All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thomas Richard <thomas.richard@bootlin.com>
To: "Linus Walleij" <linus.walleij@linaro.org>,
	"Bartosz Golaszewski" <brgl@bgdev.pl>,
	"Andy Shevchenko" <andy@kernel.org>,
	"Tony Lindgren" <tony@atomide.com>,
	"Haojian Zhuang" <haojian.zhuang@linaro.org>,
	"Vignesh R" <vigneshr@ti.com>,
	"Aaro Koskinen" <aaro.koskinen@iki.fi>,
	"Janusz Krzysztofik" <jmkrzyszt@gmail.com>,
	"Andi Shyti" <andi.shyti@kernel.org>,
	"Peter Rosin" <peda@axentia.se>, "Vinod Koul" <vkoul@kernel.org>,
	"Kishon Vijay Abraham I" <kishon@kernel.org>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Rob Herring" <robh@kernel.org>,
	"Bjorn Helgaas" <bhelgaas@google.com>
Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	 linux-arm-kernel@lists.infradead.org,
	linux-omap@vger.kernel.org,  linux-i2c@vger.kernel.org,
	linux-phy@lists.infradead.org,  linux-pci@vger.kernel.org,
	gregory.clement@bootlin.com,  theo.lebrun@bootlin.com,
	thomas.petazzoni@bootlin.com, u-kumar1@ti.com,
	 Thomas Richard <thomas.richard@bootlin.com>
Subject: [PATCH v3 17/18] PCI: j721e: add reset GPIO to struct j721e_pcie
Date: Thu, 15 Feb 2024 16:18:02 +0100	[thread overview]
Message-ID: <20240102-j7200-pcie-s2r-v3-17-5c2e4a3fac1f@bootlin.com> (raw)
In-Reply-To: <20240102-j7200-pcie-s2r-v3-0-5c2e4a3fac1f@bootlin.com>

From: Théo Lebrun <theo.lebrun@bootlin.com>

Add reset GPIO to struct j721e_pcie, so it can be used at suspend and
resume stages.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
---
 drivers/pci/controller/cadence/pci-j721e.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 2c87e7728a65..9c588e79f5ac 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -54,6 +54,7 @@ struct j721e_pcie {
 	struct clk		*refclk;
 	u32			mode;
 	u32			num_lanes;
+	struct gpio_desc	*reset_gpio;
 	void __iomem		*user_cfg_base;
 	void __iomem		*intd_cfg_base;
 	u32			linkdown_irq_regfield;
@@ -359,7 +360,6 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 	struct j721e_pcie *pcie;
 	struct cdns_pcie_rc *rc = NULL;
 	struct cdns_pcie_ep *ep = NULL;
-	struct gpio_desc *gpiod;
 	void __iomem *base;
 	struct clk *clk;
 	u32 num_lanes;
@@ -468,9 +468,9 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 
 	switch (mode) {
 	case PCI_MODE_RC:
-		gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
-		if (IS_ERR(gpiod)) {
-			ret = PTR_ERR(gpiod);
+		pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+		if (IS_ERR(pcie->reset_gpio)) {
+			ret = PTR_ERR(pcie->reset_gpio);
 			if (ret != -EPROBE_DEFER)
 				dev_err(dev, "Failed to get reset GPIO\n");
 			goto err_get_sync;
@@ -504,9 +504,9 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 		 * mode is selected while enabling the PHY. So deassert PERST#
 		 * after 100 us.
 		 */
-		if (gpiod) {
+		if (pcie->reset_gpio) {
 			usleep_range(100, 200);
-			gpiod_set_value_cansleep(gpiod, 1);
+			gpiod_set_value_cansleep(pcie->reset_gpio, 1);
 		}
 
 		ret = cdns_pcie_host_setup(rc);

