool/plca.c +++ b/net/ethtool/plca.c @@ -61,7 +61,7 @@ static int plca_get_cfg_prepare_data(const struct ethnl_req_info *req_base, int ret; // check that the PHY device is available and connected - if (!dev->phydev) { + if (!req_base->phydev) { ret = -EOPNOTSUPP; goto out; } @@ -80,7 +80,7 @@ static int plca_get_cfg_prepare_data(const struct ethnl_req_info *req_base, memset(&data->plca_cfg, 0xff, sizeof_field(struct plca_reply_data, plca_cfg)); - ret = ops->get_plca_cfg(dev->phydev, &data->plca_cfg); + ret = ops->get_plca_cfg(req_base->phydev, &data->plca_cfg); ethnl_ops_complete(dev); out: @@ -141,7 +141,6 @@ const struct nla_policy ethnl_plca_set_cfg_policy[] = { static int ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info) { - struct net_device *dev = req_info->dev; const struct ethtool_phy_ops *ops; struct nlattr **tb = info->attrs; struct phy_plca_cfg plca_cfg; @@ -149,7 +148,7 @@ ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info) int ret; // check that the PHY device is available and connected - if (!dev->phydev) + if (!req_info->phydev) return -EOPNOTSUPP; ops = ethtool_phy_ops; @@ -168,7 +167,7 @@ ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info) if (!mod) return 0; - ret = ops->set_plca_cfg(dev->phydev, &plca_cfg, info->extack); + ret = ops->set_plca_cfg(req_info->phydev, &plca_cfg, info->extack); return ret < 0 ? ret : 1; } @@ -204,7 +203,7 @@ static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base, int ret; // check that the PHY device is available and connected - if (!dev->phydev) { + if (!req_base->phydev) { ret = -EOPNOTSUPP; goto out; } @@ -223,7 +222,7 @@ static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base, memset(&data->plca_st, 0xff, sizeof_field(struct plca_reply_data, plca_st)); - ret = ops->get_plca_status(dev->phydev, &data->plca_st); + ret = ops->get_plca_status(req_base->phydev, &data->plca_st); ethnl_ops_complete(dev); out: return ret; -- 2.43.0
WARNING: multiple messages have this Message-ID (diff)
From: Maxime Chevallier <maxime.chevallier@bootlin.com> To: davem@davemloft.net Cc: "Maxime Chevallier" <maxime.chevallier@bootlin.com>, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, thomas.petazzoni@bootlin.com, "Andrew Lunn" <andrew@lunn.ch>, "Jakub Kicinski" <kuba@kernel.org>, "Eric Dumazet" <edumazet@google.com>, "Paolo Abeni" <pabeni@redhat.com>, "Russell King" <linux@armlinux.org.uk>, linux-arm-kernel@lists.infradead.org, "Christophe Leroy" <christophe.leroy@csgroup.eu>, "Herve Codina" <herve.codina@bootlin.com>, "Florian Fainelli" <f.fainelli@gmail.com>, "Heiner Kallweit" <hkallweit1@gmail.com>, "Vladimir Oltean" <vladimir.oltean@nxp.com>, "Köry Maincent" <kory.maincent@bootlin.com>, "Jesse Brandeburg" <jesse.brandeburg@intel.com>, "Jonathan Corbet" <corbet@lwn.net>, "Marek Behún" <kabel@kernel.org>, "Piergiorgio Beruto" <piergiorgio.beruto@gmail.com>, "Oleksij Rempel" <o.rempel@pengutronix.de>, "Nicolò Veronese" <nicveronese@gmail.com> Subject: [PATCH net-next v4 09/13] net: ethtool: plca: Target the command to the requested PHY Date: Fri, 15 Dec 2023 18:12:31 +0100 [thread overview] Message-ID: <20231215171237.1152563-10-maxime.chevallier@bootlin.com> (raw) In-Reply-To: <20231215171237.1152563-1-maxime.chevallier@bootlin.com> PLCA is a PHY-specific command. Instead of targeting the command towards dev->phydev, use the request to pick the targeted PHY. