From: Alain Volmat <alain.volmat@foss.st.com> To: Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Alexandre Torgue <alexandre.torgue@foss.st.com>, Alain Volmat <alain.volmat@foss.st.com>, Erwan Leray <erwan.leray@foss.st.com>, Fabrice Gasnier <fabrice.gasnier@foss.st.com> Cc: <linux-spi@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-stm32@st-md-mailman.stormreply.com>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org> Subject: [PATCH 6/6] arm64: dts: st: add spi3 / spi8 properties on stm32mp257f-ev1 Date: Mon, 18 Dec 2023 16:57:18 +0100 [thread overview] Message-ID: <20231218155721.359198-7-alain.volmat@foss.st.com> (raw) In-Reply-To: <20231218155721.359198-1-alain.volmat@foss.st.com> Add properties for spi3 and spi8 available on the stm32mp257f-ev1. Both are kept disabled since only used via the gpio expansion connector. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> --- arch/arm64/boot/dts/st/stm32mp257f-ev1.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts index b2d3afb15758..1ea3c82ca477 100644 --- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts +++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts @@ -68,6 +68,20 @@ &sdmmc1 { status = "okay"; }; +&spi3 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi3_pins_a>; + pinctrl-1 = <&spi3_sleep_pins_a>; + status = "disabled"; +}; + +&spi8 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi8_pins_a>; + pinctrl-1 = <&spi8_sleep_pins_a>; + status = "disabled"; +}; + &usart2 { pinctrl-names = "default", "idle", "sleep"; pinctrl-0 = <&usart2_pins_a>; -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Alain Volmat <alain.volmat@foss.st.com> To: Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Alexandre Torgue <alexandre.torgue@foss.st.com>, Alain Volmat <alain.volmat@foss.st.com>, Erwan Leray <erwan.leray@foss.st.com>, Fabrice Gasnier <fabrice.gasnier@foss.st.com> Cc: <linux-spi@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-stm32@st-md-mailman.stormreply.com>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org> Subject: [PATCH 6/6] arm64: dts: st: add spi3 / spi8 properties on stm32mp257f-ev1 Date: Mon, 18 Dec 2023 16:57:18 +0100 [thread overview] Message-ID: <20231218155721.359198-7-alain.volmat@foss.st.com> (raw) In-Reply-To: <20231218155721.359198-1-alain.volmat@foss.st.com> Add properties for spi3 and spi8 available on the stm32mp257f-ev1. Both are kept disabled since only used via the gpio expansion connector. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> --- arch/arm64/boot/dts/st/stm32mp257f-ev1.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts index b2d3afb15758..1ea3c82ca477 100644 --- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts +++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts @@ -68,6 +68,20 @@ &sdmmc1 { status = "okay"; }; +&spi3 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi3_pins_a>; + pinctrl-1 = <&spi3_sleep_pins_a>; + status = "disabled"; +}; + +&spi8 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi8_pins_a>; + pinctrl-1 = <&spi8_sleep_pins_a>; + status = "disabled"; +}; + &usart2 { pinctrl-names = "default", "idle", "sleep"; pinctrl-0 = <&usart2_pins_a>; -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-12-18 16:01 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-12-18 15:57 [PATCH 0/6] spi: stm32: add support for stm32mp25 Alain Volmat 2023-12-18 15:57 ` Alain Volmat 2023-12-18 15:57 ` [PATCH 1/6] spi: stm32: use dma_get_slave_caps prior to configuring dma channel Alain Volmat 2023-12-18 15:57 ` Alain Volmat 2023-12-18 15:57 ` [PATCH 2/6] dt-bindings: spi: stm32: add st,stm32mp25-spi compatible Alain Volmat 2023-12-18 15:57 ` Alain Volmat 2023-12-18 16:58 ` Fabrice Gasnier 2023-12-18 16:58 ` Fabrice Gasnier 2023-12-19 16:39 ` Conor Dooley 2023-12-19 16:39 ` Conor Dooley 2023-12-18 15:57 ` [PATCH 3/6] spi: stm32: add st,stm32mp25-spi compatible supporting STM32MP25 soc Alain Volmat 2023-12-18 15:57 ` Alain Volmat 2023-12-18 15:57 ` [PATCH 4/6] arm64: dts: st: add all 8 spi nodes on stm32mp251 Alain Volmat 2023-12-18 15:57 ` Alain Volmat 2023-12-18 15:57 ` [PATCH 5/6] arm64: dts: st: add spi3/spi8 pins for stm32mp25 Alain Volmat 2023-12-18 15:57 ` Alain Volmat 2023-12-18 15:57 ` Alain Volmat [this message] 2023-12-18 15:57 ` [PATCH 6/6] arm64: dts: st: add spi3 / spi8 properties on stm32mp257f-ev1 Alain Volmat 2023-12-22 13:30 ` (subset) [PATCH 0/6] spi: stm32: add support for stm32mp25 Mark Brown 2023-12-22 13:30 ` Mark Brown 2024-04-25 8:21 ` Alexandre TORGUE 2024-04-25 8:21 ` Alexandre TORGUE
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20231218155721.359198-7-alain.volmat@foss.st.com \ --to=alain.volmat@foss.st.com \ --cc=alexandre.torgue@foss.st.com \ --cc=broonie@kernel.org \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=erwan.leray@foss.st.com \ --cc=fabrice.gasnier@foss.st.com \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-spi@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=mcoquelin.stm32@gmail.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.