From: Gatien Chevallier <gatien.chevallier@foss.st.com>
To: <Oleksii_Moisieiev@epam.com>, <gregkh@linuxfoundation.org>,
<herbert@gondor.apana.org.au>, <davem@davemloft.net>,
<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
<conor+dt@kernel.org>, <alexandre.torgue@foss.st.com>,
<vkoul@kernel.org>, <jic23@kernel.org>,
<olivier.moysan@foss.st.com>, <arnaud.pouliquen@foss.st.com>,
<mchehab@kernel.org>, <fabrice.gasnier@foss.st.com>,
<andi.shyti@kernel.org>, <ulf.hansson@linaro.org>,
<edumazet@google.com>, <kuba@kernel.org>, <pabeni@redhat.com>,
<hugues.fruchet@foss.st.com>, <lee@kernel.org>, <will@kernel.org>,
<catalin.marinas@arm.com>, <arnd@kernel.org>,
<richardcochran@gmail.com>, Frank Rowand <frowand.list@gmail.com>,
<peng.fan@oss.nxp.com>, <lars@metafoo.de>, <rcsekar@samsung.com>,
<wg@grandegger.com>, <mkl@pengutronix.de>
Cc: <linux-crypto@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <dmaengine@vger.kernel.org>,
<linux-i2c@vger.kernel.org>, <linux-iio@vger.kernel.org>,
<alsa-devel@alsa-project.org>, <linux-media@vger.kernel.org>,
<linux-mmc@vger.kernel.org>, <netdev@vger.kernel.org>,
<linux-phy@lists.infradead.org>, <linux-serial@vger.kernel.org>,
<linux-spi@vger.kernel.org>, <linux-usb@vger.kernel.org>,
Gatien Chevallier <gatien.chevallier@foss.st.com>
Subject: [PATCH v9 12/13] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
Date: Fri, 5 Jan 2024 14:04:03 +0100 [thread overview]
Message-ID: <20240105130404.301172-13-gatien.chevallier@foss.st.com> (raw)
In-Reply-To: <20240105130404.301172-1-gatien.chevallier@foss.st.com>
ETZPC is a firewall controller. Put all peripherals filtered by the
ETZPC as ETZPC subnodes and keep the "simple-bus" compatible for
backward compatibility.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
---
Changes in V7:
- Keep simple-bus compatible
- Remove access-controllers reference in this patch
Changes in V6:
- Renamed access-controller to access-controllers
- Removal of access-control-provider property
Changes in V5:
- Renamed feature-domain* to access-control*
arch/arm/boot/dts/st/stm32mp131.dtsi | 1037 +++++++++++++------------
arch/arm/boot/dts/st/stm32mp133.dtsi | 50 +-
arch/arm/boot/dts/st/stm32mp13xc.dtsi | 18 +-
arch/arm/boot/dts/st/stm32mp13xf.dtsi | 18 +-
4 files changed, 564 insertions(+), 559 deletions(-)
diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi
index b04d24c939c3..6ba8e3fd43b0 100644
--- a/arch/arm/boot/dts/st/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp131.dtsi
@@ -745,340 +745,6 @@ dmamux1: dma-router@48002000 {
dma-channels = <16>;
};
- adc_2: adc@48004000 {
- compatible = "st,stm32mp13-adc-core";
- reg = <0x48004000 0x400>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc ADC2>, <&rcc ADC2_K>;
- clock-names = "bus", "adc";
- interrupt-controller;
- #interrupt-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- adc2: adc@0 {
- compatible = "st,stm32mp13-adc";
- #io-channel-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0>;
- interrupt-parent = <&adc_2>;
- interrupts = <0>;
- dmas = <&dmamux1 10 0x400 0x80000001>;
- dma-names = "rx";
- status = "disabled";
-
- channel@13 {
- reg = <13>;
- label = "vrefint";
- };
- channel@14 {
- reg = <14>;
- label = "vddcore";
- };
- channel@16 {
- reg = <16>;
- label = "vddcpu";
- };
- channel@17 {
- reg = <17>;
- label = "vddq_ddr";
- };
- };
- };
-
- usbotg_hs: usb@49000000 {
- compatible = "st,stm32mp15-hsotg", "snps,dwc2";
- reg = <0x49000000 0x40000>;
- clocks = <&rcc USBO_K>;
- clock-names = "otg";
- resets = <&rcc USBO_R>;
- reset-names = "dwc2";
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- g-rx-fifo-size = <512>;
- g-np-tx-fifo-size = <32>;
- g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
- dr_mode = "otg";
- otg-rev = <0x200>;
- usb33d-supply = <&scmi_usb33>;
- status = "disabled";
- };
-
- usart1: serial@4c000000 {
- compatible = "st,stm32h7-uart";
- reg = <0x4c000000 0x400>;
- interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc USART1_K>;
- resets = <&rcc USART1_R>;
- wakeup-source;
- dmas = <&dmamux1 41 0x400 0x5>,
- <&dmamux1 42 0x400 0x1>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- usart2: serial@4c001000 {
- compatible = "st,stm32h7-uart";
- reg = <0x4c001000 0x400>;
- interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc USART2_K>;
- resets = <&rcc USART2_R>;
- wakeup-source;
- dmas = <&dmamux1 43 0x400 0x5>,
- <&dmamux1 44 0x400 0x1>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- i2s4: audio-controller@4c002000 {
- compatible = "st,stm32h7-i2s";
- reg = <0x4c002000 0x400>;
- #sound-dai-cells = <0>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmamux1 83 0x400 0x01>,
- <&dmamux1 84 0x400 0x01>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- spi4: spi@4c002000 {
- compatible = "st,stm32h7-spi";
- reg = <0x4c002000 0x400>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SPI4_K>;
- resets = <&rcc SPI4_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- dmas = <&dmamux1 83 0x400 0x01>,
- <&dmamux1 84 0x400 0x01>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- spi5: spi@4c003000 {
- compatible = "st,stm32h7-spi";
- reg = <0x4c003000 0x400>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SPI5_K>;
- resets = <&rcc SPI5_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- dmas = <&dmamux1 85 0x400 0x01>,
- <&dmamux1 86 0x400 0x01>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- i2c3: i2c@4c004000 {
- compatible = "st,stm32mp13-i2c";
- reg = <0x4c004000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C3_K>;
- resets = <&rcc I2C3_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- dmas = <&dmamux1 73 0x400 0x1>,
- <&dmamux1 74 0x400 0x1>;
- dma-names = "rx", "tx";
- st,syscfg-fmp = <&syscfg 0x4 0x4>;
- i2c-analog-filter;
- status = "disabled";
- };
-
- i2c4: i2c@4c005000 {
- compatible = "st,stm32mp13-i2c";
- reg = <0x4c005000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C4_K>;
- resets = <&rcc I2C4_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- dmas = <&dmamux1 75 0x400 0x1>,
- <&dmamux1 76 0x400 0x1>;
- dma-names = "rx", "tx";
- st,syscfg-fmp = <&syscfg 0x4 0x8>;
- i2c-analog-filter;
- status = "disabled";
- };
-
- i2c5: i2c@4c006000 {
- compatible = "st,stm32mp13-i2c";
- reg = <0x4c006000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C5_K>;
- resets = <&rcc I2C5_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- dmas = <&dmamux1 115 0x400 0x1>,
- <&dmamux1 116 0x400 0x1>;
- dma-names = "rx", "tx";
- st,syscfg-fmp = <&syscfg 0x4 0x10>;
- i2c-analog-filter;
- status = "disabled";
- };
-
- timers12: timer@4c007000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c007000 0x400>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM12_K>;
- clock-names = "int";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@11 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <11>;
- status = "disabled";
- };
- };
-
- timers13: timer@4c008000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c008000 0x400>;
- interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM13_K>;
- clock-names = "int";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@12 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <12>;
- status = "disabled";
- };
- };
-
- timers14: timer@4c009000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c009000 0x400>;
- interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM14_K>;
- clock-names = "int";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@13 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <13>;
- status = "disabled";
- };
- };
-
- timers15: timer@4c00a000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c00a000 0x400>;
- interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM15_K>;
- clock-names = "int";
- dmas = <&dmamux1 105 0x400 0x1>,
- <&dmamux1 106 0x400 0x1>,
- <&dmamux1 107 0x400 0x1>,
- <&dmamux1 108 0x400 0x1>;
- dma-names = "ch1", "up", "trig", "com";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@14 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <14>;
- status = "disabled";
- };
- };
-
- timers16: timer@4c00b000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c00b000 0x400>;
- interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM16_K>;
- clock-names = "int";
- dmas = <&dmamux1 109 0x400 0x1>,
- <&dmamux1 110 0x400 0x1>;
- dma-names = "ch1", "up";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@15 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <15>;
- status = "disabled";
- };
- };
-
- timers17: timer@4c00c000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c00c000 0x400>;
- interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM17_K>;
- clock-names = "int";
- dmas = <&dmamux1 111 0x400 0x1>,
- <&dmamux1 112 0x400 0x1>;
- dma-names = "ch1", "up";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@16 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <16>;
- status = "disabled";
- };
- };
-
rcc: rcc@50000000 {
compatible = "st,stm32mp13-rcc", "syscon";
reg = <0x50000000 0x1000>;
@@ -1105,69 +771,6 @@ syscfg: syscon@50020000 {
clocks = <&rcc SYSCFG>;
};
- lptimer2: timer@50021000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-lptimer";
- reg = <0x50021000 0x400>;
- interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc LPTIM2_K>;
- clock-names = "mux";
- wakeup-source;
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm-lp";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- trigger@1 {
- compatible = "st,stm32-lptimer-trigger";
- reg = <1>;
- status = "disabled";
- };
-
- counter {
- compatible = "st,stm32-lptimer-counter";
- status = "disabled";
- };
-
- timer {
- compatible = "st,stm32-lptimer-timer";
- status = "disabled";
- };
- };
-
- lptimer3: timer@50022000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-lptimer";
- reg = <0x50022000 0x400>;
- interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc LPTIM3_K>;
- clock-names = "mux";
- wakeup-source;
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm-lp";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- trigger@2 {
- compatible = "st,stm32-lptimer-trigger";
- reg = <2>;
- status = "disabled";
- };
-
- timer {
- compatible = "st,stm32-lptimer-timer";
- status = "disabled";
- };
- };
-
lptimer4: timer@50023000 {
compatible = "st,stm32-lptimer";
reg = <0x50023000 0x400>;
@@ -1210,25 +813,6 @@ timer {
};
};
- hash: hash@54003000 {
- compatible = "st,stm32mp13-hash";
- reg = <0x54003000 0x400>;
- interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc HASH1>;
- resets = <&rcc HASH1_R>;
- dmas = <&mdma 30 0x2 0x1000a02 0x0 0x0>;
- dma-names = "in";
- status = "disabled";
- };
-
- rng: rng@54004000 {
- compatible = "st,stm32mp13-rng";
- reg = <0x54004000 0x400>;
- clocks = <&rcc RNG1_K>;
- resets = <&rcc RNG1_R>;
- status = "disabled";
- };
-
mdma: dma-controller@58000000 {
compatible = "st,stm32h7-mdma";
reg = <0x58000000 0x1000>;
@@ -1239,82 +823,6 @@ mdma: dma-controller@58000000 {
dma-requests = <48>;
};
- fmc: memory-controller@58002000 {
- compatible = "st,stm32mp1-fmc2-ebi";
- reg = <0x58002000 0x1000>;
- ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
- <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
- <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
- <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
- <4 0 0x80000000 0x10000000>; /* NAND */
- #address-cells = <2>;
- #size-cells = <1>;
- clocks = <&rcc FMC_K>;
- resets = <&rcc FMC_R>;
- status = "disabled";
-
- nand-controller@4,0 {
- compatible = "st,stm32mp1-fmc2-nfc";
- reg = <4 0x00000000 0x1000>,
- <4 0x08010000 0x1000>,
- <4 0x08020000 0x1000>,
- <4 0x01000000 0x1000>,
- <4 0x09010000 0x1000>,
- <4 0x09020000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&mdma 24 0x2 0x12000a02 0x0 0x0>,
- <&mdma 24 0x2 0x12000a08 0x0 0x0>,
- <&mdma 25 0x2 0x12000a0a 0x0 0x0>;
- dma-names = "tx", "rx", "ecc";
- status = "disabled";
- };
- };
-
