[PATCH ndctl] test/daxctl-create.sh: remove region and dax device assumptions

[Vishal Verma <vishal.l.verma@intel.com>]

The daxctl-create.sh test had some hard-coded assumptions about what dax
device it expects to find, and what region number it will be under. This
usually worked when the unit test environment only had efi_fake_mem
devices as the sources of hmem memory. With CXL however, the region
numbering namespace is shared with CXL regions, often pushing the
efi_fake_mem region to something other than 'region0'.

Remove any region and device number assumptions from this test so it
works regardless of how regions get enumerated.

Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
---
 test/daxctl-create.sh | 62 +++++++++++++++++++++++++++++----------------------
 1 file changed, 35 insertions(+), 27 deletions(-)

diff --git a/test/daxctl-create.sh b/test/daxctl-create.sh
index d319a39..a5df6f2 100755
--- a/test/daxctl-create.sh
+++ b/test/daxctl-create.sh
@@ -29,14 +29,20 @@ find_testdev()
 	fi
 
 	# find a victim region provided by dax_hmem
-	testpath=$("$DAXCTL" list -r 0 | jq -er '.[0].path | .//""')
+	region_json="$("$DAXCTL" list -R)"
+	testpath=$(jq -er '.[0].path | .//""' <<< "$region_json")
 	if [[ ! "$testpath" == *"hmem"* ]]; then
 		printf "Unable to find a victim region\n"
 		exit "$rc"
 	fi
+	region_id=$(jq -er '.[0].id | .//""' <<< "$region_json")
+	if [[ ! "$region_id" ]]; then
+		printf "Unable to determine victim region id\n"
+		exit "$rc"
+	fi
 
 	# find a victim device
-	testdev=$("$DAXCTL" list -D -r 0 | jq -er '.[0].chardev | .//""')
+	testdev=$("$DAXCTL" list -D -r "$region_id" | jq -er '.[0].chardev | .//""')
 	if [[ ! $testdev  ]]; then
 		printf "Unable to find a victim device\n"
 		exit "$rc"
@@ -56,9 +62,10 @@ setup_dev()
 		exit "$rc"
 	fi
 
+	"$DAXCTL" reconfigure-device -m devdax -f "$testdev"
 	"$DAXCTL" disable-device "$testdev"
 	"$DAXCTL" reconfigure-device -s 0 "$testdev"
-	available=$("$DAXCTL" list -r 0 | jq -er '.[0].available_size | .//""')
+	available=$("$DAXCTL" list -r "$region_id" | jq -er '.[0].available_size | .//""')
 }
 
 reset_dev()
@@ -74,8 +81,8 @@ reset_dax()
 {
 	test -n "$testdev"
 
-	"$DAXCTL" disable-device -r 0 all
-	"$DAXCTL" destroy-device -r 0 all
+	"$DAXCTL" disable-device -r "$region_id" all
+	"$DAXCTL" destroy-device -r "$region_id" all
 	"$DAXCTL" reconfigure-device -s "$available" "$testdev"
 }
 
@@ -90,7 +97,7 @@ test_pass()
 	local rc=1
 
 	# Available size
-	_available_size=$("$DAXCTL" list -r 0 | jq -er '.[0].available_size | .//""')
+	_available_size=$("$DAXCTL" list -r "$region_id" | jq -er '.[0].available_size | .//""')
 	if [[ ! $_available_size == "$available" ]]; then
 		echo "Unexpected available size $_available_size != $available"
 		exit "$rc"
@@ -101,7 +108,7 @@ fail_if_available()
 {
 	local rc=1
 
-	_size=$("$DAXCTL" list -r 0 | jq -er '.[0].available_size | .//""')
+	_size=$("$DAXCTL" list -r "$region_id" | jq -er '.[0].available_size | .//""')
 	if [[ $_size ]]; then
 		echo "Unexpected available size $_size"
 		exit "$rc"
@@ -170,30 +177,31 @@ daxctl_test_multi()
 		"$DAXCTL" reconfigure-device -s $size "$testdev"
 	fi
 
-	daxdev_1=$("$DAXCTL" create-device -r 0 -s $size | jq -er '.[].chardev')
+	daxdev_1=$("$DAXCTL" create-device -r "$region_id" -s $size | jq -er '.[].chardev')
 	test -n "$daxdev_1"
 
-	daxdev_2=$("$DAXCTL" create-device -r 0 -s $size | jq -er '.[].chardev')
+	daxdev_2=$("$DAXCTL" create-device -r "$region_id" -s $size | jq -er '.[].chardev')
 	test -n "$daxdev_2"
 
 	if [[ ! $2 ]]; then
-		daxdev_3=$("$DAXCTL" create-device -r 0 -s $size | jq -er '.[].chardev')
+		daxdev_3=$("$DAXCTL" create-device -r "$region_id" -s $size | jq -er '.[].chardev')
 		test -n "$daxdev_3"
 	fi
 
 	# Hole
-	"$DAXCTL" disable-device  "$1" && "$DAXCTL" destroy-device "$1"
+	"$DAXCTL" disable-device  "$1"
+	"$DAXCTL" destroy-device "$1"
 
