From: "Duje Mihanović" <duje.mihanovic@skole.hr> To: Lee Jones <lee@kernel.org>, Daniel Thompson <daniel.thompson@linaro.org>, Jingoo Han <jingoohan1@gmail.com>, Pavel Machek <pavel@ucw.cz>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Helge Deller <deller@gmx.de>, Linus Walleij <linus.walleij@linaro.org> Cc: "Karel Balej" <balejk@matfyz.cz>, ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-leds@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-fbdev@vger.kernel.org, "Duje Mihanović" <duje.mihanovic@skole.hr> Subject: [PATCH v5 4/4] backlight: Add Kinetic KTD2801 backlight support Date: Thu, 25 Jan 2024 16:30:56 +0100 [thread overview] Message-ID: <20240125-ktd2801-v5-4-e22da232a825@skole.hr> (raw) In-Reply-To: <20240125-ktd2801-v5-0-e22da232a825@skole.hr> KTD2801 is a LED backlight driver IC found in samsung,coreprimevelte. The brightness can be set using PWM or the ExpressWire protocol. Add support for the KTD2801. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> --- MAINTAINERS | 6 ++ drivers/video/backlight/Kconfig | 7 ++ drivers/video/backlight/Makefile | 1 + drivers/video/backlight/ktd2801-backlight.c | 128 ++++++++++++++++++++++++++++ 4 files changed, 142 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index e1c83e0e837a..01cd1a460907 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12052,6 +12052,12 @@ S: Maintained F: Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml F: drivers/video/backlight/ktd253-backlight.c +KTD2801 BACKLIGHT DRIVER +M: Duje Mihanović <duje.mihanovic@skole.hr> +S: Maintained +F: Documentation/devicetree/bindings/leds/backlight/kinetic,ktd2801.yaml +F: drivers/video/backlight/ktd2801-backlight.c + KTEST M: Steven Rostedt <rostedt@goodmis.org> M: John Hawley <warthog9@eaglescrag.net> diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index ea2d0d69bd8c..230bca07b09d 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -183,6 +183,13 @@ config BACKLIGHT_KTD253 which is a 1-wire GPIO-controlled backlight found in some mobile phones. +config BACKLIGHT_KTD2801 + tristate "Backlight Driver for Kinetic KTD2801" + select LEDS_EXPRESSWIRE + help + Say Y to enable the backlight driver for the Kinetic KTD2801 1-wire + GPIO-controlled backlight found in Samsung Galaxy Core Prime VE LTE. + config BACKLIGHT_KTZ8866 tristate "Backlight Driver for Kinetic KTZ8866" depends on I2C diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index 06966cb20459..8d2cb252042d 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o obj-$(CONFIG_BACKLIGHT_HP700) += jornada720_bl.o obj-$(CONFIG_BACKLIGHT_IPAQ_MICRO) += ipaq_micro_bl.o obj-$(CONFIG_BACKLIGHT_KTD253) += ktd253-backlight.o +obj-$(CONFIG_BACKLIGHT_KTD2801) += ktd2801-backlight.o obj-$(CONFIG_BACKLIGHT_KTZ8866) += ktz8866.o obj-$(CONFIG_BACKLIGHT_LM3533) += lm3533_bl.o obj-$(CONFIG_BACKLIGHT_LM3630A) += lm3630a_bl.o diff --git a/drivers/video/backlight/ktd2801-backlight.c b/drivers/video/backlight/ktd2801-backlight.c new file mode 100644 index 000000000000..c020acff40f1 --- /dev/null +++ b/drivers/video/backlight/ktd2801-backlight.c @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Datasheet: + * https://www.kinet-ic.com/uploads/web/KTD2801/KTD2801-04b.pdf + */ +#include <linux/backlight.h> +#include <linux/gpio/consumer.h> +#include <linux/leds-expresswire.h> +#include <linux/platform_device.h> +#include <linux/property.h> + +#define KTD2801_DEFAULT_BRIGHTNESS 100 +#define