- qspi: spi@58003000 {
- compatible = "st,stm32f469-qspi";
- reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
- reg-names = "qspi", "qspi_mm";
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&mdma 26 0x2 0x10100002 0x0 0x0>,
- <&mdma 26 0x2 0x10100008 0x0 0x0>;
- dma-names = "tx", "rx";
- clocks = <&rcc QSPI_K>;
- resets = <&rcc QSPI_R>;
- status = "disabled";
- };
-
- sdmmc1: mmc@58005000 {
- compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
- arm,primecell-periphid = <0x20253180>;
- reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SDMMC1_K>;
- clock-names = "apb_pclk";
- resets = <&rcc SDMMC1_R>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- max-frequency = <130000000>;
- status = "disabled";
- };
-
- sdmmc2: mmc@58007000 {
- compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
- arm,primecell-periphid = <0x20253180>;
- reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SDMMC2_K>;
- clock-names = "apb_pclk";
- resets = <&rcc SDMMC2_R>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- max-frequency = <130000000>;
- status = "disabled";
- };
-
usbh_ohci: usb@5800c000 {
compatible = "generic-ohci";
reg = <0x5800c000 0x1000>;
@@ -1342,29 +850,6 @@ iwdg2: watchdog@5a002000 {
status = "disabled";
};
- usbphyc: usbphyc@5a006000 {
- #address-cells = <1>;
- #size-cells = <0>;
- #clock-cells = <0>;
- compatible = "st,stm32mp1-usbphyc";
- reg = <0x5a006000 0x1000>;
- clocks = <&rcc USBPHY_K>;
- resets = <&rcc USBPHY_R>;
- vdda1v1-supply = <&scmi_reg11>;
- vdda1v8-supply = <&scmi_reg18>;
- status = "disabled";
-
- usbphyc_port0: usb-phy@0 {
- #phy-cells = <0>;
- reg = <0>;
- };
-
- usbphyc_port1: usb-phy@1 {
- #phy-cells = <1>;
- reg = <1>;
- };
- };
-
rtc: rtc@5c004000 {
compatible = "st,stm32mp1-rtc";
reg = <0x5c004000 0x400>;
@@ -1393,6 +878,527 @@ ts_cal2: calib@5e {
};
};
+ etzpc: bus@5c007000 {
+ compatible = "st,stm32-etzpc", "simple-bus";
+ reg = <0x5c007000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ adc_2: adc@48004000 {
+ compatible = "st,stm32mp13-adc-core";
+ reg = <0x48004000 0x400>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc ADC2>, <&rcc ADC2_K>;
+ clock-names = "bus", "adc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ adc2: adc@0 {
+ compatible = "st,stm32mp13-adc";
+ #io-channel-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+ interrupt-parent = <&adc_2>;
+ interrupts = <0>;
+ dmas = <&dmamux1 10 0x400 0x80000001>;
+ dma-names = "rx";
+ status = "disabled";
+
+ channel@13 {
+ reg = <13>;
+ label = "vrefint";
+ };
+ channel@14 {
+ reg = <14>;
+ label = "vddcore";
+ };
+ channel@16 {
+ reg = <16>;
+ label = "vddcpu";
+ };
+ channel@17 {
+ reg = <17>;
+ label = "vddq_ddr";
+ };
+ };
+ };
+
+ usbotg_hs: usb@49000000 {
+ compatible = "st,stm32mp15-hsotg", "snps,dwc2";
+ reg = <0x49000000 0x40000>;
+ clocks = <&rcc USBO_K>;
+ clock-names = "otg";
+ resets = <&rcc USBO_R>;
+ reset-names = "dwc2";
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ g-rx-fifo-size = <512>;
+ g-np-tx-fifo-size = <32>;
+ g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
+ dr_mode = "otg";
+ otg-rev = <0x200>;
+ usb33d-supply = <&scmi_usb33>;
+ status = "disabled";
+ };
+
+ usart1: serial@4c000000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4c000000 0x400>;
+ interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART1_K>;
+ resets = <&rcc USART1_R>;
+ wakeup-source;
+ dmas = <&dmamux1 41 0x400 0x5>,
+ <&dmamux1 42 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ usart2: serial@4c001000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4c001000 0x400>;
+ interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART2_K>;
+ resets = <&rcc USART2_R>;
+ wakeup-source;
+ dmas = <&dmamux1 43 0x400 0x5>,
+ <&dmamux1 44 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2s4: audio-controller@4c002000 {
+ compatible = "st,stm32h7-i2s";
+ reg = <0x4c002000 0x400>;
+ #sound-dai-cells = <0>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 83 0x400 0x01>,
+ <&dmamux1 84 0x400 0x01>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ spi4: spi@4c002000 {
+ compatible = "st,stm32h7-spi";
+ reg = <0x4c002000 0x400>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI4_K>;
+ resets = <&rcc SPI4_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmamux1 83 0x400 0x01>,
+ <&dmamux1 84 0x400 0x01>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ spi5: spi@4c003000 {
+ compatible = "st,stm32h7-spi";
+ reg = <0x4c003000 0x400>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI5_K>;
+ resets = <&rcc SPI5_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmamux1 85 0x400 0x01>,
+ <&dmamux1 86 0x400 0x01>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2c3: i2c@4c004000 {
+ compatible = "st,stm32mp13-i2c";
+ reg = <0x4c004000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C3_K>;
+ resets = <&rcc I2C3_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmamux1 73 0x400 0x1>,
+ <&dmamux1 74 0x400 0x1>;
+ dma-names = "rx", "tx";
+ st,syscfg-fmp = <&syscfg 0x4 0x4>;
+ i2c-analog-filter;
+ status = "disabled";
+ };
+
+ i2c4: i2c@4c005000 {
+ compatible = "st,stm32mp13-i2c";
+ reg = <0x4c005000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C4_K>;
+ resets = <&rcc I2C4_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmamux1 75 0x400 0x1>,
+ <&dmamux1 76 0x400 0x1>;
+ dma-names = "rx", "tx";
+ st,syscfg-fmp = <&syscfg 0x4 0x8>;
+ i2c-analog-filter;
+ status = "disabled";
+ };
+
+ i2c5: i2c@4c006000 {
+ compatible = "st,stm32mp13-i2c";
+ reg = <0x4c006000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C5_K>;
+ resets = <&rcc I2C5_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmamux1 115 0x400 0x1>,
+ <&dmamux1 116 0x400 0x1>;
+ dma-names = "rx", "tx";
+ st,syscfg-fmp = <&syscfg 0x4 0x10>;
+ i2c-analog-filter;
+ status = "disabled";
+ };
+
+ timers12: timer@4c007000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c007000 0x400>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM12_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@11 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <11>;
+ status = "disabled";
+ };
+ };
+
+ timers13: timer@4c008000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c008000 0x400>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM13_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@12 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <12>;
+ status = "disabled";
+ };
+ };
+
+ timers14: timer@4c009000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c009000 0x400>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM14_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@13 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <13>;
+ status = "disabled";
+ };
+ };
+
+ timers15: timer@4c00a000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c00a000 0x400>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM15_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 105 0x400 0x1>,
+ <&dmamux1 106 0x400 0x1>,
+ <&dmamux1 107 0x400 0x1>,
+ <&dmamux1 108 0x400 0x1>;
+ dma-names = "ch1", "up", "trig", "com";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@14 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <14>;
+ status = "disabled";
+ };
+ };
+
+ timers16: timer@4c00b000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c00b000 0x400>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM16_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 109 0x400 0x1>,
+ <&dmamux1 110 0x400 0x1>;
+ dma-names = "ch1", "up";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@15 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <15>;
+ status = "disabled";
+ };
+ };
+
+ timers17: timer@4c00c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c00c000 0x400>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM17_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 111 0x400 0x1>,
+ <&dmamux1 112 0x400 0x1>;
+ dma-names = "ch1", "up";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@16 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <16>;
+ status = "disabled";
+ };
+ };
+
+ lptimer2: timer@50021000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x50021000 0x400>;
+ interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc LPTIM2_K>;
+ clock-names = "mux";
+ wakeup-source;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ trigger@1 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <1>;
+ status = "disabled";
+ };
+
+ counter {
+ compatible = "st,stm32-lptimer-counter";
+ status = "disabled";
+ };
+
+ timer {
+ compatible = "st,stm32-lptimer-timer";
+ status = "disabled";
+ };
+ };
+
+ lptimer3: timer@50022000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x50022000 0x400>;
+ interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc LPTIM3_K>;
+ clock-names = "mux";
+ wakeup-source;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ trigger@2 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <2>;
+ status = "disabled";
+ };
+
+ timer {
+ compatible = "st,stm32-lptimer-timer";
+ status = "disabled";
+ };
+ };
+
+ hash: hash@54003000 {
+ compatible = "st,stm32mp13-hash";
+ reg = <0x54003000 0x400>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc HASH1>;
+ resets = <&rcc HASH1_R>;
+ dmas = <&mdma 30 0x2 0x1000a02 0x0 0x0>;
+ dma-names = "in";
+ };
+
+ rng: rng@54004000 {
+ compatible = "st,stm32mp13-rng";
+ reg = <0x54004000 0x400>;
+ clocks = <&rcc RNG1_K>;
+ resets = <&rcc RNG1_R>;
+ };
+
+ fmc: memory-controller@58002000 {
+ compatible = "st,stm32mp1-fmc2-ebi";
+ reg = <0x58002000 0x1000>;
+ ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
+ <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
+ <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
+ <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
+ <4 0 0x80000000 0x10000000>; /* NAND */
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clocks = <&rcc FMC_K>;
+ resets = <&rcc FMC_R>;
+ status = "disabled";
+
+ nand-controller@4,0 {
+ compatible = "st,stm32mp1-fmc2-nfc";
+ reg = <4 0x00000000 0x1000>,
+ <4 0x08010000 0x1000>,
+ <4 0x08020000 0x1000>,
+ <4 0x01000000 0x1000>,
+ <4 0x09010000 0x1000>,
+ <4 0x09020000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdma 24 0x2 0x12000a02 0x0 0x0>,
+ <&mdma 24 0x2 0x12000a08 0x0 0x0>,
+ <&mdma 25 0x2 0x12000a0a 0x0 0x0>;
+ dma-names = "tx", "rx", "ecc";
+ status = "disabled";
+ };
+ };
+
+ qspi: spi@58003000 {
+ compatible = "st,stm32f469-qspi";
+ reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+ reg-names = "qspi", "qspi_mm";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdma 26 0x2 0x10100002 0x0 0x0>,
+ <&mdma 26 0x2 0x10100008 0x0 0x0>;
+ dma-names = "tx", "rx";
+ clocks = <&rcc QSPI_K>;
+ resets = <&rcc QSPI_R>;
+ status = "disabled";
+ };
+
+ sdmmc1: mmc@58005000 {
+ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x20253180>;
+ reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SDMMC1_K>;
+ clock-names = "apb_pclk";
+ resets = <&rcc SDMMC1_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <130000000>;
+ status = "disabled";
+ };
+
+ sdmmc2: mmc@58007000 {
+ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x20253180>;
+ reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SDMMC2_K>;
+ clock-names = "apb_pclk";
+ resets = <&rcc SDMMC2_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <130000000>;
+ status = "disabled";
+ };
+
+ usbphyc: usbphyc@5a006000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <0>;
+ compatible = "st,stm32mp1-usbphyc";
+ reg = <0x5a006000 0x1000>;
+ clocks = <&rcc USBPHY_K>;
+ resets = <&rcc USBPHY_R>;
+ vdda1v1-supply = <&scmi_reg11>;
+ vdda1v8-supply = <&scmi_reg18>;
+ status = "disabled";
+
+ usbphyc_port0: usb-phy@0 {
+ #phy-cells = <0>;
+ reg = <0>;
+ };
+
+ usbphyc_port1: usb-phy@1 {
+ #phy-cells = <1>;
+ reg = <1>;
+ };
+ };
+ };
+
/*
* Break node order to solve dependency probe issue between
* pinctrl and exti.