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> --- V4: No changes V3: No changes V2: New patch net/ethtool/plca.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/net/ethtool/plca.c b/net/ethtool/plca.c index b1e2e3b5027f..2b3e419f4dc2 100644 --- a/net/ethtool/plca.c +++ b/net/ethtool/plca.c @@ -61,7 +61,7 @@ static int plca_get_cfg_prepare_data(const struct ethnl_req_info *req_base, int ret; // check that the PHY device is available and connected - if (!dev->phydev) { + if (!req_base->phydev) { ret = -EOPNOTSUPP; goto out; } @@ -80,7 +80,7 @@ static int plca_get_cfg_prepare_data(const struct ethnl_req_info *req_base, memset(&data->plca_cfg, 0xff, sizeof_field(struct plca_reply_data, plca_cfg)); - ret = ops->get_plca_cfg(dev->phydev, &data->plca_cfg); + ret = ops->get_plca_cfg(req_base->phydev, &data->plca_cfg); ethnl_ops_complete(dev); out: @@ -141,7 +141,6 @@ const struct nla_policy ethnl_plca_set_cfg_policy[] = { static int ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info) { - struct net_device *dev = req_info->dev; const struct ethtool_phy_ops *ops; struct nlattr **tb = info->attrs; struct phy_plca_cfg plca_cfg; @@ -149,7 +148,7 @@ ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info) int ret; // check that the PHY device is available and connected - if (!dev->phydev) + if (!req_info->phydev) return -EOPNOTSUPP; ops = ethtool_phy_ops; @@ -168,7 +167,7 @@ ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info) if (!mod) return 0; - ret = ops->set_plca_cfg(dev->phydev, &plca_cfg, info->extack); + ret = ops->set_plca_cfg(req_info->phydev, &plca_cfg, info->extack); return ret < 0 ? ret : 1; } @@ -204,7 +203,7 @@ static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base, int ret; // check that the PHY device is available and connected - if (!dev->phydev) { + if (!req_base->phydev) { ret = -EOPNOTSUPP; goto out; } @@ -223,7 +222,7 @@ static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base, memset(&data->plca_st, 0xff, sizeof_field(struct plca_reply_data, plca_st)); - ret = ops->get_plca_status(dev->phydev, &data->plca_st); + ret = ops->get_plca_status(req_base->phydev, &data->plca_st); ethnl_ops_complete(dev); out: return ret; -- 2.43.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-12-15 17:12 UTC|newest] Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-12-15 17:12 [PATCH net-next v4 00/13] Introduce PHY listing and link_topology tracking Maxime Chevallier 2023-12-15 17:12 ` Maxime Chevallier 2023-12-15 17:12 ` [PATCH net-next v4 01/13] net: phy: Introduce ethernet link topology representation Maxime Chevallier 2023-12-15 17:12 ` Maxime Chevallier 2023-12-15 21:45 ` Vladimir Oltean 2023-12-15 21:45 ` Vladimir Oltean 2023-12-17 16:57 ` Andrew Lunn 2023-12-17 16:57 ` Andrew Lunn 2023-12-18 8:49 ` Maxime Chevallier 2023-12-18 8:49 ` Maxime Chevallier 2023-12-18 9:11 ` Maxime Chevallier 2023-12-18 9:11 ` Maxime Chevallier 2023-12-18 6:04 ` kernel test robot 2023-12-18 6:04 ` kernel test robot 2023-12-18 8:10 ` kernel test robot 2023-12-18 8:10 ` kernel test robot 2023-12-15 17:12 ` [PATCH net-next v4 02/13] net: sfp: pass the phy_device when disconnecting an sfp