All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nicolas Pitre <nico@fluxnic.net>
To: Daniel Lezcano <daniel.lezcano@linaro.org>, linux-pm@vger.kernel.org
Cc: Nicolas Pitre <npitre@baylibre.com>
Subject: [PATCH 9/9] thermal/drivers/mediatek/lvts_thermal: add MT8188 support
Date: Thu, 11 Jan 2024 17:30:06 -0500	[thread overview]
Message-ID: <20240111223020.3593558-10-nico@fluxnic.net> (raw)
In-Reply-To: <20240111223020.3593558-1-nico@fluxnic.net>

From: Nicolas Pitre <npitre@baylibre.com>

Various values extracted from the vendor's kernel driver.

Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
---
 .../thermal/mediatek,lvts-thermal.yaml        |   4 +
 drivers/thermal/mediatek/lvts_thermal.c       | 101 ++++++++++++++++++
 .../thermal/mediatek,lvts-thermal.h           |  16 +++
 3 files changed, 121 insertions(+)

diff --git a/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
index 4173bae530..331cf4e662 100644
--- a/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
@@ -20,6 +20,8 @@ properties:
     enum:
       - mediatek,mt7988-lvts-ap
       - mediatek,mt8186-lvts
+      - mediatek,mt8188-lvts-ap
+      - mediatek,mt8188-lvts-mcu
       - mediatek,mt8192-lvts-ap
       - mediatek,mt8192-lvts-mcu
       - mediatek,mt8195-lvts-ap
@@ -61,6 +63,8 @@ allOf:
         compatible:
           contains:
             enum:
+              - mediatek,mt8188-lvts-ap
+              - mediatek,mt8188-lvts-mcu
               - mediatek,mt8192-lvts-ap
               - mediatek,mt8192-lvts-mcu
     then:
diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index 473ef91ea3..8942b50d84 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -1441,6 +1441,89 @@ static const struct lvts_ctrl_data mt8186_lvts_data_ctrl[] = {
 	}
 };
 
+static const struct lvts_ctrl_data mt8188_lvts_mcu_data_ctrl[] = {
+	{
+		.lvts_sensor = {
+			{ .dt_id = MT8188_MCU_TS1_0,
+			  .cal_offsets = { 22, 23, 24 } },
+			{ .dt_id = MT8188_MCU_TS1_1,
+			  .cal_offsets = { 25, 26, 27 } },
+			{ .dt_id = MT8188_MCU_TS1_2,
+			  .cal_offsets = { 28, 29, 30 } },
+			{ .dt_id = MT8188_MCU_TS1_3,
+			  .cal_offsets = { 31, 32, 33 } },
+		},
+		.num_lvts_sensor = 4,
+		.offset = 0x0,
+		.hw_tshut_temp = 117000,
+		.mode = LVTS_MSR_FILTERED_MODE,
+	},
+	{
+		.lvts_sensor = {
+			{ .dt_id = MT8188_MCU_TS2_0,
+			  .cal_offsets = { 34, 35, 36 } },
+			{ .dt_id = MT8188_MCU_TS2_1,
+			  .cal_offsets = { 37, 38, 39 } },
+		},
+		.num_lvts_sensor = 2,
+		.offset = 0x100,
+		.hw_tshut_temp = 117000,
+		.mode = LVTS_MSR_FILTERED_MODE,
+	}
+};
+
+static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
+	{
+		.lvts_sensor = {
+			{ .dt_id = MT8188_AP_TS3_1,
+			  .cal_offsets = { 40, 41, 42 } },
+		},
+		.num_lvts_sensor = 1,
+		.skipped_sensors = 1,
+		.offset = 0x0,
+		.hw_tshut_temp = 117000,
+		.mode = LVTS_MSR_FILTERED_MODE,
+	},
+	{
+		.lvts_sensor = {
+			{ .dt_id = MT8188_AP_TS4_0,
+			  .cal_offsets = { 43, 44, 45 } },
+			{ .dt_id = MT8188_AP_TS4_1,
+			  .cal_offsets = { 46, 47, 48 } },
+			{ .dt_id = MT8188_AP_TS4_2,
+			  .cal_offsets = { 49, 50, 51 } },
+		},
+		.num_lvts_sensor = 3,
+		.offset = 0x100,
+		.hw_tshut_temp = 117000,
+		.mode = LVTS_MSR_FILTERED_MODE,
+	},
+	{
+		.lvts_sensor = {
+			{ .dt_id = MT8188_AP_TS5_0,
+			  .cal_offsets = { 52, 53, 54 } },
+			{ .dt_id = MT8188_AP_TS5_1,
+			  .cal_offsets = { 55, 56, 57 } },
+		},
+		.num_lvts_sensor = 2,
+		.offset = 0x200,
+		.hw_tshut_temp = 117000,
+		.mode = LVTS_MSR_FILTERED_MODE,
+	},
+	{
+		.lvts_sensor = {
+			{ .dt_id = MT8188_AP_TS6_0,
+			  .cal_offsets = { 58, 59, 60 } },
+			{ .dt_id = MT8188_AP_TS6_1,
+			  .cal_offsets = { 61, 62, 63 } },
+		},
+		.num_lvts_sensor = 2,
+		.offset = 0x300,
+		.hw_tshut_temp = 117000,
+		.mode = LVTS_MSR_FILTERED_MODE,
+	}
+};
+
 static const struct lvts_ctrl_data mt8192_lvts_mcu_data_ctrl[] = {
 	{
 		.lvts_sensor = {
@@ -1638,6 +1721,22 @@ static const struct lvts_data mt8186_lvts_data = {
 	.gt_calib_bit_offset = 24,
 };
 