@@ -1404,6 +1410,7 @@ pinctrl: pinctrl@50002000 {
ranges = <0 0x50002000 0x8400>;
interrupt-parent = <&exti>;
st,syscfg = <&exti 0x60 0xff>;
+ pins-are-numbered;
gpioa: gpio@50002000 {
gpio-controller;
diff --git a/arch/arm/boot/dts/st/stm32mp133.dtsi b/arch/arm/boot/dts/st/stm32mp133.dtsi
index df451c3c2a26..c4d3a520c14b 100644
--- a/arch/arm/boot/dts/st/stm32mp133.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp133.dtsi
@@ -33,35 +33,37 @@ m_can2: can@4400f000 {
bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
status = "disabled";
};
+ };
+};
- adc_1: adc@48003000 {
- compatible = "st,stm32mp13-adc-core";
- reg = <0x48003000 0x400>;
- interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc ADC1>, <&rcc ADC1_K>;
- clock-names = "bus", "adc";
- interrupt-controller;
- #interrupt-cells = <1>;
+&etzpc {
+ adc_1: adc@48003000 {
+ compatible = "st,stm32mp13-adc-core";
+ reg = <0x48003000 0x400>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc ADC1>, <&rcc ADC1_K>;
+ clock-names = "bus", "adc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ adc1: adc@0 {
+ compatible = "st,stm32mp13-adc";
+ #io-channel-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
+ reg = <0x0>;
+ interrupt-parent = <&adc_1>;
+ interrupts = <0>;
+ dmas = <&dmamux1 9 0x400 0x80000001>;
+ dma-names = "rx";
status = "disabled";
- adc1: adc@0 {
- compatible = "st,stm32mp13-adc";
- #io-channel-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0>;
- interrupt-parent = <&adc_1>;
- interrupts = <0>;
- dmas = <&dmamux1 9 0x400 0x80000001>;
- dma-names = "rx";
- status = "disabled";
-
- channel@18 {
- reg = <18>;
- label = "vrefint";
- };
+ channel@18 {
+ reg = <18>;
+ label = "vrefint";
};
};
};
diff --git a/arch/arm/boot/dts/st/stm32mp13xc.dtsi b/arch/arm/boot/dts/st/stm32mp13xc.dtsi
index 4d00e7592882..b9fb071a1471 100644
--- a/arch/arm/boot/dts/st/stm32mp13xc.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp13xc.dtsi
@@ -4,15 +4,13 @@
* Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
*/
-/ {
- soc {
- cryp: crypto@54002000 {
- compatible = "st,stm32mp1-cryp";
- reg = <0x54002000 0x400>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc CRYP1>;
- resets = <&rcc CRYP1_R>;
- status = "disabled";
- };
+&etzpc {
+ cryp: crypto@54002000 {
+ compatible = "st,stm32mp1-cryp";
+ reg = <0x54002000 0x400>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CRYP1>;
+ resets = <&rcc CRYP1_R>;
+ status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/st/stm32mp13xf.dtsi b/arch/arm/boot/dts/st/stm32mp13xf.dtsi
index 4d00e7592882..b9fb071a1471 100644
--- a/arch/arm/boot/dts/st/stm32mp13xf.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp13xf.dtsi
@@ -4,15 +4,13 @@
* Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
*/
-/ {
- soc {
- cryp: crypto@54002000 {
- compatible = "st,stm32mp1-cryp";
- reg = <0x54002000 0x400>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc CRYP1>;
- resets = <&rcc CRYP1_R>;
- status = "disabled";
- };
+&etzpc {
+ cryp: crypto@54002000 {
+ compatible = "st,stm32mp1-cryp";
+ reg = <0x54002000 0x400>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CRYP1>;
+ resets = <&rcc CRYP1_R>;
+ status = "disabled";
};
};
--
2.35.3
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
WARNING: multiple messages have this Message-ID (diff)
From: Gatien Chevallier <gatien.chevallier@foss.st.com>
To: <Oleksii_Moisieiev@epam.com>, <gregkh@linuxfoundation.org>,
<herbert@gondor.apana.org.au>, <davem@davemloft.net>,
<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
<conor+dt@kernel.org>, <alexandre.torgue@foss.st.com>,
<vkoul@kernel.org>, <jic23@kernel.org>,
<olivier.moysan@foss.st.com>, <arnaud.pouliquen@foss.st.com>,
<mchehab@kernel.org>, <fabrice.gasnier@foss.st.com>,
<andi.shyti@kernel.org>, <ulf.hansson@linaro.org>,
<edumazet@google.com>, <kuba@kernel.org>, <pabeni@redhat.com>,
<hugues.fruchet@foss.st.com>, <lee@kernel.org>, <will@kernel.org>,
<catalin.marinas@arm.com>, <arnd@kernel.org>,
<richardcochran@gmail.com>, Frank Rowand <frowand.list@gmail.com>,
<peng.fan@oss.nxp.com>, <lars@metafoo.de>, <rcsekar@samsung.com>,
<wg@grandegger.com>, <mkl@pengutronix.de>
Cc: <linux-crypto@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <dmaengine@vger.kernel.org>,
<linux-i2c@vger.kernel.org>, <linux-iio@vger.kernel.org>,
<alsa-devel@alsa-project.org>, <linux-media@vger.kernel.org>,
<linux-mmc@vger.kernel.org>, <netdev@vger.kernel.org>,
<linux-phy@lists.infradead.org>, <linux-serial@vger.kernel.org>,
<linux-spi@vger.kernel.org>, <linux-usb@vger.kernel.org>,
Gatien Chevallier <gatien.chevallier@foss.st.com>
Subject: [PATCH v9 12/13] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
Date: Fri, 5 Jan 2024 14:04:03 +0100 [thread overview]
Message-ID: <20240105130404.301172-13-gatien.chevallier@foss.st.com> (raw)
In-Reply-To: <20240105130404.301172-1-gatien.chevallier@foss.st.com>
ETZPC is a firewall controller. Put all peripherals filtered by the
ETZPC as ETZPC subnodes and keep the "simple-bus" compatible for
backward compatibility.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
---
Changes in V7:
- Keep simple-bus compatible
- Remove access-controllers reference in this patch
Changes in V6:
- Renamed access-controller to access-controllers
- Removal of access-control-provider property
Changes in V5:
- Renamed feature-domain* to access-control*
arch/arm/boot/dts/st/stm32mp131.dtsi | 1037 +++++++++++++------------
arch/arm/boot/dts/st/stm32mp133.dtsi | 50 +-
arch/arm/boot/dts/st/stm32mp13xc.dtsi | 18 +-
arch/arm/boot/dts/st/stm32mp13xf.dtsi | 18 +-
4 files changed, 564 insertions(+), 559 deletions(-)
diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi
index b04d24c939c3..6ba8e3fd43b0 100644
--- a/arch/arm/boot/dts/st/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp131.dtsi
@@ -745,340 +745,6 @@ dmamux1: dma-router@48002000 {
dma-channels = <16>;
};
- adc_2: adc@48004000 {
- compatible = "st,stm32mp13-adc-core";
- reg = <0x48004000 0x400>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc ADC2>, <&rcc ADC2_K>;
- clock-names = "bus", "adc";
- interrupt-controller;
- #interrupt-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- adc2: adc@0 {
- compatible = "st,stm32mp13-adc";
- #io-channel-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0>;
- interrupt-parent = <&adc_2>;
- interrupts = <0>;
- dmas = <&dmamux1 10 0x400 0x80000001>;
- dma-names = "rx";
- status = "disabled";
-
- channel@13 {
- reg = <13>;
- label = "vrefint";
- };
- channel@14 {
- reg = <14>;
- label = "vddcore";
- };
- channel@16 {
- reg = <16>;
- label = "vddcpu";
- };
- channel@17 {
- reg = <17>;
- label = "vddq_ddr";
- };
- };
- };
-
- usbotg_hs: usb@49000000 {
- compatible = "st,stm32mp15-hsotg", "snps,dwc2";
- reg = <0x49000000 0x40000>;
- clocks = <&rcc USBO_K>;
- clock-names = "otg";
- resets = <&rcc USBO_R>;
- reset-names = "dwc2";
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- g-rx-fifo-size = <512>;
- g-np-tx-fifo-size = <32>;
- g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
- dr_mode = "otg";
- otg-rev = <0x200>;
- usb33d-supply = <&scmi_usb33>;
- status = "disabled";
- };
-
- usart1: serial@4c000000 {
- compatible = "st,stm32h7-uart";
- reg = <0x4c000000 0x400>;
- interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc USART1_K>;
- resets = <&rcc USART1_R>;
- wakeup-source;
- dmas = <&dmamux1 41 0x400 0x5>,
- <&dmamux1 42 0x400 0x1>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- usart2: serial@4c001000 {
- compatible = "st,stm32h7-uart";
- reg = <0x4c001000 0x400>;
- interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc USART2_K>;
- resets = <&rcc USART2_R>;
- wakeup-source;
- dmas = <&dmamux1 43 0x400 0x5>,
- <&dmamux1 44 0x400 0x1>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- i2s4: audio-controller@4c002000 {
- compatible = "st,stm32h7-i2s";
- reg = <0x4c002000 0x400>;
- #sound-dai-cells = <0>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmamux1 83 0x400 0x01>,
- <&dmamux1 84 0x400 0x01>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- spi4: spi@4c002000 {
- compatible = "st,stm32h7-spi";
- reg = <0x4c002000 0x400>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SPI4_K>;
- resets = <&rcc SPI4_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- dmas = <&dmamux1 83 0x400 0x01>,
- <&dmamux1 84 0x400 0x01>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- spi5: spi@4c003000 {
- compatible = "st,stm32h7-spi";
- reg = <0x4c003000 0x400>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SPI5_K>;
- resets = <&rcc SPI5_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- dmas = <&dmamux1 85 0x400 0x01>,
- <&dmamux1 86 0x400 0x01>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- i2c3: i2c@4c004000 {
- compatible = "st,stm32mp13-i2c";
- reg = <0x4c004000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C3_K>;
- resets = <&rcc I2C3_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- dmas = <&dmamux1 73 0x400 0x1>,
- <&dmamux1 74 0x400 0x1>;
- dma-names = "rx", "tx";
- st,syscfg-fmp = <&syscfg 0x4 0x4>;
- i2c-analog-filter;
- status = "disabled";
- };
-
- i2c4: i2c@4c005000 {
- compatible = "st,stm32mp13-i2c";
- reg = <0x4c005000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C4_K>;
- resets = <&rcc I2C4_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- dmas = <&dmamux1 75 0x400 0x1>,
- <&dmamux1 76 0x400 0x1>;
- dma-names = "rx", "tx";
- st,syscfg-fmp = <&syscfg 0x4 0x8>;
- i2c-analog-filter;
- status = "disabled";
- };
-
- i2c5: i2c@4c006000 {
- compatible = "st,stm32mp13-i2c";
- reg = <0x4c006000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C5_K>;
- resets = <&rcc I2C5_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- dmas = <&dmamux1 115 0x400 0x1>,
- <&dmamux1 116 0x400 0x1>;
- dma-names = "rx", "tx";
- st,syscfg-fmp = <&syscfg 0x4 0x10>;
- i2c-analog-filter;
- status = "disabled";
- };
-
- timers12: timer@4c007000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c007000 0x400>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM12_K>;
- clock-names = "int";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@11 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <11>;
- status = "disabled";
- };
- };
-
- timers13: timer@4c008000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c008000 0x400>;
- interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM13_K>;
- clock-names = "int";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@12 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <12>;
- status = "disabled";
- };
- };
-
- timers14: timer@4c009000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c009000 0x400>;
- interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM14_K>;
- clock-names = "int";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@13 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <13>;