-- 
2.39.2


WARNING: multiple messages have this Message-ID (diff)
From: Thomas Richard <thomas.richard@bootlin.com>
To: "Linus Walleij" <linus.walleij@linaro.org>,
	"Bartosz Golaszewski" <brgl@bgdev.pl>,
	"Andy Shevchenko" <andy@kernel.org>,
	"Tony Lindgren" <tony@atomide.com>,
	"Haojian Zhuang" <haojian.zhuang@linaro.org>,
	"Vignesh R" <vigneshr@ti.com>,
	"Aaro Koskinen" <aaro.koskinen@iki.fi>,
	"Janusz Krzysztofik" <jmkrzyszt@gmail.com>,
	"Andi Shyti" <andi.shyti@kernel.org>,
	"Peter Rosin" <peda@axentia.se>, "Vinod Koul" <vkoul@kernel.org>,
	"Kishon Vijay Abraham I" <kishon@kernel.org>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Rob Herring" <robh@kernel.org>,
	"Bjorn Helgaas" <bhelgaas@google.com>
Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	 linux-arm-kernel@lists.infradead.org,
	linux-omap@vger.kernel.org,  linux-i2c@vger.kernel.org,
	linux-phy@lists.infradead.org,  linux-pci@vger.kernel.org,
	gregory.clement@bootlin.com,  theo.lebrun@bootlin.com,
	thomas.petazzoni@bootlin.com, u-kumar1@ti.com,
	 Thomas Richard <thomas.richard@bootlin.com>
Subject: [PATCH v3 17/18] PCI: j721e: add reset GPIO to struct j721e_pcie
Date: Thu, 15 Feb 2024 16:18:02 +0100	[thread overview]
Message-ID: <20240102-j7200-pcie-s2r-v3-17-5c2e4a3fac1f@bootlin.com> (raw)
In-Reply-To: <20240102-j7200-pcie-s2r-v3-0-5c2e4a3fac1f@bootlin.com>

From: Théo Lebrun <theo.lebrun@bootlin.com>

Add reset GPIO to struct j721e_pcie, so it can be used at suspend and
resume stages.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
---
 drivers/pci/controller/cadence/pci-j721e.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 2c87e7728a65..9c588e79f5ac 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -54,6 +54,7 @@ struct j721e_pcie {
 	struct clk		*refclk;
 	u32			mode;
 	u32			num_lanes;
+	struct gpio_desc	*reset_gpio;
 	void __iomem		*user_cfg_base;
 	void __iomem		*intd_cfg_base;
 	u32			linkdown_irq_regfield;
@@ -359,7 +360,6 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 	struct j721e_pcie *pcie;
 	struct cdns_pcie_rc *rc = NULL;
 	struct cdns_pcie_ep *ep = NULL;
-	struct gpio_desc *gpiod;
 	void __iomem *base;
 	struct clk *clk;
 	u32 num_lanes;
@@ -468,9 +468,9 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 
 	switch (mode) {
 	case PCI_MODE_RC:
-		gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
-		if (IS_ERR(gpiod)) {
-			ret = PTR_ERR(gpiod);
+		pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+		if (IS_ERR(pcie->reset_gpio)) {
+			ret = PTR_ERR(pcie->reset_gpio);
 			if (ret != -EPROBE_DEFER)
 				dev_err(dev, "Failed to get reset GPIO\n");
 			goto err_get_sync;
@@ -504,9 +504,9 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 		 * mode is selected while enabling the PHY. So deassert PERST#
 		 * after 100 us.
 		 */
-		if (gpiod) {
+		if (pcie->reset_gpio) {
 			usleep_range(100, 200);
-			gpiod_set_value_cansleep(gpiod, 1);
+			gpiod_set_value_cansleep(pcie->reset_gpio, 1);
 		}
 
 		ret = cdns_pcie_host_setup(rc);

-- 
2.39.2


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

WARNING: multiple messages have this Message-ID (diff)
From: Thomas Richard <thomas.richard@bootlin.com>
To: "Linus Walleij" <linus.walleij@linaro.org>,
	"Bartosz Golaszewski" <brgl@bgdev.pl>,
	"Andy Shevchenko" <andy@kernel.org>,
	"Tony Lindgren" <tony@atomide.com>,
	"Haojian Zhuang" <haojian.zhuang@linaro.org>,
	"Vignesh R" <vigneshr@ti.com>,
	"Aaro Koskinen" <aaro.koskinen@iki.fi>,
	"Janusz Krzysztofik" <jmkrzyszt@gmail.com>,
	"Andi Shyti" <andi.shyti@kernel.org>,
	"Peter Rosin" <peda@axentia.se>, "Vinod Koul" <vkoul@kernel.org>,
	"Kishon Vijay Abraham I" <kishon@kernel.org>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Rob Herring" <robh@kernel.org>,
	"Bjorn Helgaas" <bhelgaas@google.com>
Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	 linux-arm-kernel@lists.infradead.org,
	linux-omap@vger.kernel.org,  linux-i2c@vger.kernel.org,
	linux-phy@lists.infradead.org,  linux-pci@vger.kernel.org,
	gregory.clement@bootlin.com,  theo.lebrun@bootlin.com,
	thomas.petazzoni@bootlin.com, u-kumar1@ti.com,
	 Thomas Richard <thomas.richard@bootlin.com>
Subject: [PATCH v3 17/18] PCI: j721e: add reset GPIO to struct j721e_pcie
Date: Thu, 15 Feb 2024 16:18:02 +0100	[thread overview]
Message-ID: <20240102-j7200-pcie-s2r-v3-17-5c2e4a3fac1f@bootlin.com> (raw)
In-Reply-To: <20240102-j7200-pcie-s2r-v3-0-5c2e4a3fac1f@bootlin.com>

