All of lore.kernel.org
 help / color / mirror / Atom feed
From: Biju Das <biju.das.jz@bp.renesas.com>
To: Mauro Carvalho Chehab <mchehab@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: Biju Das <biju.das.jz@bp.renesas.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Magnus Damm <magnus.damm@gmail.com>,
	Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
	linux-media@vger.kernel.org, devicetree@vger.kernel.org,
	linux-renesas-soc@vger.kernel.org,
	Biju Das <biju.das.au@gmail.com>
Subject: [PATCH 2/5] media: dt-bindings: renesas,rzg2l-cru: Document Renesas RZ/G2UL CRU block
Date: Tue, 23 Jan 2024 12:17:17 +0000	[thread overview]
Message-ID: <20240123121720.294753-3-biju.das.jz@bp.renesas.com> (raw)
In-Reply-To: <20240123121720.294753-1-biju.das.jz@bp.renesas.com>

Document the CRU IP found in Renesas RZ/G2UL SoC.

The CRU block on the RZ/G2UL SoC is identical to one found on the
RZ/G2L SoC, but it does not support parallel input.

No driver changes are required as generic compatible string
"renesas,rzg2l-cru" will be used as a fallback on RZ/G2UL SoC.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 .../bindings/media/renesas,rzg2l-cru.yaml     | 43 +++++++++++++++++--
 1 file changed, 39 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
index 1e72b8808d24..7015a01fc1bc 100644
--- a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
@@ -19,6 +19,7 @@ properties:
   compatible:
     items:
       - enum:
+          - renesas,r9a07g043-cru       # RZ/G2UL
           - renesas,r9a07g044-cru       # RZ/G2{L,LC}
           - renesas,r9a07g054-cru       # RZ/V2L
       - const: renesas,rzg2l-cru
@@ -87,10 +88,6 @@ properties:
           Input port node, describing the Image Processing module connected to the
           CSI-2 receiver.
 
-    required:
-      - port@0
-      - port@1
-
 required:
   - compatible
   - reg
@@ -102,6 +99,44 @@ required:
   - reset-names
   - power-domains
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,r9a07g044-cru
+              - renesas,r9a07g054-cru
+    then:
+      properties:
+        ports:
+          properties:
+            port@0:
+              description: Parallel input
+            port@1:
+              description: CSI
+
+          required:
+            - port@0
+            - port@1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,r9a07g043-cru
+    then:
+      properties:
+        ports:
+          properties:
+            port@0: false
+            port@1:
+              description: CSI-2
+
+          required:
+            - port@1
+
 additionalProperties: false
 
 examples:
-- 
2.25.1


  parent reply	other threads:[~2024-01-23 12:17 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-23 12:17 [PATCH 0/5] Add RZ/G2UL CRU and CSI support Biju Das
2024-01-23 12:17 ` [PATCH 1/5] media: dt-bindings: renesas,rzg2l-csi2: Document Renesas RZ/G2UL CSI-2 block Biju Das
2024-01-24 17:49   ` Conor Dooley
2024-01-25 14:17     ` Biju Das
2024-01-23 12:17 ` Biju Das [this message]
2024-01-24 17:48   ` [PATCH 2/5] media: dt-bindings: renesas,rzg2l-cru: Document Renesas RZ/G2UL CRU block Conor Dooley
2024-01-25 14:34     ` Biju Das
2024-01-23 12:17 ` [PATCH 3/5] arm64: dts: renesas: r9a07g043u: Add CSI and CRU nodes Biju Das
2024-01-23 12:17 ` [PATCH 4/5] arm64: dts: renesas: rzg2ul-smarc: Enable CRU, CSI support Biju Das
2024-01-23 12:17 ` [PATCH 5/5] arm64: dts: renesas: r9a07g043u11-smarc-cru-csi-ov5645: Reduce I2C frequency Biju Das

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240123121720.294753-3-biju.das.jz@bp.renesas.com \
    --to=biju.das.jz@bp.renesas.com \
    --cc=biju.das.au@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=mchehab@kernel.org \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.