- status = "disabled";
- };
- };
-
- timers15: timer@4c00a000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c00a000 0x400>;
- interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM15_K>;
- clock-names = "int";
- dmas = <&dmamux1 105 0x400 0x1>,
- <&dmamux1 106 0x400 0x1>,
- <&dmamux1 107 0x400 0x1>,
- <&dmamux1 108 0x400 0x1>;
- dma-names = "ch1", "up", "trig", "com";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@14 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <14>;
- status = "disabled";
- };
- };
-
- timers16: timer@4c00b000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c00b000 0x400>;
- interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM16_K>;
- clock-names = "int";
- dmas = <&dmamux1 109 0x400 0x1>,
- <&dmamux1 110 0x400 0x1>;
- dma-names = "ch1", "up";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@15 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <15>;
- status = "disabled";
- };
- };
-
- timers17: timer@4c00c000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c00c000 0x400>;
- interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM17_K>;
- clock-names = "int";
- dmas = <&dmamux1 111 0x400 0x1>,
- <&dmamux1 112 0x400 0x1>;
- dma-names = "ch1", "up";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@16 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <16>;
- status = "disabled";
- };
- };
-
rcc: rcc@50000000 {
compatible = "st,stm32mp13-rcc", "syscon";
reg = <0x50000000 0x1000>;
@@ -1105,69 +771,6 @@ syscfg: syscon@50020000 {
clocks = <&rcc SYSCFG>;
};
- lptimer2: timer@50021000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-lptimer";
- reg = <0x50021000 0x400>;
- interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc LPTIM2_K>;
- clock-names = "mux";
- wakeup-source;
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm-lp";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- trigger@1 {
- compatible = "st,stm32-lptimer-trigger";
- reg = <1>;
- status = "disabled";
- };
-
- counter {
- compatible = "st,stm32-lptimer-counter";
- status = "disabled";
- };
-
- timer {
- compatible = "st,stm32-lptimer-timer";
- status = "disabled";
- };
- };
-
- lptimer3: timer@50022000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-lptimer";
- reg = <0x50022000 0x400>;
- interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc LPTIM3_K>;
- clock-names = "mux";
- wakeup-source;
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm-lp";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- trigger@2 {
- compatible = "st,stm32-lptimer-trigger";
- reg = <2>;
- status = "disabled";
- };
-
- timer {
- compatible = "st,stm32-lptimer-timer";
- status = "disabled";
- };
- };
-
lptimer4: timer@50023000 {
compatible = "st,stm32-lptimer";
reg = <0x50023000 0x400>;
@@ -1210,25 +813,6 @@ timer {
};
};
- hash: hash@54003000 {
- compatible = "st,stm32mp13-hash";
- reg = <0x54003000 0x400>;
- interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc HASH1>;
- resets = <&rcc HASH1_R>;
- dmas = <&mdma 30 0x2 0x1000a02 0x0 0x0>;
- dma-names = "in";
- status = "disabled";
- };
-
- rng: rng@54004000 {
- compatible = "st,stm32mp13-rng";
- reg = <0x54004000 0x400>;
- clocks = <&rcc RNG1_K>;
- resets = <&rcc RNG1_R>;
- status = "disabled";
- };
-
mdma: dma-controller@58000000 {
compatible = "st,stm32h7-mdma";
reg = <0x58000000 0x1000>;
@@ -1239,82 +823,6 @@ mdma: dma-controller@58000000 {
dma-requests = <48>;
};
- fmc: memory-controller@58002000 {
- compatible = "st,stm32mp1-fmc2-ebi";
- reg = <0x58002000 0x1000>;
- ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
- <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
- <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
- <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
- <4 0 0x80000000 0x10000000>; /* NAND */
- #address-cells = <2>;
- #size-cells = <1>;
- clocks = <&rcc FMC_K>;
- resets = <&rcc FMC_R>;
- status = "disabled";
-
- nand-controller@4,0 {
- compatible = "st,stm32mp1-fmc2-nfc";
- reg = <4 0x00000000 0x1000>,
- <4 0x08010000 0x1000>,
- <4 0x08020000 0x1000>,
- <4 0x01000000 0x1000>,
- <4 0x09010000 0x1000>,
- <4 0x09020000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&mdma 24 0x2 0x12000a02 0x0 0x0>,
- <&mdma 24 0x2 0x12000a08 0x0 0x0>,
- <&mdma 25 0x2 0x12000a0a 0x0 0x0>;
- dma-names = "tx", "rx", "ecc";
- status = "disabled";
- };
- };
-
- qspi: spi@58003000 {
- compatible = "st,stm32f469-qspi";
- reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
- reg-names = "qspi", "qspi_mm";
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&mdma 26 0x2 0x10100002 0x0 0x0>,
- <&mdma 26 0x2 0x10100008 0x0 0x0>;
- dma-names = "tx", "rx";
- clocks = <&rcc QSPI_K>;
- resets = <&rcc QSPI_R>;
- status = "disabled";
- };
-
- sdmmc1: mmc@58005000 {
- compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
- arm,primecell-periphid = <0x20253180>;
- reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SDMMC1_K>;
- clock-names = "apb_pclk";
- resets = <&rcc SDMMC1_R>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- max-frequency = <130000000>;
- status = "disabled";
- };
-
- sdmmc2: mmc@58007000 {
- compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
- arm,primecell-periphid = <0x20253180>;
- reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SDMMC2_K>;
- clock-names = "apb_pclk";
- resets = <&rcc SDMMC2_R>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- max-frequency = <130000000>;
- status = "disabled";
- };
-
usbh_ohci: usb@5800c000 {
compatible = "generic-ohci";
reg = <0x5800c000 0x1000>;
@@ -1342,29 +850,6 @@ iwdg2: watchdog@5a002000 {
status = "disabled";
};
- usbphyc: usbphyc@5a006000 {
- #address-cells = <1>;
- #size-cells = <0>;
- #clock-cells = <0>;
- compatible = "st,stm32mp1-usbphyc";
- reg = <0x5a006000 0x1000>;
- clocks = <&rcc USBPHY_K>;
- resets = <&rcc USBPHY_R>;
- vdda1v1-supply = <&scmi_reg11>;
- vdda1v8-supply = <&scmi_reg18>;
- status = "disabled";
-
- usbphyc_port0: usb-phy@0 {
- #phy-cells = <0>;
- reg = <0>;
- };
-
- usbphyc_port1: usb-phy@1 {
- #phy-cells = <1>;
- reg = <1>;
- };
- };
-
rtc: rtc@5c004000 {
compatible = "st,stm32mp1-rtc";
reg = <0x5c004000 0x400>;
@@ -1393,6 +878,527 @@ ts_cal2: calib@5e {
};
};
+ etzpc: bus@5c007000 {
+ compatible = "st,stm32-etzpc", "simple-bus";
+ reg = <0x5c007000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ adc_2: adc@48004000 {
+ compatible = "st,stm32mp13-adc-core";
+ reg = <0x48004000 0x400>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc ADC2>, <&rcc ADC2_K>;
+ clock-names = "bus", "adc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ adc2: adc@0 {
+ compatible = "st,stm32mp13-adc";
+ #io-channel-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+ interrupt-parent = <&adc_2>;
+ interrupts = <0>;
+ dmas = <&dmamux1 10 0x400 0x80000001>;
+ dma-names = "rx";
+ status = "disabled";
+
+ channel@13 {
+ reg = <13>;
+ label = "vrefint";
+ };
+ channel@14 {
+ reg = <14>;
+ label = "vddcore";
+ };
+ channel@16 {
+ reg = <16>;
+ label = "vddcpu";
+ };
+ channel@17 {
+ reg = <17>;
+ label = "vddq_ddr";
+ };
+ };
+ };
+
+ usbotg_hs: usb@49000000 {
+ compatible = "st,stm32mp15-hsotg", "snps,dwc2";
+ reg = <0x49000000 0x40000>;
+ clocks = <&rcc USBO_K>;
+ clock-names = "otg";
+ resets = <&rcc USBO_R>;
+ reset-names = "dwc2";
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ g-rx-fifo-size = <512>;
+ g-np-tx-fifo-size = <32>;
+ g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
+ dr_mode = "otg";
+ otg-rev = <0x200>;
+ usb33d-supply = <&scmi_usb33>;
+ status = "disabled";
+ };
+
+ usart1: serial@4c000000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4c000000 0x400>;
+ interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART1_K>;
+ resets = <&rcc USART1_R>;
+ wakeup-source;
+ dmas = <&dmamux1 41 0x400 0x5>,
+ <&dmamux1 42 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ usart2: serial@4c001000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4c001000 0x400>;
+ interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART2_K>;
+ resets = <&rcc USART2_R>;
+ wakeup-source;
+ dmas = <&dmamux1 43 0x400 0x5>,
+ <&dmamux1 44 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2s4: audio-controller@4c002000 {
+ compatible = "st,stm32h7-i2s";
+ reg = <0x4c002000 0x400>;
+ #sound-dai-cells = <0>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 83 0x400 0x01>,
+ <&dmamux1 84 0x400 0x01>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ spi4: spi@4c002000 {
+ compatible = "st,stm32h7-spi";
+ reg = <0x4c002000 0x400>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI4_K>;
+ resets = <&rcc SPI4_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmamux1 83 0x400 0x01>,
+ <&dmamux1 84 0x400 0x01>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ spi5: spi@4c003000 {
+ compatible = "st,stm32h7-spi";
+ reg = <0x4c003000 0x400>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI5_K>;
+ resets = <&rcc SPI5_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmamux1 85 0x400 0x01>,
+ <&dmamux1 86 0x400 0x01>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2c3: i2c@4c004000 {
+ compatible = "st,stm32mp13-i2c";
+ reg = <0x4c004000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C3_K>;
+ resets = <&rcc I2C3_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmamux1 73 0x400 0x1>,
+ <&dmamux1 74 0x400 0x1>;
+ dma-names = "rx", "tx";
+ st,syscfg-fmp = <&syscfg 0x4 0x4>;
+ i2c-analog-filter;
+ status = "disabled";
+ };
+
+ i2c4: i2c@4c005000 {
+ compatible = "st,stm32mp13-i2c";
+ reg = <0x4c005000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C4_K>;
+ resets = <&rcc I2C4_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmamux1 75 0x400 0x1>,
+ <&dmamux1 76 0x400 0x1>;
+ dma-names = "rx", "tx";
+ st,syscfg-fmp = <&syscfg 0x4 0x8>;
+ i2c-analog-filter;
+ status = "disabled";
+ };
+
+ i2c5: i2c@4c006000 {
+ compatible = "st,stm32mp13-i2c";
+ reg = <0x4c006000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C5_K>;
+ resets = <&rcc I2C5_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmamux1 115 0x400 0x1>,
+ <&dmamux1 116 0x400 0x1>;
+ dma-names = "rx", "tx";
+ st,syscfg-fmp = <&syscfg 0x4 0x10>;
+ i2c-analog-filter;
+ status = "disabled";
+ };
+
+ timers12: timer@4c007000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c007000 0x400>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM12_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@11 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <11>;
+ status = "disabled";
+ };
+ };
+
+ timers13: timer@4c008000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c008000 0x400>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM13_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@12 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <12>;
+ status = "disabled";
+ };
+ };
+