module's PHY Maxime Chevallier 2023-12-15 17:12 ` Maxime Chevallier 2023-12-15 17:12 ` [PATCH net-next v4 03/13] net: phy: add helpers to handle sfp phy connect/disconnect Maxime Chevallier 2023-12-15 17:12 ` Maxime Chevallier 2023-12-15 17:12 ` [PATCH net-next v4 04/13] net: sfp: Add helper to return the SFP bus name Maxime Chevallier 2023-12-15 17:12 ` Maxime Chevallier 2023-12-17 17:07 ` Andrew Lunn 2023-12-17 17:07 ` Andrew Lunn 2023-12-15 17:12 ` [PATCH net-next v4 05/13] net: ethtool: Allow passing a phy index for some commands Maxime Chevallier 2023-12-15 17:12 ` Maxime Chevallier 2023-12-16 11:48 ` kernel test robot 2023-12-16 11:48 ` kernel test robot 2023-12-17 17:11 ` Andrew Lunn 2023-12-17 17:11 ` Andrew Lunn 2023-12-15 17:12 ` [PATCH net-next v4 06/13] netlink: specs: add phy-index as a header parameter Maxime Chevallier 2023-12-15 17:12 ` Maxime Chevallier 2023-12-17 17:11 ` Andrew Lunn 2023-12-17 17:11 ` Andrew Lunn 2023-12-15 17:12 ` [PATCH net-next v4 07/13] net: ethtool: Introduce a command to list PHYs on an interface Maxime Chevallier 2023-12-15 17:12 ` Maxime Chevallier 2023-12-19 8:55 ` Simon Horman 2023-12-19 8:55 ` Simon Horman 2023-12-15 17:12 ` [PATCH net-next v4 08/13] netlink: specs: add ethnl PHY_GET command set Maxime Chevallier 2023-12-15 17:12 ` Maxime Chevallier 2023-12-15 17:12 ` Maxime Chevallier [this message] 2023-12-15 17:12 ` [PATCH net-next v4 09/13] net: ethtool: plca: Target the command to the requested PHY Maxime Chevallier 2023-12-18 9:55 ` Andrew Lunn 2023-12-18 9:55 ` Andrew Lunn 2023-12-15 17:12 ` [PATCH net-next v4 10/13] net: ethtool: pse-pd: " Maxime Chevallier 2023-12-15 17:12 ` Maxime Chevallier 2023-12-18 9:58 ` Andrew Lunn 2023-12-18 9:58 ` Andrew Lunn 2023-12-21 17:31 ` Maxime Chevallier 2023-12-21 17:31 ` Maxime Chevallier 2023-12-15 17:12 ` [PATCH net-next v4 11/13] net: ethtool: cable-test: " Maxime Chevallier 2023-12-15 17:12 ` Maxime Chevallier 2023-12-18 9:58 ` Andrew Lunn 2023-12-18 9:58 ` Andrew Lunn 2023-12-15 17:12 ` [PATCH net-next v4 12/13] net: ethtool: strset: Allow querying phy stats by index Maxime Chevallier 2023-12-15 17:12 ` Maxime Chevallier 2023-12-18 10:00 ` Andrew Lunn 2023-12-18 10:00 ` Andrew Lunn 2023-12-15 17:12 ` [PATCH net-next v4 13/13] Documentation: networking: document phy_link_topology Maxime Chevallier 2023-12-15 17:12 ` Maxime Chevallier 2023-12-18 10:10 ` Andrew Lunn 2023-12-18 10:10 ` Andrew Lunn 2023-12-19 8:58 ` Simon Horman 2023-12-19 8:58 ` Simon Horman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20231215171237.1152563-10-maxime.chevallier@bootlin.com \ --to=maxime.chevallier@bootlin.com \ --cc=andrew@lunn.ch \ --cc=christophe.leroy@csgroup.eu \ --cc=corbet@lwn.net \ --cc=davem@davemloft.net \ --cc=edumazet@google.com \ --cc=f.fainelli@gmail.com \ --cc=herve.codina@bootlin.com \ --cc=hkallweit1@gmail.com \ --cc=jesse.brandeburg@intel.com \ --cc=kabel@kernel.org \ --cc=kory.maincent@bootlin.com \ --cc=kuba@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=netdev@vger.kernel.org \ --cc=nicveronese@gmail.com \ --cc=o.rempel@pengutronix.de \ --cc=pabeni@redhat.com \ --cc=piergiorgio.beruto@gmail.com \ --cc=thomas.petazzoni@bootlin.com \ --cc=vladimir.oltean@nxp.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.