All of lore.kernel.org
 help / color / mirror / Atom feed
From: tianyu2 <tianyu2@kernelsoft.com>
To: rafael@kernel.org, viresh.kumar@linaro.org, shawnguo@kernel.org,
	s.hauer@pengutronix.de
Cc: kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
	linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] cpufreq: imx6: use regmap to read ocotp register
Date: Tue,  9 Jan 2024 19:45:21 +0800	[thread overview]
Message-ID: <20240109114521.518195-1-tianyu2@kernelsoft.com> (raw)

Reading the ocotp register directly is unsafe and will cause the system
to hang if its clock is not turned on in CCM. The regmap interface has
clk enabled, which can solve this problem.

Signed-off-by: tianyu2 <tianyu2@kernelsoft.com>
---
 drivers/cpufreq/imx6q-cpufreq.c | 45 +++++++++++----------------------
 1 file changed, 15 insertions(+), 30 deletions(-)

diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
index 494d044b9e72..f18b9ee5e484 100644
--- a/drivers/cpufreq/imx6q-cpufreq.c
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -14,6 +14,8 @@
 #include <linux/pm_opp.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 
 #define PU_SOC_VOLTAGE_NORMAL	1250000
 #define PU_SOC_VOLTAGE_HIGH	1275000
@@ -225,8 +227,6 @@ static void imx6x_disable_freq_in_opp(struct device *dev, unsigned long freq)
 
 static int imx6q_opp_check_speed_grading(struct device *dev)
 {
-	struct device_node *np;
-	void __iomem *base;
 	u32 val;
 	int ret;
 
@@ -235,16 +235,11 @@ static int imx6q_opp_check_speed_grading(struct device *dev)
 		if (ret)
 			return ret;
 	} else {
-		np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ocotp");
-		if (!np)
-			return -ENOENT;
+		struct regmap *ocotp;
 
-		base = of_iomap(np, 0);
-		of_node_put(np);
-		if (!base) {
-			dev_err(dev, "failed to map ocotp\n");
-			return -EFAULT;
-		}
+		ocotp = syscon_regmap_lookup_by_compatible("fsl,imx6q-ocotp");
+		if (IS_ERR(ocotp))
+			return -ENOENT;
 
 		/*
 		 * SPEED_GRADING[1:0] defines the max speed of ARM:
@@ -254,8 +249,7 @@ static int imx6q_opp_check_speed_grading(struct device *dev)
 		 * 2b'00: 792000000Hz;
 		 * We need to set the max speed of ARM according to fuse map.
 		 */
-		val = readl_relaxed(base + OCOTP_CFG3);
-		iounmap(base);
+		regmap_read(ocotp, OCOTP_CFG3, &val);
 	}
 
 	val >>= OCOTP_CFG3_SPEED_SHIFT;
@@ -290,25 +284,16 @@ static int imx6ul_opp_check_speed_grading(struct device *dev)
 		if (ret)
 			return ret;
 	} else {
-		struct device_node *np;
-		void __iomem *base;
-
-		np = of_find_compatible_node(NULL, NULL, "fsl,imx6ul-ocotp");
-		if (!np)
-			np = of_find_compatible_node(NULL, NULL,
-						     "fsl,imx6ull-ocotp");
-		if (!np)
-			return -ENOENT;
+		struct regmap *ocotp;
 
-		base = of_iomap(np, 0);
-		of_node_put(np);
-		if (!base) {
-			dev_err(dev, "failed to map ocotp\n");
-			return -EFAULT;
-		}
+		ocotp = syscon_regmap_lookup_by_compatible("fsl,imx6ul-ocotp");
+		if (IS_ERR(ocotp))
+			ocotp = syscon_regmap_lookup_by_compatible("fsl,imx6ull-ocotp");
+
+		if (IS_ERR(ocotp))
+			return -ENOENT;
 
-		val = readl_relaxed(base + OCOTP_CFG3);
-		iounmap(base);
+		regmap_read(ocotp, OCOTP_CFG3, &val);
 	}
 
 	/*
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: tianyu2 <tianyu2@kernelsoft.com>
To: rafael@kernel.org, viresh.kumar@linaro.org, shawnguo@kernel.org,
	s.hauer@pengutronix.de
Cc: kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
	linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] cpufreq: imx6: use regmap to read ocotp register
Date: Tue,  9 Jan 2024 19:45:21 +0800	[thread overview]
Message-ID: <20240109114521.518195-1-tianyu2@kernelsoft.com> (raw)

Reading the ocotp register directly is unsafe and will cause the system
to hang if its clock is not turned on in CCM. The regmap interface has
clk enabled, which can solve this problem.

