From: Luo Jie <quic_luoj@quicinc.com>
To: <andersson@kernel.org>, <konrad.dybcio@linaro.org>,
<mturquette@baylibre.com>, <sboyd@kernel.org>,
<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
<conor+dt@kernel.org>, <p.zabel@pengutronix.de>
Cc: <linux-arm-msm@vger.kernel.org>, <linux-clk@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<quic_srichara@quicinc.com>, Rob Herring <robh@kernel.org>
Subject: [PATCH v13 2/4] dt-bindings: clock: add qca8386/qca8084 clock and reset definitions
Date: Tue, 19 Dec 2023 22:02:27 +0800 [thread overview]
Message-ID: <20231219140229.19062-3-quic_luoj@quicinc.com> (raw)
In-Reply-To: <20231219140229.19062-1-quic_luoj@quicinc.com>
QCA8386/QCA8084 includes the clock & reset controller that is
accessed by MDIO bus. Two work modes are supported, qca8386 works
as switch mode, qca8084 works as PHY mode.
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../bindings/clock/qcom,qca8k-nsscc.yaml | 79 ++++++++++++++
include/dt-bindings/clock/qcom,qca8k-nsscc.h | 101 ++++++++++++++++++
include/dt-bindings/reset/qcom,qca8k-nsscc.h | 75 +++++++++++++
3 files changed, 255 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,qca8k-nsscc.yaml
create mode 100644 include/dt-bindings/clock/qcom,qca8k-nsscc.h
create mode 100644 include/dt-bindings/reset/qcom,qca8k-nsscc.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,qca8k-nsscc.yaml b/Documentation/devicetree/bindings/clock/qcom,qca8k-nsscc.yaml
new file mode 100644
index 000000000000..21e7c4150b6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,qca8k-nsscc.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qca8k-nsscc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm NSS Clock & Reset Controller on QCA8386/QCA8084
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Luo Jie <quic_luoj@quicinc.com>
+
+description: |
+ Qualcomm NSS clock control module provides the clocks and resets
+ on QCA8386(switch mode)/QCA8084(PHY mode)
+
+ See also::
+ include/dt-bindings/clock/qcom,qca8k-nsscc.h
+ include/dt-bindings/reset/qcom,qca8k-nsscc.h
+
+properties:
+ compatible:
+ oneOf:
+ - const: qcom,qca8084-nsscc
+ - items:
+ - enum:
+ - qcom,qca8082-nsscc
+ - qcom,qca8085-nsscc
+ - qcom,qca8384-nsscc
+ - qcom,qca8385-nsscc
+ - qcom,qca8386-nsscc
+ - const: qcom,qca8084-nsscc
+
+ clocks:
+ items:
+ - description: Chip XO source
+ - description: UNIPHY0 RX 312P5M/125M clock source
+ - description: UNIPHY0 TX 312P5M/125M clock source
+ - description: UNIPHY1 RX 312P5M/125M clock source
+ - description: UNIPHY1 TX 312P5M/125M clock source
+ - description: UNIPHY1 RX 312P5M clock source
+ - description: UNIPHY1 TX 312P5M clock source
+
+ reg:
+ items:
+ - description: MDIO bus address for Clock & Reset Controller register
+
+required:
+ - compatible
+ - clocks
+ - reg
+
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clock-controller@18 {
+ compatible = "qcom,qca8084-nsscc";
+ reg = <0x18>;
+ clocks = <&qca8k_xo>,
+ <&qca8k_uniphy0_rx>,
+ <&qca8k_uniphy0_tx>,
+ <&qca8k_uniphy1_rx>,
+ <&qca8k_uniphy1_tx>,
+ <&qca8k_uniphy1_rx312p5m>,
+ <&qca8k_uniphy1_tx312p5m>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+ };
+...
