All of lore.kernel.org
 help / color / mirror / Atom feed
From: Muhammad Usama Anjum <usama.anjum@collabora.com>
To: Andrew Morton <akpm@linux-foundation.org>,
	Shuah Khan <shuah@kernel.org>,
	"Joel Fernandes (Google)" <joel@joelfernandes.org>,
	Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>,
	kernel@collabora.com, linux-mm@kvack.org,
	linux-kselftest@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2] selftests/mm: mremap_test: fix build warning
Date: Fri, 12 Jan 2024 12:18:50 +0500	[thread overview]
Message-ID: <20240112071851.612930-1-usama.anjum@collabora.com> (raw)

Use 2 separate variables of types int and unsigned long long instead of
confusing them. This corrects the correct print format for each of them
and removes the build warning:

warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘long long unsigned int’

Fixes: a4cb3b243343 ("selftests: mm: add a test for remapping to area immediately after existing mapping")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
---
Changes since v1:
- Don't just fix the print format, instead use different variables
---
 tools/testing/selftests/mm/mremap_test.c | 27 ++++++++++++------------
 1 file changed, 14 insertions(+), 13 deletions(-)

diff --git a/tools/testing/selftests/mm/mremap_test.c b/tools/testing/selftests/mm/mremap_test.c
index 1d4c1589c305..2f8b991f78cb 100644
--- a/tools/testing/selftests/mm/mremap_test.c
+++ b/tools/testing/selftests/mm/mremap_test.c
@@ -360,7 +360,8 @@ static long long remap_region(struct config c, unsigned int threshold_mb,
 			      char pattern_seed)
 {
 	void *addr, *src_addr, *dest_addr, *dest_preamble_addr;
-	unsigned long long i;
+	int d;
+	unsigned long long t;
 	struct timespec t_start = {0, 0}, t_end = {0, 0};
 	long long  start_ns, end_ns, align_mask, ret, offset;
 	unsigned long long threshold;
@@ -378,8 +379,8 @@ static long long remap_region(struct config c, unsigned int threshold_mb,
 
 	/* Set byte pattern for source block. */
 	srand(pattern_seed);
-	for (i = 0; i < threshold; i++)
-		memset((char *) src_addr + i, (char) rand(), 1);
+	for (t = 0; t < threshold; t++)
+		memset((char *) src_addr + t, (char) rand(), 1);
 
 	/* Mask to zero out lower bits of address for alignment */
 	align_mask = ~(c.dest_alignment - 1);
@@ -420,8 +421,8 @@ static long long remap_region(struct config c, unsigned int threshold_mb,
 
 		/* Set byte pattern for the dest preamble block. */
 		srand(pattern_seed);
-		for (i = 0; i < c.dest_preamble_size; i++)
-			memset((char *) dest_preamble_addr + i, (char) rand(), 1);
+		for (d = 0; d < c.dest_preamble_size; d++)
+			memset((char *) dest_preamble_addr + d, (char) rand(), 1);
 	}
 
 	clock_gettime(CLOCK_MONOTONIC, &t_start);
@@ -437,14 +438,14 @@ static long long remap_region(struct config c, unsigned int threshold_mb,
 
 	/* Verify byte pattern after remapping */
 	srand(pattern_seed);
-	for (i = 0; i < threshold; i++) {
+	for (t = 0; t < threshold; t++) {
 		char c = (char) rand();
 
-		if (((char *) dest_addr)[i] != c) {
+		if (((char *) dest_addr)[t] != c) {
 			ksft_print_msg("Data after remap doesn't match at offset %llu\n",
-				       i);
+				       t);
 			ksft_print_msg("Expected: %#x\t Got: %#x\n", c & 0xff,
-					((char *) dest_addr)[i] & 0xff);
+					((char *) dest_addr)[t] & 0xff);
 			ret = -1;
 			goto clean_up_dest;
 		}
@@ -453,14 +454,14 @@ static long long remap_region(struct config c, unsigned int threshold_mb,
 	/* Verify the dest preamble byte pattern after remapping */
 	if (c.dest_preamble_size) {
 		srand(pattern_seed);
-		for (i = 0; i < c.dest_preamble_size; i++) {
+		for (d = 0; d < c.dest_preamble_size; d++) {
 			char c = (char) rand();
 
-			if (((char *) dest_preamble_addr)[i] != c) {
+			if (((char *) dest_preamble_addr)[d] != c) {
 				ksft_print_msg("Preamble data after remap doesn't match at offset %d\n",
-					       i);
+					       d);
 				ksft_print_msg("Expected: %#x\t Got: %#x\n", c & 0xff,
-					       ((char *) dest_preamble_addr)[i] & 0xff);
+					       ((char *) dest_preamble_addr)[d] & 0xff);
 				ret = -1;
 				goto clean_up_dest;
 			}
-- 
2.42.0


                 reply	other threads:[~2024-01-12  7:18 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240112071851.612930-1-usama.anjum@collabora.com \
    --to=usama.anjum@collabora.com \
    --cc=akpm@linux-foundation.org \
    --cc=joel@joelfernandes.org \
    --cc=kernel@collabora.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=lstoakes@gmail.com \
    --cc=shuah@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.