+ timers14: timer@4c009000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c009000 0x400>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM14_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@13 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <13>;
+ status = "disabled";
+ };
+ };
+
+ timers15: timer@4c00a000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c00a000 0x400>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM15_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 105 0x400 0x1>,
+ <&dmamux1 106 0x400 0x1>,
+ <&dmamux1 107 0x400 0x1>,
+ <&dmamux1 108 0x400 0x1>;
+ dma-names = "ch1", "up", "trig", "com";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@14 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <14>;
+ status = "disabled";
+ };
+ };
+
+ timers16: timer@4c00b000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c00b000 0x400>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM16_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 109 0x400 0x1>,
+ <&dmamux1 110 0x400 0x1>;
+ dma-names = "ch1", "up";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@15 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <15>;
+ status = "disabled";
+ };
+ };
+
+ timers17: timer@4c00c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c00c000 0x400>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM17_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 111 0x400 0x1>,
+ <&dmamux1 112 0x400 0x1>;
+ dma-names = "ch1", "up";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@16 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <16>;
+ status = "disabled";
+ };
+ };
+
+ lptimer2: timer@50021000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x50021000 0x400>;
+ interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc LPTIM2_K>;
+ clock-names = "mux";
+ wakeup-source;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ trigger@1 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <1>;
+ status = "disabled";
+ };
+
+ counter {
+ compatible = "st,stm32-lptimer-counter";
+ status = "disabled";
+ };
+
+ timer {
+ compatible = "st,stm32-lptimer-timer";
+ status = "disabled";
+ };
+ };
+
+ lptimer3: timer@50022000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x50022000 0x400>;
+ interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc LPTIM3_K>;
+ clock-names = "mux";
+ wakeup-source;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ trigger@2 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <2>;
+ status = "disabled";
+ };
+
+ timer {
+ compatible = "st,stm32-lptimer-timer";
+ status = "disabled";
+ };
+ };
+
+ hash: hash@54003000 {
+ compatible = "st,stm32mp13-hash";
+ reg = <0x54003000 0x400>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc HASH1>;
+ resets = <&rcc HASH1_R>;
+ dmas = <&mdma 30 0x2 0x1000a02 0x0 0x0>;
+ dma-names = "in";
+ };
+
+ rng: rng@54004000 {
+ compatible = "st,stm32mp13-rng";
+ reg = <0x54004000 0x400>;
+ clocks = <&rcc RNG1_K>;
+ resets = <&rcc RNG1_R>;
+ };
+
+ fmc: memory-controller@58002000 {
+ compatible = "st,stm32mp1-fmc2-ebi";
+ reg = <0x58002000 0x1000>;
+ ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
+ <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
+ <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
+ <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
+ <4 0 0x80000000 0x10000000>; /* NAND */
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clocks = <&rcc FMC_K>;
+ resets = <&rcc FMC_R>;
+ status = "disabled";
+
+ nand-controller@4,0 {
+ compatible = "st,stm32mp1-fmc2-nfc";
+ reg = <4 0x00000000 0x1000>,
+ <4 0x08010000 0x1000>,
+ <4 0x08020000 0x1000>,
+ <4 0x01000000 0x1000>,
+ <4 0x09010000 0x1000>,
+ <4 0x09020000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdma 24 0x2 0x12000a02 0x0 0x0>,
+ <&mdma 24 0x2 0x12000a08 0x0 0x0>,
+ <&mdma 25 0x2 0x12000a0a 0x0 0x0>;
+ dma-names = "tx", "rx", "ecc";
+ status = "disabled";
+ };
+ };
+
+ qspi: spi@58003000 {
+ compatible = "st,stm32f469-qspi";
+ reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+ reg-names = "qspi", "qspi_mm";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdma 26 0x2 0x10100002 0x0 0x0>,
+ <&mdma 26 0x2 0x10100008 0x0 0x0>;
+ dma-names = "tx", "rx";
+ clocks = <&rcc QSPI_K>;
+ resets = <&rcc QSPI_R>;
+ status = "disabled";
+ };
+
+ sdmmc1: mmc@58005000 {
+ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x20253180>;
+ reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SDMMC1_K>;
+ clock-names = "apb_pclk";
+ resets = <&rcc SDMMC1_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <130000000>;
+ status = "disabled";
+ };
+
+ sdmmc2: mmc@58007000 {
+ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x20253180>;
+ reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SDMMC2_K>;
+ clock-names = "apb_pclk";
+ resets = <&rcc SDMMC2_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <130000000>;
+ status = "disabled";
+ };
+
+ usbphyc: usbphyc@5a006000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <0>;
+ compatible = "st,stm32mp1-usbphyc";
+ reg = <0x5a006000 0x1000>;
+ clocks = <&rcc USBPHY_K>;
+ resets = <&rcc USBPHY_R>;
+ vdda1v1-supply = <&scmi_reg11>;
+ vdda1v8-supply = <&scmi_reg18>;
+ status = "disabled";
+
+ usbphyc_port0: usb-phy@0 {
+ #phy-cells = <0>;
+ reg = <0>;
+ };
+
+ usbphyc_port1: usb-phy@1 {
+ #phy-cells = <1>;
+ reg = <1>;
+ };
+ };
+ };
+
/*
* Break node order to solve dependency probe issue between
* pinctrl and exti.
@@ -1404,6 +1410,7 @@ pinctrl: pinctrl@50002000 {
ranges = <0 0x50002000 0x8400>;
interrupt-parent = <&exti>;
st,syscfg = <&exti 0x60 0xff>;
+ pins-are-numbered;
gpioa: gpio@50002000 {
gpio-controller;
diff --git a/arch/arm/boot/dts/st/stm32mp133.dtsi b/arch/arm/boot/dts/st/stm32mp133.dtsi
index df451c3c2a26..c4d3a520c14b 100644
--- a/arch/arm/boot/dts/st/stm32mp133.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp133.dtsi
@@ -33,35 +33,37 @@ m_can2: can@4400f000 {
bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
status = "disabled";
};
+ };
+};
- adc_1: adc@48003000 {
- compatible = "st,stm32mp13-adc-core";
- reg = <0x48003000 0x400>;
- interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc ADC1>, <&rcc ADC1_K>;
- clock-names = "bus", "adc";
- interrupt-controller;
- #interrupt-cells = <1>;
+&etzpc {
+ adc_1: adc@48003000 {
+ compatible = "st,stm32mp13-adc-core";
+ reg = <0x48003000 0x400>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc ADC1>, <&rcc ADC1_K>;
+ clock-names = "bus", "adc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ adc1: adc@0 {
+ compatible = "st,stm32mp13-adc";
+ #io-channel-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
+ reg = <0x0>;
+ interrupt-parent = <&adc_1>;
+ interrupts = <0>;
+ dmas = <&dmamux1 9 0x400 0x80000001>;
+ dma-names = "rx";
status = "disabled";
- adc1: adc@0 {
- compatible = "st,stm32mp13-adc";
- #io-channel-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0>;
- interrupt-parent = <&adc_1>;
- interrupts = <0>;
- dmas = <&dmamux1 9 0x400 0x80000001>;
- dma-names = "rx";
- status = "disabled";
-
- channel@18 {
- reg = <18>;
- label = "vrefint";
- };
+ channel@18 {
+ reg = <18>;
+ label = "vrefint";
};
};
};
diff --git a/arch/arm/boot/dts/st/stm32mp13xc.dtsi b/arch/arm/boot/dts/st/stm32mp13xc.dtsi
index 4d00e7592882..b9fb071a1471 100644
--- a/arch/arm/boot/dts/st/stm32mp13xc.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp13xc.dtsi
@@ -4,15 +4,13 @@
* Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
*/
-/ {
- soc {
- cryp: crypto@54002000 {
- compatible = "st,stm32mp1-cryp";
- reg = <0x54002000 0x400>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc CRYP1>;
- resets = <&rcc CRYP1_R>;
- status = "disabled";
- };
+&etzpc {
+ cryp: crypto@54002000 {
+ compatible = "st,stm32mp1-cryp";
+ reg = <0x54002000 0x400>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CRYP1>;
+ resets = <&rcc CRYP1_R>;
+ status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/st/stm32mp13xf.dtsi b/arch/arm/boot/dts/st/stm32mp13xf.dtsi
index 4d00e7592882..b9fb071a1471 100644
--- a/arch/arm/boot/dts/st/stm32mp13xf.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp13xf.dtsi
@@ -4,15 +4,13 @@
* Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
*/
-/ {
- soc {
- cryp: crypto@54002000 {
- compatible = "st,stm32mp1-cryp";
- reg = <0x54002000 0x400>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc CRYP1>;
- resets = <&rcc CRYP1_R>;
- status = "disabled";
- };
+&etzpc {
+ cryp: crypto@54002000 {
+ compatible = "st,stm32mp1-cryp";
+ reg = <0x54002000 0x400>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CRYP1>;
+ resets = <&rcc CRYP1_R>;
+ status = "disabled";
};
};
--
2.35.3
WARNING: multiple messages have this Message-ID (diff)
From: Gatien Chevallier <gatien.chevallier@foss.st.com>
To: <Oleksii_Moisieiev@epam.com>, <gregkh@linuxfoundation.org>,
<herbert@gondor.apana.org.au>, <davem@davemloft.net>,
<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
<conor+dt@kernel.org>, <alexandre.torgue@foss.st.com>,
<vkoul@kernel.org>, <jic23@kernel.org>,
<olivier.moysan@foss.st.com>, <arnaud.pouliquen@foss.st.com>,
<mchehab@kernel.org>, <fabrice.gasnier@foss.st.com>,
<andi.shyti@kernel.org>, <ulf.hansson@linaro.org>,
<edumazet@google.com>, <kuba@kernel.org>, <pabeni@redhat.com>,
<hugues.fruchet@foss.st.com>, <lee@kernel.org>, <will@kernel.org>,
<catalin.marinas@arm.com>, <arnd@kernel.org>,
<richardcochran@gmail.com>, Frank Rowand <frowand.list@gmail.com>,
<peng.fan@oss.nxp.com>, <lars@metafoo.de>, <rcsekar@samsung.com>,
<wg@grandegger.com>, <mkl@pengutronix.de>
Cc: <linux-crypto@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <dmaengine@vger.kernel.org>,
<linux-i2c@vger.kernel.org>, <linux-iio@vger.kernel.org>,
<alsa-devel@alsa-project.org>, <linux-media@vger.kernel.org>,
<linux-mmc@vger.kernel.org>, <netdev@vger.kernel.org>,
<linux-phy@lists.infradead.org>, <linux-serial@vger.kernel.org>,
<linux-spi@vger.kernel.org>, <linux-usb@vger.kernel.org>,
Gatien Chevallier <gatien.chevallier@foss.st.com>
Subject: [PATCH v9 12/13] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
Date: Fri, 5 Jan 2024 14:04:03 +0100 [thread overview]
Message-ID: <20240105130404.301172-13-gatien.chevallier@foss.st.com> (raw)
In-Reply-To: <20240105130404.301172-1-gatien.chevallier@foss.st.com>
ETZPC is a firewall controller. Put all peripherals filtered by the
ETZPC as ETZPC subnodes and keep the "simple-bus" compatible for
backward compatibility.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
---
Changes in V7:
- Keep simple-bus compatible
- Remove access-controllers reference in this patch
Changes in V6:
- Renamed access-controller to access-controllers
- Removal of access-control-provider property
Changes in V5:
- Renamed feature-domain* to access-control*
arch/arm/boot/dts/st/stm32mp131.dtsi | 1037 +++++++++++++------------