+static const struct lvts_data mt8188_lvts_mcu_data = {
+	.lvts_ctrl	= mt8188_lvts_mcu_data_ctrl,
+	.num_lvts_ctrl	= ARRAY_SIZE(mt8188_lvts_mcu_data_ctrl),
+	.temp_factor	= -250460,
+	.temp_offset	= 250460,
+	.gt_calib_bit_offset = 20,
+};
+
+static const struct lvts_data mt8188_lvts_ap_data = {
+	.lvts_ctrl	= mt8188_lvts_ap_data_ctrl,
+	.num_lvts_ctrl	= ARRAY_SIZE(mt8188_lvts_ap_data_ctrl),
+	.temp_factor	= -250460,
+	.temp_offset	= 250460,
+	.gt_calib_bit_offset = 20,
+};
+
 static const struct lvts_data mt8192_lvts_mcu_data = {
 	.lvts_ctrl	= mt8192_lvts_mcu_data_ctrl,
 	.num_lvts_ctrl	= ARRAY_SIZE(mt8192_lvts_mcu_data_ctrl),
@@ -1669,6 +1768,8 @@ static const struct lvts_data mt8195_lvts_ap_data = {
 static const struct of_device_id lvts_of_match[] = {
 	{ .compatible = "mediatek,mt7988-lvts-ap", .data = &mt7988_lvts_ap_data },
 	{ .compatible = "mediatek,mt8186-lvts", .data = &mt8186_lvts_data },
+	{ .compatible = "mediatek,mt8188-lvts-mcu", .data = &mt8188_lvts_mcu_data },
+	{ .compatible = "mediatek,mt8188-lvts-ap", .data = &mt8188_lvts_ap_data },
 	{ .compatible = "mediatek,mt8192-lvts-mcu", .data = &mt8192_lvts_mcu_data },
 	{ .compatible = "mediatek,mt8192-lvts-ap", .data = &mt8192_lvts_ap_data },
 	{ .compatible = "mediatek,mt8195-lvts-mcu", .data = &mt8195_lvts_mcu_data },
diff --git a/include/dt-bindings/thermal/mediatek,lvts-thermal.h b/include/dt-bindings/thermal/mediatek,lvts-thermal.h
index 3197ca6087..04fa9d7821 100644
--- a/include/dt-bindings/thermal/mediatek,lvts-thermal.h
+++ b/include/dt-bindings/thermal/mediatek,lvts-thermal.h
@@ -26,6 +26,22 @@
 #define MT8186_TS3_1		7
 #define MT8186_TS3_2		8
 
+#define MT8188_MCU_TS1_0	0
+#define MT8188_MCU_TS1_1	1
+#define MT8188_MCU_TS1_2	2
+#define MT8188_MCU_TS1_3	3
+#define MT8188_MCU_TS2_0	4
+#define MT8188_MCU_TS2_1	5
+
+#define MT8188_AP_TS3_1		0
+#define MT8188_AP_TS4_0		1
+#define MT8188_AP_TS4_1		2
+#define MT8188_AP_TS4_2		3
+#define MT8188_AP_TS5_0		4
+#define MT8188_AP_TS5_1		5
+#define MT8188_AP_TS6_0		6
+#define MT8188_AP_TS6_1		7
+
 #define MT8195_MCU_BIG_CPU0     0
 #define MT8195_MCU_BIG_CPU1     1
 #define MT8195_MCU_BIG_CPU2     2
-- 
2.42.0


      parent reply	other threads:[~2024-01-11 22:30 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-11 22:29 [PATCH 0/9] Mediatek thermal sensor driver support for MT8186 and MT8188 Nicolas Pitre
2024-01-11 22:29 ` [PATCH 1/9] thermal/drivers/mediatek/lvts_thermal: retrieve all calibration bytes Nicolas Pitre
2024-01-11 22:29 ` [PATCH 2/9] thermal/drivers/mediatek/lvts_thermal: move comment Nicolas Pitre
2024-01-11 22:30 ` [PATCH 3/9] thermal/drivers/mediatek/lvts_thermal: use offsets for every calibration byte Nicolas Pitre
2024-01-11 22:30 ` [PATCH 4/9] thermal/drivers/mediatek/lvts_thermal: guard against efuse data buffer overflow Nicolas Pitre
2024-01-11 22:30 ` [PATCH 5/9] thermal/drivers/mediatek/lvts_thermal: add MT8186 support Nicolas Pitre
2024-01-11 22:30 ` [PATCH 6/9] arm64: dts: mediatek: mt8186: add default thermal zones Nicolas Pitre
2024-01-12 11:21   ` Krzysztof Kozlowski
2024-01-12 16:52     ` Nicolas Pitre
2024-01-15 17:46     ` Nicolas Pitre
2024-01-15 17:52       ` Krzysztof Kozlowski
2024-01-19 17:04         ` Daniel Lezcano
2024-01-11 22:30 ` [PATCH 7/9] thermal/drivers/mediatek/lvts_thermal: provision for gt variable location Nicolas Pitre
2024-01-11 22:30 ` [PATCH 8/9] thermal/drivers/mediatek/lvts_thermal: allow early empty sensor slots Nicolas Pitre
2024-01-19 16:29   ` Daniel Lezcano
2024-01-19 16:53     ` Nicolas Pitre
2024-01-22 11:55       ` Daniel Lezcano
2024-01-22 15:23         ` Nicolas Pitre
2024-01-22 16:03           ` Daniel Lezcano
2024-01-22 16:13             ` Nicolas Pitre
2024-01-11 22:30 ` Nicolas Pitre [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240111223020.3593558-10-nico@fluxnic.net \
    --to=nico@fluxnic.net \
    --cc=daniel.lezcano@linaro.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=npitre@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.