KTD2801_MAX_BRIGHTNESS 255 + +/* These values have been extracted from Samsung's driver. */ +const struct expresswire_timing ktd2801_timing = { + .poweroff_us = 2600, + .detect_delay_us = 150, + .detect_us = 270, + .data_start_us = 5, + .short_bitset_us = 5, + .long_bitset_us = 15, + .end_of_data_low_us = 10, + .end_of_data_high_us = 350 +}; + +struct ktd2801_backlight { + struct expresswire_common_props props; + struct backlight_device *bd; + bool was_on; +}; + +static int ktd2801_update_status(struct backlight_device *bd) +{ + struct ktd2801_backlight *ktd2801 = bl_get_data(bd); + u8 brightness = (u8) backlight_get_brightness(bd); + + if (backlight_is_blank(bd)) { + expresswire_power_off(&ktd2801->props); + ktd2801->was_on = false; + return 0; + } + + if (!ktd2801->was_on) { + expresswire_enable(&ktd2801->props); + ktd2801->was_on = true; + } + + expresswire_write_u8(&ktd2801->props, brightness); + + return 0; +} + +static const struct backlight_ops ktd2801_backlight_ops = { + .update_status = ktd2801_update_status, +}; + +static int ktd2801_backlight_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct backlight_device *bd; + struct ktd2801_backlight *ktd2801; + u32 brightness, max_brightness; + int ret; + + ktd2801 = devm_kzalloc(dev, sizeof(*ktd2801), GFP_KERNEL); + if (!ktd2801) + return -ENOMEM; + ktd2801->was_on = true; + ktd2801->props.timing = ktd2801_timing; + + ret = device_property_read_u32(dev, "max-brightness", &max_brightness); + if (ret) + max_brightness = KTD2801_MAX_BRIGHTNESS; + if (max_brightness > KTD2801_MAX_BRIGHTNESS) { + dev_err(dev, "illegal max brightness specified\n"); + max_brightness = KTD2801_MAX_BRIGHTNESS; + } + + ret = device_property_read_u32(dev, "default-brightness", &brightness); + if (ret) + brightness = KTD2801_DEFAULT_BRIGHTNESS; + if (brightness > max_brightness) { + dev_err(dev, "default brightness exceeds max\n"); + brightness = max_brightness; + } + + ktd2801->props.ctrl_gpio = devm_gpiod_get(dev, "ctrl", GPIOD_OUT_HIGH); + if (IS_ERR(ktd2801->props.ctrl_gpio)) + return dev_err_probe(dev, PTR_ERR(ktd2801->props.ctrl_gpio), + "failed to get backlight GPIO"); + gpiod_set_consumer_name(ktd2801->props.ctrl_gpio, dev_name(dev)); + + bd = devm_backlight_device_register(dev, dev_name(dev), dev, ktd2801, + &ktd2801_backlight_ops, NULL); + if (IS_ERR(bd)) + return dev_err_probe(dev, PTR_ERR(bd), + "failed to register backlight"); + + bd->props.max_brightness = max_brightness; + bd->props.brightness = brightness; + + ktd2801->bd = bd; + platform_set_drvdata(pdev, bd); + backlight_update_status(bd); + + return 0; +} + +static const struct of_device_id ktd2801_of_match[] = { + { .compatible = "kinetic,ktd2801" }, + { } +}; +MODULE_DEVICE_TABLE(of, ktd2801_of_match); + +static struct platform_driver ktd2801_backlight_driver = { + .driver = { + .name = "ktd2801-backlight", + .of_match_table = ktd2801_of_match, + }, + .probe = ktd2801_backlight_probe, +}; +module_platform_driver(ktd2801_backlight_driver); + +MODULE_IMPORT_NS(EXPRESSWIRE); +MODULE_AUTHOR("Duje Mihanović <duje.mihanovic@skole.hr>"); +MODULE_DESCRIPTION("Kinetic KTD2801 Backlight Driver"); +MODULE_LICENSE("GPL"); -- 2.43.0
WARNING: multiple messages have this Message-ID (diff)