arch/arm/boot/dts/st/stm32mp133.dtsi | 50 +-
arch/arm/boot/dts/st/stm32mp13xc.dtsi | 18 +-
arch/arm/boot/dts/st/stm32mp13xf.dtsi | 18 +-
4 files changed, 564 insertions(+), 559 deletions(-)
diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi
index b04d24c939c3..6ba8e3fd43b0 100644
--- a/arch/arm/boot/dts/st/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp131.dtsi
@@ -745,340 +745,6 @@ dmamux1: dma-router@48002000 {
dma-channels = <16>;
};
- adc_2: adc@48004000 {
- compatible = "st,stm32mp13-adc-core";
- reg = <0x48004000 0x400>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc ADC2>, <&rcc ADC2_K>;
- clock-names = "bus", "adc";
- interrupt-controller;
- #interrupt-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- adc2: adc@0 {
- compatible = "st,stm32mp13-adc";
- #io-channel-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0>;
- interrupt-parent = <&adc_2>;
- interrupts = <0>;
- dmas = <&dmamux1 10 0x400 0x80000001>;
- dma-names = "rx";
- status = "disabled";
-
- channel@13 {
- reg = <13>;
- label = "vrefint";
- };
- channel@14 {
- reg = <14>;
- label = "vddcore";
- };
- channel@16 {
- reg = <16>;
- label = "vddcpu";
- };
- channel@17 {
- reg = <17>;
- label = "vddq_ddr";
- };
- };
- };
-
- usbotg_hs: usb@49000000 {
- compatible = "st,stm32mp15-hsotg", "snps,dwc2";
- reg = <0x49000000 0x40000>;
- clocks = <&rcc USBO_K>;
- clock-names = "otg";
- resets = <&rcc USBO_R>;
- reset-names = "dwc2";
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- g-rx-fifo-size = <512>;
- g-np-tx-fifo-size = <32>;
- g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
- dr_mode = "otg";
- otg-rev = <0x200>;
- usb33d-supply = <&scmi_usb33>;
- status = "disabled";
- };
-
- usart1: serial@4c000000 {
- compatible = "st,stm32h7-uart";
- reg = <0x4c000000 0x400>;
- interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc USART1_K>;
- resets = <&rcc USART1_R>;
- wakeup-source;
- dmas = <&dmamux1 41 0x400 0x5>,
- <&dmamux1 42 0x400 0x1>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- usart2: serial@4c001000 {
- compatible = "st,stm32h7-uart";
- reg = <0x4c001000 0x400>;
- interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc USART2_K>;
- resets = <&rcc USART2_R>;
- wakeup-source;
- dmas = <&dmamux1 43 0x400 0x5>,
- <&dmamux1 44 0x400 0x1>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- i2s4: audio-controller@4c002000 {
- compatible = "st,stm32h7-i2s";
- reg = <0x4c002000 0x400>;
- #sound-dai-cells = <0>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmamux1 83 0x400 0x01>,
- <&dmamux1 84 0x400 0x01>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- spi4: spi@4c002000 {
- compatible = "st,stm32h7-spi";
- reg = <0x4c002000 0x400>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SPI4_K>;
- resets = <&rcc SPI4_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- dmas = <&dmamux1 83 0x400 0x01>,
- <&dmamux1 84 0x400 0x01>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- spi5: spi@4c003000 {
- compatible = "st,stm32h7-spi";
- reg = <0x4c003000 0x400>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SPI5_K>;
- resets = <&rcc SPI5_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- dmas = <&dmamux1 85 0x400 0x01>,
- <&dmamux1 86 0x400 0x01>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- i2c3: i2c@4c004000 {
- compatible = "st,stm32mp13-i2c";
- reg = <0x4c004000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C3_K>;
- resets = <&rcc I2C3_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- dmas = <&dmamux1 73 0x400 0x1>,
- <&dmamux1 74 0x400 0x1>;
- dma-names = "rx", "tx";
- st,syscfg-fmp = <&syscfg 0x4 0x4>;
- i2c-analog-filter;
- status = "disabled";
- };
-
- i2c4: i2c@4c005000 {
- compatible = "st,stm32mp13-i2c";
- reg = <0x4c005000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C4_K>;
- resets = <&rcc I2C4_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- dmas = <&dmamux1 75 0x400 0x1>,
- <&dmamux1 76 0x400 0x1>;
- dma-names = "rx", "tx";
- st,syscfg-fmp = <&syscfg 0x4 0x8>;
- i2c-analog-filter;
- status = "disabled";
- };
-
- i2c5: i2c@4c006000 {
- compatible = "st,stm32mp13-i2c";
- reg = <0x4c006000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C5_K>;
- resets = <&rcc I2C5_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- dmas = <&dmamux1 115 0x400 0x1>,
- <&dmamux1 116 0x400 0x1>;
- dma-names = "rx", "tx";
- st,syscfg-fmp = <&syscfg 0x4 0x10>;
- i2c-analog-filter;
- status = "disabled";
- };
-
- timers12: timer@4c007000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c007000 0x400>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM12_K>;
- clock-names = "int";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@11 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <11>;
- status = "disabled";
- };
- };
-
- timers13: timer@4c008000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c008000 0x400>;
- interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM13_K>;
- clock-names = "int";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@12 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <12>;
- status = "disabled";
- };
- };
-
- timers14: timer@4c009000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c009000 0x400>;
- interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM14_K>;
- clock-names = "int";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@13 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <13>;
- status = "disabled";
- };
- };
-
- timers15: timer@4c00a000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c00a000 0x400>;
- interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM15_K>;
- clock-names = "int";
- dmas = <&dmamux1 105 0x400 0x1>,
- <&dmamux1 106 0x400 0x1>,
- <&dmamux1 107 0x400 0x1>,
- <&dmamux1 108 0x400 0x1>;
- dma-names = "ch1", "up", "trig", "com";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@14 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <14>;
- status = "disabled";
- };
- };
-
- timers16: timer@4c00b000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c00b000 0x400>;
- interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM16_K>;
- clock-names = "int";
- dmas = <&dmamux1 109 0x400 0x1>,
- <&dmamux1 110 0x400 0x1>;
- dma-names = "ch1", "up";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@15 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <15>;
- status = "disabled";
- };
- };
-
- timers17: timer@4c00c000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c00c000 0x400>;
- interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM17_K>;
- clock-names = "int";
- dmas = <&dmamux1 111 0x400 0x1>,
- <&dmamux1 112 0x400 0x1>;
- dma-names = "ch1", "up";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@16 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <16>;
- status = "disabled";
- };
- };
-
rcc: rcc@50000000 {
compatible = "st,stm32mp13-rcc", "syscon";
reg = <0x50000000 0x1000>;
@@ -1105,69 +771,6 @@ syscfg: syscon@50020000 {
clocks = <&rcc SYSCFG>;
};
- lptimer2: timer@50021000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-lptimer";
- reg = <0x50021000 0x400>;
- interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc LPTIM2_K>;
- clock-names = "mux";
- wakeup-source;
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm-lp";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- trigger@1 {
- compatible = "st,stm32-lptimer-trigger";
- reg = <1>;
- status = "disabled";
- };
-
- counter {
- compatible = "st,stm32-lptimer-counter";
- status = "disabled";
- };
-
- timer {
- compatible = "st,stm32-lptimer-timer";
- status = "disabled";
- };
- };
-
- lptimer3: timer@50022000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-lptimer";
- reg = <0x50022000 0x400>;
- interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc LPTIM3_K>;
- clock-names = "mux";
- wakeup-source;
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm-lp";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- trigger@2 {
- compatible = "st,stm32-lptimer-trigger";
- reg = <2>;
- status = "disabled";
- };
-
- timer {
- compatible = "st,stm32-lptimer-timer";
- status = "disabled";
- };
- };
-
lptimer4: timer@50023000 {
compatible = "st,stm32-lptimer";
reg = <0x50023000 0x400>;
@@ -1210,25 +813,6 @@ timer {
};
};
- hash: hash@54003000 {
- compatible = "st,stm32mp13-hash";
- reg = <0x54003000 0x400>;
- interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc HASH1>;
- resets = <&rcc HASH1_R>;
- dmas = <&mdma 30 0x2 0x1000a02 0x0 0x0>;
- dma-names = "in";
- status = "disabled";
- };
-
- rng: rng@54004000 {
- compatible = "st,stm32mp13-rng";
- reg = <0x54004000 0x400>;
- clocks = <&rcc RNG1_K>;
- resets = <&rcc RNG1_R>;
- status = "disabled";
- };
-
mdma: dma-controller@58000000 {
compatible = "st,stm32h7-mdma";
reg = <0x58000000 0x1000>;
@@ -1239,82 +823,6 @@ mdma: dma-controller@58000000 {
dma-requests = <48>;
};
- fmc: memory-controller@58002000 {
- compatible = "st,stm32mp1-fmc2-ebi";
- reg = <0x58002000 0x1000>;
- ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
- <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
- <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
- <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
- <4 0 0x80000000 0x10000000>; /* NAND */
- #address-cells = <2>;
- #size-cells = <1>;
- clocks = <&rcc FMC_K>;
- resets = <&rcc FMC_R>;
- status = "disabled";
-
- nand-controller@4,0 {
- compatible = "st,stm32mp1-fmc2-nfc";
- reg = <4 0x00000000 0x1000>,
- <4 0x08010000 0x1000>,
- <4 0x08020000 0x1000>,
- <4 0x01000000 0x1000>,
- <4 0x09010000 0x1000>,
- <4 0x09020000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&mdma 24 0x2 0x12000a02 0x0 0x0>,
- <&mdma 24 0x2 0x12000a08 0x0 0x0>,
- <&mdma 25 0x2 0x12000a0a 0x0 0x0>;
- dma-names = "tx", "rx", "ecc";
- status = "disabled";
- };
- };
-
- qspi: spi@58003000 {
- compatible = "st,stm32f469-qspi";
- reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
- reg-names = "qspi", "qspi_mm";
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&mdma 26 0x2 0x10100002 0x0 0x0>,
- <&mdma 26 0x2 0x10100008 0x0 0x0>;
- dma-names = "tx", "rx";
- clocks = <&rcc QSPI_K>;
- resets = <&rcc QSPI_R>;
- status = "disabled";
- };
-
- sdmmc1: mmc@58005000 {
- compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
- arm,primecell-periphid = <0x20253180>;
- reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SDMMC1_K>;
- clock-names = "apb_pclk";
- resets = <&rcc SDMMC1_R>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- max-frequency = <130000000>;
- status = "disabled";
- };
-
- sdmmc2: mmc@58007000 {
- compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
- arm,primecell-periphid = <0x20253180>;
- reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SDMMC2_K>;
- clock-names = "apb_pclk";
- resets = <&rcc SDMMC2_R>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- max-frequency = <130000000>;
