All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>,
	Conor Dooley <conor+dt@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Mathias Nyman <mathias.nyman@intel.com>,
	<linux-usb@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Eddie Hung <eddie.hung@mediatek.com>,
	Macpaul Lin <macpaul.lin@mediatek.com>
Subject: [PATCH v4 2/3] usb: xhci-mtk: fix a short packet issue of gen1 isoc-in transfer
Date: Wed, 27 Dec 2023 14:03:15 +0800	[thread overview]
Message-ID: <20231227060316.8539-2-chunfeng.yun@mediatek.com> (raw)
In-Reply-To: <20231227060316.8539-1-chunfeng.yun@mediatek.com>

For Gen1 isoc-in transfer, host still send out unexpected ACK after device
finish the burst with a short packet, this will cause an exception on the
connected device, such as, a usb 4k camera.
It can be fixed by setting rxfifo depth less than 4k bytes, prefer to use
3k here, the side-effect is that may cause performance drop about 10%,
including bulk transfer.

Fixes: 926d60ae64a6 ("usb: xhci-mtk: modify the SOF/ITP interval for mt8195")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v4:
drop Cc stable
add reviewed-by Angelo
change rxfifo depth in bytes
v3:
add Cc stable
change @rxfifo_depth from int to u32, due to property's value range is changed
v2:
use 'rx-fifo-depth' property;
add header file 'linux/bitfield.h' to avoid building error on some ARCH;
---
 drivers/usb/host/xhci-mtk.c | 40 +++++++++++++++++++++++++++++++++++--
 drivers/usb/host/xhci-mtk.h |  2 ++
 2 files changed, 40 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index bbdf1b0b7be1..3252e3d2d79c 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -7,6 +7,7 @@
  *  Chunfeng Yun <chunfeng.yun@mediatek.com>
  */
 
+#include <linux/bitfield.h>
 #include <linux/dma-mapping.h>
 #include <linux/iopoll.h>
 #include <linux/kernel.h>
@@ -73,6 +74,9 @@
 #define FRMCNT_LEV1_RANG	(0x12b << 8)
 #define FRMCNT_LEV1_RANG_MASK	GENMASK(19, 8)
 
+#define HSCH_CFG1		0x960
+#define SCH3_RXFIFO_DEPTH_MASK	GENMASK(21, 20)
+
 #define SS_GEN2_EOF_CFG		0x990
 #define SSG2EOF_OFFSET		0x3c
 
@@ -114,6 +118,8 @@
 #define SSC_IP_SLEEP_EN	BIT(4)
 #define SSC_SPM_INT_EN		BIT(1)
 
+#define SCH_FIFO_TO_KB(x)	((x) >> 10)
+
 enum ssusb_uwk_vers {
 	SSUSB_UWK_V1 = 1,
 	SSUSB_UWK_V2,
@@ -165,6 +171,35 @@ static void xhci_mtk_set_frame_interval(struct xhci_hcd_mtk *mtk)
 	writel(value, hcd->regs + SS_GEN2_EOF_CFG);
 }
 
+/*
+ * workaround: usb3.2 gen1 isoc rx hw issue
+ * host send out unexpected ACK afer device fininsh a burst transfer with
+ * a short packet.
+ */
+static void xhci_mtk_rxfifo_depth_set(struct xhci_hcd_mtk *mtk)
+{
+	struct usb_hcd *hcd = mtk->hcd;
+	u32 value;
+
+	if (!mtk->rxfifo_depth)
+		return;
+
+	value = readl(hcd->regs + HSCH_CFG1);
+	value &= ~SCH3_RXFIFO_DEPTH_MASK;
+	value |= FIELD_PREP(SCH3_RXFIFO_DEPTH_MASK,
+			    SCH_FIFO_TO_KB(mtk->rxfifo_depth) - 1);
+	writel(value, hcd->regs + HSCH_CFG1);
+}
+
+static void xhci_mtk_init_quirk(struct xhci_hcd_mtk *mtk)
+{
+	/* workaround only for mt8195 */
+	xhci_mtk_set_frame_interval(mtk);
+
+	/* workaround for SoCs using SSUSB about before IPM v1.6.0 */
+	xhci_mtk_rxfifo_depth_set(mtk);
+}
+
 static int xhci_mtk_host_enable(struct xhci_hcd_mtk *mtk)
 {
 	struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs;
@@ -448,8 +483,7 @@ static int xhci_mtk_setup(struct usb_hcd *hcd)
 		if (ret)
 			return ret;
 