diff --git a/include/dt-bindings/clock/qcom,qca8k-nsscc.h b/include/dt-bindings/clock/qcom,qca8k-nsscc.h
new file mode 100644
index 000000000000..0ac3e4c69a1a
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,qca8k-nsscc.h
@@ -0,0 +1,101 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_QCA8K_NSS_CC_H
+#define _DT_BINDINGS_CLK_QCOM_QCA8K_NSS_CC_H
+
+#define NSS_CC_SWITCH_CORE_CLK_SRC 0
+#define NSS_CC_SWITCH_CORE_CLK 1
+#define NSS_CC_APB_BRIDGE_CLK 2
+#define NSS_CC_MAC0_TX_CLK_SRC 3
+#define NSS_CC_MAC0_TX_DIV_CLK_SRC 4
+#define NSS_CC_MAC0_TX_CLK 5
+#define NSS_CC_MAC0_TX_SRDS1_CLK 6
+#define NSS_CC_MAC0_RX_CLK_SRC 7
+#define NSS_CC_MAC0_RX_DIV_CLK_SRC 8
+#define NSS_CC_MAC0_RX_CLK 9
+#define NSS_CC_MAC0_RX_SRDS1_CLK 10
+#define NSS_CC_MAC1_TX_CLK_SRC 11
+#define NSS_CC_MAC1_TX_DIV_CLK_SRC 12
+#define NSS_CC_MAC1_SRDS1_CH0_XGMII_RX_DIV_CLK_SRC 13
+#define NSS_CC_MAC1_SRDS1_CH0_RX_CLK 14
+#define NSS_CC_MAC1_TX_CLK 15
+#define NSS_CC_MAC1_GEPHY0_TX_CLK 16
+#define NSS_CC_MAC1_SRDS1_CH0_XGMII_RX_CLK 17
+#define NSS_CC_MAC1_RX_CLK_SRC 18
+#define NSS_CC_MAC1_RX_DIV_CLK_SRC 19
+#define NSS_CC_MAC1_SRDS1_CH0_XGMII_TX_DIV_CLK_SRC 20
+#define NSS_CC_MAC1_SRDS1_CH0_TX_CLK 21
+#define NSS_CC_MAC1_RX_CLK 22
+#define NSS_CC_MAC1_GEPHY0_RX_CLK 23
+#define NSS_CC_MAC1_SRDS1_CH0_XGMII_TX_CLK 24
+#define NSS_CC_MAC2_TX_CLK_SRC 25
+#define NSS_CC_MAC2_TX_DIV_CLK_SRC 26
+#define NSS_CC_MAC2_SRDS1_CH1_XGMII_RX_DIV_CLK_SRC 27
+#define NSS_CC_MAC2_SRDS1_CH1_RX_CLK 28
+#define NSS_CC_MAC2_TX_CLK 29
+#define NSS_CC_MAC2_GEPHY1_TX_CLK 30
+#define NSS_CC_MAC2_SRDS1_CH1_XGMII_RX_CLK 31
+#define NSS_CC_MAC2_RX_CLK_SRC 32
+#define NSS_CC_MAC2_RX_DIV_CLK_SRC 33
+#define NSS_CC_MAC2_SRDS1_CH1_XGMII_TX_DIV_CLK_SRC 34
+#define NSS_CC_MAC2_SRDS1_CH1_TX_CLK 35
+#define NSS_CC_MAC2_RX_CLK 36
+#define NSS_CC_MAC2_GEPHY1_RX_CLK 37
+#define NSS_CC_MAC2_SRDS1_CH1_XGMII_TX_CLK 38
+#define NSS_CC_MAC3_TX_CLK_SRC 39
+#define NSS_CC_MAC3_TX_DIV_CLK_SRC 40
+#define NSS_CC_MAC3_SRDS1_CH2_XGMII_RX_DIV_CLK_SRC 41
+#define NSS_CC_MAC3_SRDS1_CH2_RX_CLK 42
+#define NSS_CC_MAC3_TX_CLK 43
+#define NSS_CC_MAC3_GEPHY2_TX_CLK 44
+#define NSS_CC_MAC3_SRDS1_CH2_XGMII_RX_CLK 45
+#define NSS_CC_MAC3_RX_CLK_SRC 46
+#define NSS_CC_MAC3_RX_DIV_CLK_SRC 47
+#define NSS_CC_MAC3_SRDS1_CH2_XGMII_TX_DIV_CLK_SRC 48
+#define NSS_CC_MAC3_SRDS1_CH2_TX_CLK 49
+#define NSS_CC_MAC3_RX_CLK 50
+#define NSS_CC_MAC3_GEPHY2_RX_CLK 51
+#define NSS_CC_MAC3_SRDS1_CH2_XGMII_TX_CLK 52
+#define NSS_CC_MAC4_TX_CLK_SRC 53