- status = "disabled";
- };
-
usbh_ohci: usb@5800c000 {
compatible = "generic-ohci";
reg = <0x5800c000 0x1000>;
@@ -1342,29 +850,6 @@ iwdg2: watchdog@5a002000 {
status = "disabled";
};
- usbphyc: usbphyc@5a006000 {
- #address-cells = <1>;
- #size-cells = <0>;
- #clock-cells = <0>;
- compatible = "st,stm32mp1-usbphyc";
- reg = <0x5a006000 0x1000>;
- clocks = <&rcc USBPHY_K>;
- resets = <&rcc USBPHY_R>;
- vdda1v1-supply = <&scmi_reg11>;
- vdda1v8-supply = <&scmi_reg18>;
- status = "disabled";
-
- usbphyc_port0: usb-phy@0 {
- #phy-cells = <0>;
- reg = <0>;
- };
-
- usbphyc_port1: usb-phy@1 {
- #phy-cells = <1>;
- reg = <1>;
- };
- };
-
rtc: rtc@5c004000 {
compatible = "st,stm32mp1-rtc";
reg = <0x5c004000 0x400>;
@@ -1393,6 +878,527 @@ ts_cal2: calib@5e {
};
};
+ etzpc: bus@5c007000 {
+ compatible = "st,stm32-etzpc", "simple-bus";
+ reg = <0x5c007000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ adc_2: adc@48004000 {
+ compatible = "st,stm32mp13-adc-core";
+ reg = <0x48004000 0x400>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc ADC2>, <&rcc ADC2_K>;
+ clock-names = "bus", "adc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ adc2: adc@0 {
+ compatible = "st,stm32mp13-adc";
+ #io-channel-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+ interrupt-parent = <&adc_2>;
+ interrupts = <0>;
+ dmas = <&dmamux1 10 0x400 0x80000001>;
+ dma-names = "rx";
+ status = "disabled";
+
+ channel@13 {
+ reg = <13>;
+ label = "vrefint";
+ };
+ channel@14 {
+ reg = <14>;
+ label = "vddcore";
+ };
+ channel@16 {
+ reg = <16>;
+ label = "vddcpu";
+ };
+ channel@17 {
+ reg = <17>;
+ label = "vddq_ddr";
+ };
+ };
+ };
+
+ usbotg_hs: usb@49000000 {
+ compatible = "st,stm32mp15-hsotg", "snps,dwc2";
+ reg = <0x49000000 0x40000>;
+ clocks = <&rcc USBO_K>;
+ clock-names = "otg";
+ resets = <&rcc USBO_R>;
+ reset-names = "dwc2";
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ g-rx-fifo-size = <512>;
+ g-np-tx-fifo-size = <32>;
+ g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
+ dr_mode = "otg";
+ otg-rev = <0x200>;
+ usb33d-supply = <&scmi_usb33>;
+ status = "disabled";
+ };
+
+ usart1: serial@4c000000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4c000000 0x400>;
+ interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART1_K>;
+ resets = <&rcc USART1_R>;
+ wakeup-source;
+ dmas = <&dmamux1 41 0x400 0x5>,
+ <&dmamux1 42 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ usart2: serial@4c001000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4c001000 0x400>;
+ interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART2_K>;
+ resets = <&rcc USART2_R>;
+ wakeup-source;
+ dmas = <&dmamux1 43 0x400 0x5>,
+ <&dmamux1 44 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2s4: audio-controller@4c002000 {
+ compatible = "st,stm32h7-i2s";
+ reg = <0x4c002000 0x400>;
+ #sound-dai-cells = <0>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 83 0x400 0x01>,
+ <&dmamux1 84 0x400 0x01>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ spi4: spi@4c002000 {
+ compatible = "st,stm32h7-spi";
+ reg = <0x4c002000 0x400>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI4_K>;
+ resets = <&rcc SPI4_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmamux1 83 0x400 0x01>,
+ <&dmamux1 84 0x400 0x01>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ spi5: spi@4c003000 {
+ compatible = "st,stm32h7-spi";
+ reg = <0x4c003000 0x400>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI5_K>;
+ resets = <&rcc SPI5_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmamux1 85 0x400 0x01>,
+ <&dmamux1 86 0x400 0x01>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2c3: i2c@4c004000 {
+ compatible = "st,stm32mp13-i2c";
+ reg = <0x4c004000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C3_K>;
+ resets = <&rcc I2C3_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmamux1 73 0x400 0x1>,
+ <&dmamux1 74 0x400 0x1>;
+ dma-names = "rx", "tx";
+ st,syscfg-fmp = <&syscfg 0x4 0x4>;
+ i2c-analog-filter;
+ status = "disabled";
+ };
+
+ i2c4: i2c@4c005000 {
+ compatible = "st,stm32mp13-i2c";
+ reg = <0x4c005000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C4_K>;
+ resets = <&rcc I2C4_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmamux1 75 0x400 0x1>,
+ <&dmamux1 76 0x400 0x1>;
+ dma-names = "rx", "tx";
+ st,syscfg-fmp = <&syscfg 0x4 0x8>;
+ i2c-analog-filter;
+ status = "disabled";
+ };
+
+ i2c5: i2c@4c006000 {
+ compatible = "st,stm32mp13-i2c";
+ reg = <0x4c006000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C5_K>;
+ resets = <&rcc I2C5_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmamux1 115 0x400 0x1>,
+ <&dmamux1 116 0x400 0x1>;
+ dma-names = "rx", "tx";
+ st,syscfg-fmp = <&syscfg 0x4 0x10>;
+ i2c-analog-filter;
+ status = "disabled";
+ };
+
+ timers12: timer@4c007000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c007000 0x400>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM12_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@11 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <11>;
+ status = "disabled";
+ };
+ };
+
+ timers13: timer@4c008000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c008000 0x400>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM13_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@12 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <12>;
+ status = "disabled";
+ };
+ };
+
+ timers14: timer@4c009000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c009000 0x400>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM14_K>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@13 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <13>;
+ status = "disabled";
+ };
+ };
+
+ timers15: timer@4c00a000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c00a000 0x400>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM15_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 105 0x400 0x1>,
+ <&dmamux1 106 0x400 0x1>,
+ <&dmamux1 107 0x400 0x1>,
+ <&dmamux1 108 0x400 0x1>;
+ dma-names = "ch1", "up", "trig", "com";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@14 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <14>;
+ status = "disabled";
+ };
+ };
+
+ timers16: timer@4c00b000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c00b000 0x400>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM16_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 109 0x400 0x1>,
+ <&dmamux1 110 0x400 0x1>;
+ dma-names = "ch1", "up";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@15 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <15>;
+ status = "disabled";
+ };
+ };
+
+ timers17: timer@4c00c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c00c000 0x400>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM17_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 111 0x400 0x1>,
+ <&dmamux1 112 0x400 0x1>;
+ dma-names = "ch1", "up";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@16 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <16>;
+ status = "disabled";
+ };
+ };
+
+ lptimer2: timer@50021000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x50021000 0x400>;
+ interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc LPTIM2_K>;
+ clock-names = "mux";
+ wakeup-source;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ trigger@1 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <1>;
+ status = "disabled";
+ };
+
+ counter {
+ compatible = "st,stm32-lptimer-counter";
+ status = "disabled";
+ };
+
+ timer {
+ compatible = "st,stm32-lptimer-timer";
+ status = "disabled";
+ };
+ };
+
+ lptimer3: timer@50022000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x50022000 0x400>;
+ interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc LPTIM3_K>;
+ clock-names = "mux";
+ wakeup-source;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ trigger@2 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <2>;
+ status = "disabled";
+ };
+
+ timer {
+ compatible = "st,stm32-lptimer-timer";
+ status = "disabled";
+ };
+ };
+
+ hash: hash@54003000 {
+ compatible = "st,stm32mp13-hash";
+ reg = <0x54003000 0x400>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc HASH1>;
+ resets = <&rcc HASH1_R>;
+ dmas = <&mdma 30 0x2 0x1000a02 0x0 0x0>;
+ dma-names = "in";
+ };
+
+ rng: rng@54004000 {
+ compatible = "st,stm32mp13-rng";
+ reg = <0x54004000 0x400>;
+ clocks = <&rcc RNG1_K>;
+ resets = <&rcc RNG1_R>;
+ };
+
+ fmc: memory-controller@58002000 {
+ compatible = "st,stm32mp1-fmc2-ebi";
+ reg = <0x58002000 0x1000>;
+ ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
+ <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
+ <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
+ <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
+ <4 0 0x80000000 0x10000000>; /* NAND */
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clocks = <&rcc FMC_K>;
+ resets = <&rcc FMC_R>;
+ status = "disabled";
+
+ nand-controller@4,0 {
+ compatible = "st,stm32mp1-fmc2-nfc";
+ reg = <4 0x00000000 0x1000>,
+ <4 0x08010000 0x1000>,
+ <4 0x08020000 0x1000>,
+ <4 0x01000000 0x1000>,
+ <4 0x09010000 0x1000>,
+ <4 0x09020000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdma 24 0x2 0x12000a02 0x0 0x0>,
+ <&mdma 24 0x2 0x12000a08 0x0 0x0>,
+ <&mdma 25 0x2 0x12000a0a 0x0 0x0>;
+ dma-names = "tx", "rx", "ecc";
+ status = "disabled";
+ };
+ };
+
+ qspi: spi@58003000 {
+ compatible = "st,stm32f469-qspi";
+ reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+ reg-names = "qspi", "qspi_mm";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdma 26 0x2 0x10100002 0x0 0x0>,
+ <&mdma 26 0x2 0x10100008 0x0 0x0>;
+ dma-names = "tx", "rx";
+ clocks = <&rcc QSPI_K>;
+ resets = <&rcc QSPI_R>;
+ status = "disabled";
+ };
+
+ sdmmc1: mmc@58005000 {
+ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x20253180>;
+ reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SDMMC1_K>;
+ clock-names = "apb_pclk";
+ resets = <&rcc SDMMC1_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <130000000>;
+ status = "disabled";
+ };
+
+ sdmmc2: mmc@58007000 {
+ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x20253180>;
+ reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SDMMC2_K>;
+ clock-names = "apb_pclk";
+ resets = <&rcc SDMMC2_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <130000000>;
+ status = "disabled";
+ };
+
+ usbphyc: usbphyc@5a006000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <0>;
+ compatible = "st,stm32mp1-usbphyc";
+ reg = <0x5a006000 0x1000>;
+ clocks = <&rcc USBPHY_K>;
+ resets = <&rcc USBPHY_R>;
+ vdda1v1-supply = <&scmi_reg11>;
+ vdda1v8-supply = <&scmi_reg18>;
+ status = "disabled";
+
+ usbphyc_port0: usb-phy@0 {
+ #phy-cells = <0>;
+ reg = <0>;
+ };
+
+ usbphyc_port1: usb-phy@1 {
+ #phy-cells = <1>;
+ reg = <1>;
+ };
+ };
+ };
+
/*
* Break node order to solve dependency probe issue between
* pinctrl and exti.