-		/* workaround only for mt8195 */
-		xhci_mtk_set_frame_interval(mtk);
+		xhci_mtk_init_quirk(mtk);
 	}
 
 	ret = xhci_gen_setup(hcd, xhci_mtk_quirks);
@@ -527,6 +561,8 @@ static int xhci_mtk_probe(struct platform_device *pdev)
 	of_property_read_u32(node, "mediatek,u2p-dis-msk",
 			     &mtk->u2p_dis_msk);
 
+	of_property_read_u32(node, "rx-fifo-depth", &mtk->rxfifo_depth);
+
 	ret = usb_wakeup_of_property_parse(mtk, node);
 	if (ret) {
 		dev_err(dev, "failed to parse uwk property\n");
diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h
index 39f7ae7d3087..f5e2bd66bb1b 100644
--- a/drivers/usb/host/xhci-mtk.h
+++ b/drivers/usb/host/xhci-mtk.h
@@ -171,6 +171,8 @@ struct xhci_hcd_mtk {
 	struct regmap *uwk;
 	u32 uwk_reg_base;
 	u32 uwk_vers;
+	/* quirk */
+	u32 rxfifo_depth;
 };
 
 static inline struct xhci_hcd_mtk *hcd_to_mtk(struct usb_hcd *hcd)
-- 
2.18.0


WARNING: multiple messages have this Message-ID (diff)
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>,
	Conor Dooley <conor+dt@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Mathias Nyman <mathias.nyman@intel.com>,
	<linux-usb@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Eddie Hung <eddie.hung@mediatek.com>,
	Macpaul Lin <macpaul.lin@mediatek.com>
Subject: [PATCH v4 2/3] usb: xhci-mtk: fix a short packet issue of gen1 isoc-in transfer
Date: Wed, 27 Dec 2023 14:03:15 +0800	[thread overview]
Message-ID: <20231227060316.8539-2-chunfeng.yun@mediatek.com> (raw)
In-Reply-To: <20231227060316.8539-1-chunfeng.yun@mediatek.com>

For Gen1 isoc-in transfer, host still send out unexpected ACK after device
finish the burst with a short packet, this will cause an exception on the
connected device, such as, a usb 4k camera.
It can be fixed by setting rxfifo depth less than 4k bytes, prefer to use
3k here, the side-effect is that may cause performance drop about 10%,
including bulk transfer.

Fixes: 926d60ae64a6 ("usb: xhci-mtk: modify the SOF/ITP interval for mt8195")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v4:
drop Cc stable
add reviewed-by Angelo
change rxfifo depth in bytes
v3:
add Cc stable
change @rxfifo_depth from int to u32, due to property's value range is changed
v2:
use 'rx-fifo-depth' property;
add header file 'linux/bitfield.h' to avoid building error on some ARCH;
---
 drivers/usb/host/xhci-mtk.c | 40 +++++++++++++++++++++++++++++++++++--
 drivers/usb/host/xhci-mtk.h |  2 ++
 2 files changed, 40 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index bbdf1b0b7be1..3252e3d2d79c 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -7,6 +7,7 @@
  *  Chunfeng Yun <chunfeng.yun@mediatek.com>
  */
 
+#include <linux/bitfield.h>
 #include <linux/dma-mapping.h>
 #include <linux/iopoll.h>
 #include <linux/kernel.h>
@@ -73,6 +74,9 @@
 #define FRMCNT_LEV1_RANG	(0x12b << 8)
 #define FRMCNT_LEV1_RANG_MASK	GENMASK(19, 8)
 
+#define HSCH_CFG1		0x960
+#define SCH3_RXFIFO_DEPTH_MASK	GENMASK(21, 20)
+
 #define SS_GEN2_EOF_CFG		0x990
 #define SSG2EOF_OFFSET		0x3c
 
@@ -114,6 +118,8 @@
 #define SSC_IP_SLEEP_EN	BIT(4)
 #define SSC_SPM_INT_EN		BIT(1)
 
+#define SCH_FIFO_TO_KB(x)	((x) >> 10)
+
 enum ssusb_uwk_vers {
 	SSUSB_UWK_V1 = 1,
 	SSUSB_UWK_V2,
@@ -165,6 +171,35 @@ static void xhci_mtk_set_frame_interval(struct xhci_hcd_mtk *mtk)
 	writel(value, hcd->regs + SS_GEN2_EOF_CFG);
 }
 