From: Théo Lebrun <theo.lebrun@bootlin.com>

Add reset GPIO to struct j721e_pcie, so it can be used at suspend and
resume stages.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
---
 drivers/pci/controller/cadence/pci-j721e.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 2c87e7728a65..9c588e79f5ac 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -54,6 +54,7 @@ struct j721e_pcie {
 	struct clk		*refclk;
 	u32			mode;
 	u32			num_lanes;
+	struct gpio_desc	*reset_gpio;
 	void __iomem		*user_cfg_base;
 	void __iomem		*intd_cfg_base;
 	u32			linkdown_irq_regfield;
@@ -359,7 +360,6 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 	struct j721e_pcie *pcie;
 	struct cdns_pcie_rc *rc = NULL;
 	struct cdns_pcie_ep *ep = NULL;
-	struct gpio_desc *gpiod;
 	void __iomem *base;
 	struct clk *clk;
 	u32 num_lanes;
@@ -468,9 +468,9 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 
 	switch (mode) {
 	case PCI_MODE_RC:
-		gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
-		if (IS_ERR(gpiod)) {
-			ret = PTR_ERR(gpiod);
+		pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+		if (IS_ERR(pcie->reset_gpio)) {
+			ret = PTR_ERR(pcie->reset_gpio);
 			if (ret != -EPROBE_DEFER)
 				dev_err(dev, "Failed to get reset GPIO\n");
 			goto err_get_sync;
@@ -504,9 +504,9 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 		 * mode is selected while enabling the PHY. So deassert PERST#
 		 * after 100 us.
 		 */
-		if (gpiod) {
+		if (pcie->reset_gpio) {
 			usleep_range(100, 200);
-			gpiod_set_value_cansleep(gpiod, 1);
+			gpiod_set_value_cansleep(pcie->reset_gpio, 1);
 		}
 
 		ret = cdns_pcie_host_setup(rc);

-- 
2.39.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2024-02-15 15:18 UTC|newest]