 	# Pick space in the created hole and at the end
 	new_size=$((size * 2))
-	daxdev_4=$("$DAXCTL" create-device -r 0 -s "$new_size" | jq -er '.[].chardev')
+	daxdev_4=$("$DAXCTL" create-device -r "$region_id" -s "$new_size" | jq -er '.[].chardev')
 	test -n "$daxdev_4"
 	test "$(daxctl_get_nr_mappings "$daxdev_4")" -eq 2
 
 	fail_if_available
 
-	"$DAXCTL" disable-device -r 0 all
-	"$DAXCTL" destroy-device -r 0 all
+	"$DAXCTL" disable-device -r "$region_id" all
+	"$DAXCTL" destroy-device -r "$region_id" all
 }
 
 daxctl_test_multi_reconfig()
@@ -210,7 +218,7 @@ daxctl_test_multi_reconfig()
 	"$DAXCTL" reconfigure-device -s $size "$testdev"
 	"$DAXCTL" disable-device "$testdev"
 
-	daxdev_1=$("$DAXCTL" create-device -r 0 -s $size | jq -er '.[].chardev')
+	daxdev_1=$("$DAXCTL" create-device -r "$region_id" -s $size | jq -er '.[].chardev')
 	"$DAXCTL" disable-device "$daxdev_1"
 
 	start=$((size + size))
@@ -249,16 +257,16 @@ daxctl_test_adjust()
 	start=$((size + size))
 	for i in $(seq 1 1 $ncfgs)
 	do
-		daxdev=$("$DAXCTL" create-device -r 0 -s "$size" | jq -er '.[].chardev')
+		daxdev=$("$DAXCTL" create-device -r "$region_id" -s "$size" | jq -er '.[].chardev')
 		test "$(daxctl_get_nr_mappings "$daxdev")" -eq 1
 	done
 
-	daxdev=$(daxctl_get_dev "dax0.1")
+	daxdev=$(daxctl_get_dev "dax$region_id.1")
 	"$DAXCTL" disable-device "$daxdev" && "$DAXCTL" destroy-device "$daxdev"
-	daxdev=$(daxctl_get_dev "dax0.4")
+	daxdev=$(daxctl_get_dev "dax$region_id.4")
 	"$DAXCTL" disable-device "$daxdev" && "$DAXCTL" destroy-device "$daxdev"
 
-	daxdev=$(daxctl_get_dev "dax0.2")
+	daxdev=$(daxctl_get_dev "dax$region_id.2")
 	"$DAXCTL" disable-device "$daxdev"
 	"$DAXCTL" reconfigure-device -s $((size * 2)) "$daxdev"
 	# Allocates space at the beginning: expect two mappings as
@@ -266,7 +274,7 @@ daxctl_test_adjust()
 	# preserve the relative page_offset of existing allocations
 	test "$(daxctl_get_nr_mappings "$daxdev")" -eq 2
 
-	daxdev=$(daxctl_get_dev "dax0.3")
+	daxdev=$(daxctl_get_dev "dax$region_id.3")
 	"$DAXCTL" disable-device "$daxdev"
 	"$DAXCTL" reconfigure-device -s $((size * 2)) "$daxdev"
 	# Adjusts space at the end, expect one mapping because we are
@@ -275,9 +283,9 @@ daxctl_test_adjust()
 
 	fail_if_available
 
-	daxdev=$(daxctl_get_dev "dax0.3")
+	daxdev=$(daxctl_get_dev "dax$region_id.3")
 	"$DAXCTL" disable-device "$daxdev" && "$DAXCTL" destroy-device "$daxdev"
-	daxdev=$(daxctl_get_dev "dax0.2")
+	daxdev=$(daxctl_get_dev "dax$region_id.2")
 	"$DAXCTL" disable-device "$daxdev" && "$DAXCTL" destroy-device "$daxdev"
 }
 
@@ -295,7 +303,7 @@ daxctl_test1()
 {
 	local daxdev
 
-	daxdev=$("$DAXCTL" create-device -r 0 | jq -er '.[].chardev')
+	daxdev=$("$DAXCTL" create-device -r "$region_id" | jq -er '.[].chardev')
 
 	test -n "$daxdev"
 	test "$(daxctl_get_nr_mappings "$daxdev")" -eq 1
@@ -312,17 +320,17 @@ daxctl_test1()
 # having the region device reconfigured with some of the memory.
 daxctl_test2()
 {
-	daxctl_test_multi "dax0.1" 1
+	daxctl_test_multi "$region_id.1" 1
 	clear_dev
 	test_pass
 }
 
 # Test 3: space at the beginning and at the end
 # Successfully pick space in the beginning and space at the end, by
-# having the region device emptied (so region beginning starts with dax0.1).
+# having the region device emptied (so region beginning starts with daxX.1).
 daxctl_test3()
 {
-	daxctl_test_multi "dax0.1"
+	daxctl_test_multi "$region_id.1"
 	clear_dev
 	test_pass
 }
@@ -366,7 +374,7 @@ daxctl_test6()
 		size=$align
 	fi
 
-	daxdev=$("$DAXCTL" create-device -r 0 -s $size -a $align | jq -er '.[].chardev')
+	daxdev=$("$DAXCTL" create-device -r "$region_id" -s $size -a $align | jq -er '.[].chardev')
 
 	test -n "$daxdev"
 

---
base-commit: 14b4c6f9116b1c7a32e0e83d7b201b78de3fa02f
change-id: 20240110-vv-daxctl-create-c6a7e1908296

Best regards,
-- 
Vishal Verma <vishal.l.verma@intel.com>