+#define NSS_CC_MAC4_TX_DIV_CLK_SRC 54
+#define NSS_CC_MAC4_SRDS1_CH3_XGMII_RX_DIV_CLK_SRC 55
+#define NSS_CC_MAC4_SRDS1_CH3_RX_CLK 56
+#define NSS_CC_MAC4_TX_CLK 57
+#define NSS_CC_MAC4_GEPHY3_TX_CLK 58
+#define NSS_CC_MAC4_SRDS1_CH3_XGMII_RX_CLK 59
+#define NSS_CC_MAC4_RX_CLK_SRC 60
+#define NSS_CC_MAC4_RX_DIV_CLK_SRC 61
+#define NSS_CC_MAC4_SRDS1_CH3_XGMII_TX_DIV_CLK_SRC 62
+#define NSS_CC_MAC4_SRDS1_CH3_TX_CLK 63
+#define NSS_CC_MAC4_RX_CLK 64
+#define NSS_CC_MAC4_GEPHY3_RX_CLK 65
+#define NSS_CC_MAC4_SRDS1_CH3_XGMII_TX_CLK 66
+#define NSS_CC_MAC5_TX_CLK_SRC 67
+#define NSS_CC_MAC5_TX_DIV_CLK_SRC 68
+#define NSS_CC_MAC5_TX_SRDS0_CLK 69
+#define NSS_CC_MAC5_TX_CLK 70
+#define NSS_CC_MAC5_RX_CLK_SRC 71
+#define NSS_CC_MAC5_RX_DIV_CLK_SRC 72
+#define NSS_CC_MAC5_RX_SRDS0_CLK 73
+#define NSS_CC_MAC5_RX_CLK 74
+#define NSS_CC_MAC5_TX_SRDS0_CLK_SRC 75
+#define NSS_CC_MAC5_RX_SRDS0_CLK_SRC 76
+#define NSS_CC_AHB_CLK_SRC 77
+#define NSS_CC_AHB_CLK 78
+#define NSS_CC_SEC_CTRL_AHB_CLK 79
+#define NSS_CC_TLMM_CLK 80
+#define NSS_CC_TLMM_AHB_CLK 81
+#define NSS_CC_CNOC_AHB_CLK 82
+#define NSS_CC_MDIO_AHB_CLK 83
+#define NSS_CC_MDIO_MASTER_AHB_CLK 84
+#define NSS_CC_SYS_CLK_SRC 85
+#define NSS_CC_SRDS0_SYS_CLK 86
+#define NSS_CC_SRDS1_SYS_CLK 87
+#define NSS_CC_GEPHY0_SYS_CLK 88
+#define NSS_CC_GEPHY1_SYS_CLK 89
+#define NSS_CC_GEPHY2_SYS_CLK 90
+#define NSS_CC_GEPHY3_SYS_CLK 91
+#endif
diff --git a/include/dt-bindings/reset/qcom,qca8k-nsscc.h b/include/dt-bindings/reset/qcom,qca8k-nsscc.h
new file mode 100644
index 000000000000..79121a513823
--- /dev/null
+++ b/include/dt-bindings/reset/qcom,qca8k-nsscc.h
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_RESET_QCOM_QCA8K_NSS_CC_H
+#define _DT_BINDINGS_RESET_QCOM_QCA8K_NSS_CC_H
+
+#define NSS_CC_SWITCH_CORE_ARES 1
+#define NSS_CC_APB_BRIDGE_ARES 2
+#define NSS_CC_MAC0_TX_ARES 3
+#define NSS_CC_MAC0_TX_SRDS1_ARES 4
+#define NSS_CC_MAC0_RX_ARES 5
+#define NSS_CC_MAC0_RX_SRDS1_ARES 6
+#define NSS_CC_MAC1_SRDS1_CH0_RX_ARES 7
+#define NSS_CC_MAC1_TX_ARES 8
+#define NSS_CC_MAC1_GEPHY0_TX_ARES 9
+#define NSS_CC_MAC1_SRDS1_CH0_XGMII_RX_ARES 10
+#define NSS_CC_MAC1_SRDS1_CH0_TX_ARES 11
+#define NSS_CC_MAC1_RX_ARES 12
+#define NSS_CC_MAC1_GEPHY0_RX_ARES 13
+#define NSS_CC_MAC1_SRDS1_CH0_XGMII_TX_ARES 14
+#define NSS_CC_MAC2_SRDS1_CH1_RX_ARES 15
+#define NSS_CC_MAC2_TX_ARES 16
+#define NSS_CC_MAC2_GEPHY1_TX_ARES 17
+#define NSS_CC_MAC2_SRDS1_CH1_XGMII_RX_ARES 18
+#define NSS_CC_MAC2_SRDS1_CH1_TX_ARES 19