Thread overview: 162+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-15 15:17 [PATCH v3 00/18] Add suspend to ram support for PCIe on J7200 Thomas Richard
2024-02-15 15:17 ` Thomas Richard
2024-02-15 15:17 ` Thomas Richard
2024-02-15 15:17 ` [PATCH v3 01/18] gpio: pca953x: move suspend()/resume() to suspend_noirq()/resume_noirq() Thomas Richard
2024-02-15 15:17   ` Thomas Richard
2024-02-15 15:17   ` Thomas Richard
2024-02-21 21:54   ` Linus Walleij
2024-02-21 21:54     ` Linus Walleij
2024-02-21 21:54     ` Linus Walleij
2024-02-15 15:17 ` [PATCH v3 02/18] pinctrl: pinctrl-single: remove dead code in suspend() and resume() callbacks Thomas Richard
2024-02-15 15:17   ` Thomas Richard
2024-02-15 15:17   ` Thomas Richard
2024-02-15 15:27   ` Andy Shevchenko
2024-02-15 15:27     ` Andy Shevchenko
2024-02-15 15:27     ` Andy Shevchenko
2024-02-16  7:59     ` Thomas Richard
2024-02-16  7:59       ` Thomas Richard
2024-02-16  7:59       ` Thomas Richard
2024-02-16 15:08       ` Andy Shevchenko
2024-02-16 15:08         ` Andy Shevchenko
2024-02-16 15:08         ` Andy Shevchenko
2024-02-21 11:01         ` Thomas Richard
2024-02-21 11:01           ` Thomas Richard
2024-02-21 11:01           ` Thomas Richard
2024-02-21 13:13           ` Andy Shevchenko
2024-02-21 13:13             ` Andy Shevchenko
2024-02-21 13:13             ` Andy Shevchenko
2024-02-21 14:19             ` Thomas Richard
2024-02-21 14:19               ` Thomas Richard
2024-02-21 14:19               ` Thomas Richard
2024-02-15 15:17 ` [PATCH v3 03/18] pinctrl: pinctrl-single: move suspend()/resume() callbacks to noirq Thomas Richard
2024-02-15 15:17   ` Thomas Richard
2024-02-15 15:17   ` Thomas Richard
2024-02-15 15:17 ` [PATCH v3 04/18] i2c: omap: wakeup the controller during suspend() callback Thomas Richard
2024-02-15 15:17   ` Thomas Richard
2024-02-15 15:17   ` Thomas Richard
2024-02-15 15:30   ` Andy Shevchenko
2024-02-15 15:30     ` Andy Shevchenko
2024-02-15 15:30     ` Andy Shevchenko
2024-02-15 15:17 ` [PATCH v3 05/18] mux: add mux_chip_resume() function Thomas Richard
2024-02-15 15:17   ` Thomas Richard
2024-02-15 15:17   ` Thomas Richard
2024-02-15 15:29   ` Andy Shevchenko
2024-02-15 15:29     ` Andy Shevchenko
2024-02-15 15:29     ` Andy Shevchenko
2024-02-16  7:52     ` Thomas Richard
2024-02-16  7:52       ` Thomas Richard
2024-02-16  7:52       ` Thomas Richard
2024-02-16 15:07       ` Andy Shevchenko
2024-02-16 15:07         ` Andy Shevchenko
2024-02-16 15:07         ` Andy Shevchenko
2024-02-21 10:59         ` Thomas Richard
2024-02-21 10:59           ` Thomas Richard
2024-02-21 10:59           ` Thomas Richard
2024-02-15 15:17 ` [PATCH v3 06/18] mux: mmio: add resume support Thomas Richard
2024-02-15 15:17   ` Thomas Richard
2024-02-15 15:17   ` Thomas Richard
2024-02-15 15:17 ` [PATCH v3 07/18] phy: ti: phy-j721e-wiz: use dev_err_probe() instead of dev_err() Thomas Richard
2024-02-15 15:17   ` Thomas Richard
2024-02-15 15:17   ` Thomas Richard
2024-02-15 15:33   ` Andy Shevchenko
2024-02-15 15:33     ` Andy Shevchenko
2024-02-15 15:33     ` Andy Shevchenko
2024-02-15 15:17 ` [PATCH v3 08/18] phy: ti: phy-j721e-wiz: split wiz_clock_init() function Thomas Richard
2024-02-15 15:17   ` Thomas Richard
2024-02-15 15:17   ` Thomas Richard
2024-02-15 15:43   ` Andy Shevchenko
2024-02-15 15:43     ` Andy Shevchenko
2024-02-15 15:43     ` Andy Shevchenko
2024-02-16  6:02     ` Vinod Koul
2024-02-16  6:02       ` Vinod Koul
2024-02-16  6:02       ` Vinod Koul
2024-02-16  9:04       ` Siddharth Vadapalli
2024-02-16  9:04         ` Siddharth Vadapalli
2024-02-16  9:04         ` Siddharth Vadapalli
2024-02-16 15:03         ` Andy Shevchenko
2024-02-16 15:03           ` Andy Shevchenko
2024-02-16 15:03           ` Andy Shevchenko
2024-02-16 14:56       ` Andy Shevchenko
2024-02-16 14:56         ` Andy Shevchenko
2024-02-16 14:56         ` Andy Shevchenko
2024-02-15 15:17 ` [PATCH v3 09/18] phy: ti: phy-j721e-wiz: add resume support Thomas Richard
2024-02-15 15:17   ` Thomas Richard
2024-02-15 15:17   ` Thomas Richard
2024-02-15 15:17 ` [PATCH v3 10/18] phy: cadence-torrent: extract calls to clk_get from cdns_torrent_clk Thomas Richard
2024-02-15 15:17   ` Thomas Richard
2024-02-15 15:17   ` Thomas Richard