Signed-off-by: tianyu2 <tianyu2@kernelsoft.com>
---
 drivers/cpufreq/imx6q-cpufreq.c | 45 +++++++++++----------------------
 1 file changed, 15 insertions(+), 30 deletions(-)

diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
index 494d044b9e72..f18b9ee5e484 100644
--- a/drivers/cpufreq/imx6q-cpufreq.c
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -14,6 +14,8 @@
 #include <linux/pm_opp.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 
 #define PU_SOC_VOLTAGE_NORMAL	1250000
 #define PU_SOC_VOLTAGE_HIGH	1275000
@@ -225,8 +227,6 @@ static void imx6x_disable_freq_in_opp(struct device *dev, unsigned long freq)
 
 static int imx6q_opp_check_speed_grading(struct device *dev)
 {
-	struct device_node *np;
-	void __iomem *base;
 	u32 val;
 	int ret;
 
@@ -235,16 +235,11 @@ static int imx6q_opp_check_speed_grading(struct device *dev)
 		if (ret)
 			return ret;
 	} else {
-		np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ocotp");
-		if (!np)
-			return -ENOENT;
+		struct regmap *ocotp;
 
-		base = of_iomap(np, 0);
-		of_node_put(np);
-		if (!base) {
-			dev_err(dev, "failed to map ocotp\n");
-			return -EFAULT;
-		}
+		ocotp = syscon_regmap_lookup_by_compatible("fsl,imx6q-ocotp");
+		if (IS_ERR(ocotp))
+			return -ENOENT;
 
 		/*
 		 * SPEED_GRADING[1:0] defines the max speed of ARM:
@@ -254,8 +249,7 @@ static int imx6q_opp_check_speed_grading(struct device *dev)
 		 * 2b'00: 792000000Hz;
 		 * We need to set the max speed of ARM according to fuse map.
 		 */
-		val = readl_relaxed(base + OCOTP_CFG3);
-		iounmap(base);
+		regmap_read(ocotp, OCOTP_CFG3, &val);
 	}
 
 	val >>= OCOTP_CFG3_SPEED_SHIFT;
@@ -290,25 +284,16 @@ static int imx6ul_opp_check_speed_grading(struct device *dev)
 		if (ret)
 			return ret;
 	} else {
-		struct device_node *np;
-		void __iomem *base;
-
-		np = of_find_compatible_node(NULL, NULL, "fsl,imx6ul-ocotp");
-		if (!np)
-			np = of_find_compatible_node(NULL, NULL,
-						     "fsl,imx6ull-ocotp");
-		if (!np)
-			return -ENOENT;
+		struct regmap *ocotp;
 
-		base = of_iomap(np, 0);
-		of_node_put(np);
-		if (!base) {
-			dev_err(dev, "failed to map ocotp\n");
-			return -EFAULT;
-		}
+		ocotp = syscon_regmap_lookup_by_compatible("fsl,imx6ul-ocotp");
+		if (IS_ERR(ocotp))
+			ocotp = syscon_regmap_lookup_by_compatible("fsl,imx6ull-ocotp");
+
+		if (IS_ERR(ocotp))
+			return -ENOENT;
 
-		val = readl_relaxed(base + OCOTP_CFG3);
-		iounmap(base);
+		regmap_read(ocotp, OCOTP_CFG3, &val);
 	}
 
 	/*
-- 
2.25.1


             reply	other threads:[~2024-01-09 11:47 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-09 11:45 tianyu2 [this message]
2024-01-09 11:45 ` [PATCH] cpufreq: imx6: use regmap to read ocotp register tianyu2
2024-01-23  6:06 ` Viresh Kumar
2024-01-23  6:06   ` Viresh Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240109114521.518195-1-tianyu2@kernelsoft.com \
    --to=tianyu2@kernelsoft.com \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rafael@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.