+#define NSS_CC_MAC2_RX_ARES 20
+#define NSS_CC_MAC2_GEPHY1_RX_ARES 21
+#define NSS_CC_MAC2_SRDS1_CH1_XGMII_TX_ARES 22
+#define NSS_CC_MAC3_SRDS1_CH2_RX_ARES 23
+#define NSS_CC_MAC3_TX_ARES 24
+#define NSS_CC_MAC3_GEPHY2_TX_ARES 25
+#define NSS_CC_MAC3_SRDS1_CH2_XGMII_RX_ARES 26
+#define NSS_CC_MAC3_SRDS1_CH2_TX_ARES 27
+#define NSS_CC_MAC3_RX_ARES 28
+#define NSS_CC_MAC3_GEPHY2_RX_ARES 29
+#define NSS_CC_MAC3_SRDS1_CH2_XGMII_TX_ARES 30
+#define NSS_CC_MAC4_SRDS1_CH3_RX_ARES 31
+#define NSS_CC_MAC4_TX_ARES 32
+#define NSS_CC_MAC4_GEPHY3_TX_ARES 33
+#define NSS_CC_MAC4_SRDS1_CH3_XGMII_RX_ARES 34
+#define NSS_CC_MAC4_SRDS1_CH3_TX_ARES 35
+#define NSS_CC_MAC4_RX_ARES 36
+#define NSS_CC_MAC4_GEPHY3_RX_ARES 37
+#define NSS_CC_MAC4_SRDS1_CH3_XGMII_TX_ARES 38
+#define NSS_CC_MAC5_TX_ARES 39
+#define NSS_CC_MAC5_TX_SRDS0_ARES 40
+#define NSS_CC_MAC5_RX_ARES 41
+#define NSS_CC_MAC5_RX_SRDS0_ARES 42
+#define NSS_CC_AHB_ARES 43
+#define NSS_CC_SEC_CTRL_AHB_ARES 44
+#define NSS_CC_TLMM_ARES 45
+#define NSS_CC_TLMM_AHB_ARES 46
+#define NSS_CC_CNOC_AHB_ARES 47
+#define NSS_CC_MDIO_AHB_ARES 48
+#define NSS_CC_MDIO_MASTER_AHB_ARES 49
+#define NSS_CC_SRDS0_SYS_ARES 50
+#define NSS_CC_SRDS1_SYS_ARES 51
+#define NSS_CC_GEPHY0_SYS_ARES 52
+#define NSS_CC_GEPHY1_SYS_ARES 53
+#define NSS_CC_GEPHY2_SYS_ARES 54
+#define NSS_CC_GEPHY3_SYS_ARES 55
+#define NSS_CC_SEC_CTRL_ARES 56
+#define NSS_CC_SEC_CTRL_SENSE_ARES 57
+#define NSS_CC_SLEEP_ARES 58
+#define NSS_CC_DEBUG_ARES 59
+#define NSS_CC_GEPHY0_ARES 60
+#define NSS_CC_GEPHY1_ARES 61
+#define NSS_CC_GEPHY2_ARES 62
+#define NSS_CC_GEPHY3_ARES 63
+#define NSS_CC_DSP_ARES 64
+#define NSS_CC_GLOBAL_ARES 65
+#define NSS_CC_XPCS_ARES 66
+#endif
--
2.42.0
next prev parent reply other threads:[~2023-12-19 14:03 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-19 14:02 [PATCH v13 0/4] add clock controller of qca8386/qca8084 Luo Jie
2023-12-19 14:02 ` [PATCH v13 1/4] clk: qcom: branch: Add clk_branch2_prepare_ops Luo Jie
2023-12-19 14:02 ` Luo Jie [this message]
2023-12-19 14:02 ` [PATCH v13 3/4] clk: qcom: common: commonize qcom_cc_really_probe Luo Jie
2023-12-19 14:02 ` [PATCH v13 4/4] clk: qcom: add clock controller driver for qca8386/qca8084 Luo Jie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231219140229.19062-3-quic_luoj@quicinc.com \
--to=quic_luoj@quicinc.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=quic_srichara@quicinc.com \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.