+/*
+ * workaround: usb3.2 gen1 isoc rx hw issue
+ * host send out unexpected ACK afer device fininsh a burst transfer with
+ * a short packet.
+ */
+static void xhci_mtk_rxfifo_depth_set(struct xhci_hcd_mtk *mtk)
+{
+	struct usb_hcd *hcd = mtk->hcd;
+	u32 value;
+
+	if (!mtk->rxfifo_depth)
+		return;
+
+	value = readl(hcd->regs + HSCH_CFG1);
+	value &= ~SCH3_RXFIFO_DEPTH_MASK;
+	value |= FIELD_PREP(SCH3_RXFIFO_DEPTH_MASK,
+			    SCH_FIFO_TO_KB(mtk->rxfifo_depth) - 1);
+	writel(value, hcd->regs + HSCH_CFG1);
+}
+
+static void xhci_mtk_init_quirk(struct xhci_hcd_mtk *mtk)
+{
+	/* workaround only for mt8195 */
+	xhci_mtk_set_frame_interval(mtk);
+
+	/* workaround for SoCs using SSUSB about before IPM v1.6.0 */
+	xhci_mtk_rxfifo_depth_set(mtk);
+}
+
 static int xhci_mtk_host_enable(struct xhci_hcd_mtk *mtk)
 {
 	struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs;
@@ -448,8 +483,7 @@ static int xhci_mtk_setup(struct usb_hcd *hcd)
 		if (ret)
 			return ret;
 
-		/* workaround only for mt8195 */
-		xhci_mtk_set_frame_interval(mtk);
+		xhci_mtk_init_quirk(mtk);
 	}
 
 	ret = xhci_gen_setup(hcd, xhci_mtk_quirks);
@@ -527,6 +561,8 @@ static int xhci_mtk_probe(struct platform_device *pdev)
 	of_property_read_u32(node, "mediatek,u2p-dis-msk",
 			     &mtk->u2p_dis_msk);
 
+	of_property_read_u32(node, "rx-fifo-depth", &mtk->rxfifo_depth);
+
 	ret = usb_wakeup_of_property_parse(mtk, node);
 	if (ret) {
 		dev_err(dev, "failed to parse uwk property\n");
diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h
index 39f7ae7d3087..f5e2bd66bb1b 100644
--- a/drivers/usb/host/xhci-mtk.h
+++ b/drivers/usb/host/xhci-mtk.h
@@ -171,6 +171,8 @@ struct xhci_hcd_mtk {
 	struct regmap *uwk;
 	u32 uwk_reg_base;
 	u32 uwk_vers;
+	/* quirk */
+	u32 rxfifo_depth;
 };
 
 static inline struct xhci_hcd_mtk *hcd_to_mtk(struct usb_hcd *hcd)
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2023-12-27  6:03 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-27  6:03 [PATCH v4 1/3] dt-bindings: usb: mtk-xhci: add a property for Gen1 isoc-in transfer issue Chunfeng Yun
2023-12-27  6:03 ` Chunfeng Yun
2023-12-27  6:03 ` Chunfeng Yun [this message]
2023-12-27  6:03   ` [PATCH v4 2/3] usb: xhci-mtk: fix a short packet issue of gen1 isoc-in transfer Chunfeng Yun
2023-12-27  6:03 ` [PATCH v4 3/3] arm64: dts: mediatek: mt8195: Add 'rx-fifo-depth' for cherry Chunfeng Yun
2023-12-27  6:03   ` Chunfeng Yun
2023-12-27  9:19 ` [PATCH v4 1/3] dt-bindings: usb: mtk-xhci: add a property for Gen1 isoc-in transfer issue Sergey Shtylyov
2023-12-27  9:19   ` Sergey Shtylyov
2024-01-04  7:24   ` Chunfeng Yun (云春峰)
2024-01-04  7:24     ` Chunfeng Yun (云春峰)
2023-12-28 10:44 ` Mathias Nyman
2023-12-28 10:44   ` Mathias Nyman
2024-01-04  6:12   ` Chunfeng Yun (云春峰)
2024-01-04  6:12     ` Chunfeng Yun (云春峰)
2024-01-02  9:31 ` AngeloGioacchino Del Regno
2024-01-02  9:31   ` AngeloGioacchino Del Regno
2024-01-02 21:03 ` Krzysztof Kozlowski
2024-01-02 21:03   ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231227060316.8539-2-chunfeng.yun@mediatek.com \
    --to=chunfeng.yun@mediatek.com \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=eddie.hung@mediatek.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=macpaul.lin@mediatek.com \
    --cc=mathias.nyman@intel.com \
    --cc=matthias.bgg@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.