2024-02-15 15:17 ` [PATCH v3 11/18] phy: cadence-torrent: register resets even if the phy is already configured Thomas Richard
2024-02-15 15:17   ` Thomas Richard
2024-02-15 15:17   ` Thomas Richard
2024-02-15 15:17 ` [PATCH v3 12/18] phy: cadence-torrent: add already_configured to struct cdns_torrent_phy Thomas Richard
2024-02-15 15:17   ` Thomas Richard
2024-02-15 15:17   ` Thomas Richard
2024-02-15 15:17 ` [PATCH v3 13/18] phy: cadence-torrent: remove noop_ops phy operations Thomas Richard
2024-02-15 15:17   ` Thomas Richard
2024-02-15 15:17   ` Thomas Richard
2024-02-15 15:45   ` Andy Shevchenko
2024-02-15 15:45     ` Andy Shevchenko
2024-02-15 15:45     ` Andy Shevchenko
2024-02-15 15:17 ` [PATCH v3 14/18] phy: cadence-torrent: add suspend and resume support Thomas Richard
2024-02-15 15:17   ` Thomas Richard
2024-02-15 15:17   ` Thomas Richard
2024-02-15 15:46   ` Andy Shevchenko
2024-02-15 15:46     ` Andy Shevchenko
2024-02-15 15:46     ` Andy Shevchenko
2024-02-16  7:36     ` Thomas Richard
2024-02-16  7:36       ` Thomas Richard
2024-02-16  7:36       ` Thomas Richard
2024-02-21 13:09   ` Philipp Zabel
2024-02-21 13:09     ` Philipp Zabel
2024-02-21 13:09     ` Philipp Zabel
2024-02-21 13:41     ` Thomas Richard
2024-02-21 13:41       ` Thomas Richard
2024-02-21 13:41       ` Thomas Richard
2024-02-21 13:58       ` Philipp Zabel
2024-02-21 13:58         ` Philipp Zabel
2024-02-21 13:58         ` Philipp Zabel
2024-02-15 15:18 ` [PATCH v3 15/18] PCI: cadence: extract link setup sequence from cdns_pcie_host_setup() Thomas Richard
2024-02-15 15:18   ` Thomas Richard
2024-02-15 15:18   ` Thomas Richard
2024-02-16  9:34   ` Siddharth Vadapalli
2024-02-16  9:34     ` Siddharth Vadapalli
2024-02-16  9:34     ` Siddharth Vadapalli
2024-02-15 15:18 ` [PATCH v3 16/18] PCI: cadence: set cdns_pcie_host_init() global Thomas Richard
2024-02-15 15:18   ` Thomas Richard
2024-02-15 15:18   ` Thomas Richard
2024-02-16  9:38   ` Siddharth Vadapalli
2024-02-16  9:38     ` Siddharth Vadapalli
2024-02-16  9:38     ` Siddharth Vadapalli
2024-02-15 15:18 ` Thomas Richard [this message]
2024-02-15 15:18   ` [PATCH v3 17/18] PCI: j721e: add reset GPIO to struct j721e_pcie Thomas Richard
2024-02-15 15:18   ` Thomas Richard
2024-02-15 16:04   ` Andy Shevchenko
2024-02-15 16:04     ` Andy Shevchenko
2024-02-15 16:04     ` Andy Shevchenko
2024-02-26 17:05     ` Thomas Richard
2024-02-26 17:05       ` Thomas Richard
2024-02-26 17:05       ` Thomas Richard
2024-02-26 17:54       ` Andy Shevchenko
2024-02-26 17:54         ` Andy Shevchenko
2024-02-26 17:54         ` Andy Shevchenko
2024-02-15 15:18 ` [PATCH v3 18/18] PCI: j721e: add suspend and resume support Thomas Richard
2024-02-15 15:18   ` Thomas Richard
2024-02-15 15:18   ` Thomas Richard
2024-02-15 15:51   ` Andy Shevchenko
2024-02-15 15:51     ` Andy Shevchenko
2024-02-15 15:51     ` Andy Shevchenko
2024-02-16 10:48   ` Siddharth Vadapalli
2024-02-16 10:48     ` Siddharth Vadapalli
2024-02-16 10:48     ` Siddharth Vadapalli
2024-02-16 11:09     ` Théo Lebrun
2024-02-16 11:09       ` Théo Lebrun
2024-02-16 11:09       ` Théo Lebrun
2024-02-16 11:16       ` Siddharth Vadapalli
2024-02-16 11:16         ` Siddharth Vadapalli
2024-02-16 11:16         ` Siddharth Vadapalli
2024-02-15 15:40 ` [PATCH v3 00/18] Add suspend to ram support for PCIe on J7200 Philipp Stanner
2024-02-15 15:40   ` Philipp Stanner
2024-02-15 15:40   ` Philipp Stanner
2024-02-15 17:06 ` Bjorn Helgaas
2024-02-15 17:06   ` Bjorn Helgaas
2024-02-15 17:06   ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240102-j7200-pcie-s2r-v3-17-5c2e4a3fac1f@bootlin.com \
    --to=thomas.richard@bootlin.com \
    --cc=aaro.koskinen@iki.fi \
    --cc=andi.shyti@kernel.org \
    --cc=andy@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=brgl@bgdev.pl \
    --cc=gregory.clement@bootlin.com \
    --cc=haojian.zhuang@linaro.org \
    --cc=jmkrzyszt@gmail.com \
    --cc=kishon@kernel.org \
    --cc=kw@linux.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=lpieralisi@kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=peda@axentia.se \
    --cc=robh@kernel.org \
    --cc=theo.lebrun@bootlin.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=tony@atomide.com \
    --cc=u-kumar1@ti.com \
    --cc=vigneshr@ti.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.