@@ -1404,6 +1410,7 @@ pinctrl: pinctrl@50002000 {
ranges = <0 0x50002000 0x8400>;
interrupt-parent = <&exti>;
st,syscfg = <&exti 0x60 0xff>;
+ pins-are-numbered;
gpioa: gpio@50002000 {
gpio-controller;
diff --git a/arch/arm/boot/dts/st/stm32mp133.dtsi b/arch/arm/boot/dts/st/stm32mp133.dtsi
index df451c3c2a26..c4d3a520c14b 100644
--- a/arch/arm/boot/dts/st/stm32mp133.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp133.dtsi
@@ -33,35 +33,37 @@ m_can2: can@4400f000 {
bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
status = "disabled";
};
+ };
+};
- adc_1: adc@48003000 {
- compatible = "st,stm32mp13-adc-core";
- reg = <0x48003000 0x400>;
- interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc ADC1>, <&rcc ADC1_K>;
- clock-names = "bus", "adc";
- interrupt-controller;
- #interrupt-cells = <1>;
+&etzpc {
+ adc_1: adc@48003000 {
+ compatible = "st,stm32mp13-adc-core";
+ reg = <0x48003000 0x400>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc ADC1>, <&rcc ADC1_K>;
+ clock-names = "bus", "adc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ adc1: adc@0 {
+ compatible = "st,stm32mp13-adc";
+ #io-channel-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
+ reg = <0x0>;
+ interrupt-parent = <&adc_1>;
+ interrupts = <0>;
+ dmas = <&dmamux1 9 0x400 0x80000001>;
+ dma-names = "rx";
status = "disabled";
- adc1: adc@0 {
- compatible = "st,stm32mp13-adc";
- #io-channel-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0>;
- interrupt-parent = <&adc_1>;
- interrupts = <0>;
- dmas = <&dmamux1 9 0x400 0x80000001>;
- dma-names = "rx";
- status = "disabled";
-
- channel@18 {
- reg = <18>;
- label = "vrefint";
- };
+ channel@18 {
+ reg = <18>;
+ label = "vrefint";
};
};
};
diff --git a/arch/arm/boot/dts/st/stm32mp13xc.dtsi b/arch/arm/boot/dts/st/stm32mp13xc.dtsi
index 4d00e7592882..b9fb071a1471 100644
--- a/arch/arm/boot/dts/st/stm32mp13xc.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp13xc.dtsi
@@ -4,15 +4,13 @@
* Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
*/
-/ {
- soc {
- cryp: crypto@54002000 {
- compatible = "st,stm32mp1-cryp";
- reg = <0x54002000 0x400>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc CRYP1>;
- resets = <&rcc CRYP1_R>;
- status = "disabled";
- };
+&etzpc {
+ cryp: crypto@54002000 {
+ compatible = "st,stm32mp1-cryp";
+ reg = <0x54002000 0x400>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CRYP1>;
+ resets = <&rcc CRYP1_R>;
+ status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/st/stm32mp13xf.dtsi b/arch/arm/boot/dts/st/stm32mp13xf.dtsi
index 4d00e7592882..b9fb071a1471 100644
--- a/arch/arm/boot/dts/st/stm32mp13xf.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp13xf.dtsi
@@ -4,15 +4,13 @@
* Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
*/
-/ {
- soc {
- cryp: crypto@54002000 {
- compatible = "st,stm32mp1-cryp";
- reg = <0x54002000 0x400>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc CRYP1>;
- resets = <&rcc CRYP1_R>;
- status = "disabled";
- };
+&etzpc {
+ cryp: crypto@54002000 {
+ compatible = "st,stm32mp1-cryp";
+ reg = <0x54002000 0x400>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CRYP1>;
+ resets = <&rcc CRYP1_R>;
+ status = "disabled";
};
};
--
2.35.3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-01-05 13:10 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-05 13:03 [PATCH v9 00/13] Introduce STM32 Firewall framework Gatien Chevallier
2024-01-05 13:03 ` Gatien Chevallier
2024-01-05 13:03 ` Gatien Chevallier
2024-01-05 13:03 ` [PATCH v9 01/13] dt-bindings: document generic access controllers Gatien Chevallier
2024-01-05 13:03 ` Gatien Chevallier
2024-01-05 13:03 ` [PATCH v9 02/13] dt-bindings: treewide: add access-controllers description Gatien Chevallier
2024-01-05 13:03 ` Gatien Chevallier
2024-01-05 13:03 ` Gatien Chevallier
2024-01-19 22:06 ` Rob Herring
2024-01-19 22:06 ` Rob Herring
2024-01-19 22:06 ` Rob Herring
2024-01-05 13:03 ` [PATCH v9 03/13] dt-bindings: bus: document RIFSC Gatien Chevallier
2024-01-05 13:03 ` Gatien Chevallier
2024-01-05 13:03 ` Gatien Chevallier
2024-01-05 13:03 ` [PATCH v9 04/13] dt-bindings: bus: document ETZPC Gatien Chevallier
2024-01-05 13:03 ` Gatien Chevallier
2024-01-05 13:03 ` Gatien Chevallier
2024-01-05 13:03 ` [PATCH v9 05/13] firewall: introduce stm32_firewall framework Gatien Chevallier
2024-01-05 13:03 ` Gatien Chevallier
2024-01-05 13:03 ` Gatien Chevallier
2024-01-05 13:03 ` [PATCH v9 06/13] of: property: fw_devlink: Add support for "access-controller" Gatien Chevallier
2024-01-05 13:03 ` Gatien Chevallier
2024-01-05 13:03 ` Gatien Chevallier
2024-04-24 5:57 ` Saravana Kannan
2024-04-24 5:57 ` Saravana Kannan
2024-04-24 5:57 ` Saravana Kannan
2024-04-24 12:19 ` Alexandre TORGUE
2024-04-24 12:19 ` Alexandre TORGUE
2024-04-24 12:19 ` Alexandre TORGUE
2024-01-05 13:03 ` [PATCH v9 07/13] bus: rifsc: introduce RIFSC firewall controller driver Gatien Chevallier
2024-01-05 13:03 ` Gatien Chevallier
2024-01-05 13:03 ` Gatien Chevallier
2024-01-05 13:03 ` [PATCH v9 08/13] arm64: dts: st: add RIFSC as an access controller for STM32MP25x boards Gatien Chevallier
2024-01-05 13:03 ` Gatien Chevallier
2024-01-05 13:03 ` Gatien Chevallier
2024-01-05 13:04 ` [PATCH v9 09/13] bus: etzpc: introduce ETZPC firewall controller driver Gatien Chevallier
2024-01-05 13:04 ` Gatien Chevallier
2024-01-05 13:04 ` Gatien Chevallier
2024-01-05 13:04 ` [PATCH v9 10/13] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards Gatien Chevallier
2024-01-05 13:04 ` Gatien Chevallier
2024-01-05 13:04 ` Gatien Chevallier
2024-01-05 13:04 ` [PATCH v9 11/13] ARM: dts: stm32: put ETZPC as an access controller " Gatien Chevallier
2024-01-05 13:04 ` Gatien Chevallier
2024-01-05 13:04 ` Gatien Chevallier
2024-01-05 13:04 ` Gatien Chevallier [this message]
2024-01-05 13:04 ` [PATCH v9 12/13] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards Gatien Chevallier
2024-01-05 13:04 ` Gatien Chevallier
2024-01-05 13:04 ` [PATCH v9 13/13] ARM: dts: stm32: put ETZPC as an access controller " Gatien Chevallier
2024-01-05 13:04 ` Gatien Chevallier
2024-01-05 13:04 ` Gatien Chevallier
2024-04-08 8:42 ` [PATCH v9 00/13] Introduce STM32 Firewall framework Alexandre TORGUE
2024-04-08 8:42 ` Alexandre TORGUE
2024-04-08 8:42 ` Alexandre TORGUE
2024-04-09 17:13 ` Rob Herring
2024-04-09 17:13 ` Rob Herring
2024-04-09 17:13 ` Rob Herring
2024-04-11 9:37 ` Alexandre TORGUE
2024-04-11 9:37 ` Alexandre TORGUE
2024-04-11 9:37 ` Alexandre TORGUE
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240105130404.301172-13-gatien.chevallier@foss.st.com \
--to=gatien.chevallier@foss.st.com \
--cc=Oleksii_Moisieiev@epam.com \
--cc=alexandre.torgue@foss.st.com \
--cc=alsa-devel@alsa-project.org \
--cc=andi.shyti@kernel.org \
--cc=arnaud.pouliquen@foss.st.com \
--cc=arnd@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=edumazet@google.com \
--cc=fabrice.gasnier@foss.st.com \
--cc=frowand.list@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=herbert@gondor.apana.org.au \
--cc=hugues.fruchet@foss.st.com \
--cc=jic23@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kuba@kernel.org \
--cc=lars@metafoo.de \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux-usb@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=mkl@pengutronix.de \
--cc=netdev@vger.kernel.org \
--cc=olivier.moysan@foss.st.com \
--cc=pabeni@redhat.com \
--cc=peng.fan@oss.nxp.com \
--cc=rcsekar@samsung.com \
--cc=richardcochran@gmail.com \
--cc=robh+dt@kernel.org \
--cc=ulf.hansson@linaro.org \
--cc=vkoul@kernel.org \
--cc=wg@grandegger.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.