From: "Duje Mihanović" <duje.mihanovic@skole.hr> To: Lee Jones <lee@kernel.org>, Daniel Thompson <daniel.thompson@linaro.org>, Jingoo Han <jingoohan1@gmail.com>, Pavel Machek <pavel@ucw.cz>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Helge Deller <deller@gmx.de>, Linus Walleij <linus.walleij@linaro.org> Cc: devicetree@vger.kernel.org, linux-fbdev@vger.kernel.org, "Duje Mihanović" <duje.mihanovic@skole.hr>, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org, "Karel Balej" <balejk@matfyz.cz>, linux-leds@vger.kernel.org Subject: [PATCH v5 4/4] backlight: Add Kinetic KTD2801 backlight support Date: Thu, 25 Jan 2024 16:30:56 +0100 [thread overview] Message-ID: <20240125-ktd2801-v5-4-e22da232a825@skole.hr> (raw) In-Reply-To: <20240125-ktd2801-v5-0-e22da232a825@skole.hr> KTD2801 is a LED backlight driver IC found in samsung,coreprimevelte. The brightness can be set using PWM or the ExpressWire protocol. Add support for the KTD2801. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> --- MAINTAINERS | 6 ++ drivers/video/backlight/Kconfig | 7 ++ drivers/video/backlight/Makefile | 1 + drivers/video/backlight/ktd2801-backlight.c | 128 ++++++++++++++++++++++++++++ 4 files changed, 142 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index e1c83e0e837a..01cd1a460907 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12052,6 +12052,12 @@ S: Maintained F: Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml F: drivers/video/backlight/ktd253-backlight.c +KTD2801 BACKLIGHT DRIVER +M: Duje Mihanović <duje.mihanovic@skole.hr> +S: Maintained +F: Documentation/devicetree/bindings/leds/backlight/kinetic,ktd2801.yaml +F: drivers/video/backlight/ktd2801-backlight.c + KTEST M: Steven Rostedt <rostedt@goodmis.org> M: John Hawley <warthog9@eaglescrag.net> diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index ea2d0d69bd8c..230bca07b09d 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -183,6 +183,13 @@ config BACKLIGHT_KTD253 which is a 1-wire GPIO-controlled backlight found in some mobile phones. +config BACKLIGHT_KTD2801 + tristate "Backlight Driver for Kinetic KTD2801" + select LEDS_EXPRESSWIRE + help + Say Y to enable the backlight driver for the Kinetic KTD2801 1-wire + GPIO-controlled backlight found in Samsung Galaxy Core Prime VE LTE. + config BACKLIGHT_KTZ8866 tristate "Backlight Driver for Kinetic KTZ8866" depends on I2C diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index 06966cb20459..8d2cb252042d 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o obj-$(CONFIG_BACKLIGHT_HP700) += jornada720_bl.o obj-$(CONFIG_BACKLIGHT_IPAQ_MICRO) += ipaq_micro_bl.o obj-$(CONFIG_BACKLIGHT_KTD253) += ktd253-backlight.o +obj-$(CONFIG_BACKLIGHT_KTD2801) += ktd2801-backlight.o obj-$(CONFIG_BACKLIGHT_KTZ8866) += ktz8866.o obj-$(CONFIG_BACKLIGHT_LM3533) += lm3533_bl.o obj-$(CONFIG_BACKLIGHT_LM3630A) += lm3630a_bl.o diff --git a/drivers/video/backlight/ktd2801-backlight.c b/drivers/video/backlight/ktd2801-backlight.c new file mode 100644 index 000000000000..c020acff40f1 --- /dev/null +++ b/drivers/video/backlight/ktd2801-backlight.c @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Datasheet: + * https://www.kinet-ic.com/uploads/web/KTD2801/KTD2801-04b.pdf + */ +#include <linux/backlight.h> +#include <linux/gpio/consumer.h> +#include <linux/leds-expresswire.h> +#include <linux/platform_device.h> +#include <linux/property.h> + +#define KTD2801_DEFAULT_BRIGHTNESS 100 +#define KTD2801_MAX_BRIGHTNESS 255 + +/* These values have been extracted from Samsung's driver. */ +const struct expresswire_timing ktd2801_timing = { + .poweroff_us = 2600, + .detect_delay_us = 150, + .detect_us = 270, + .data_start_us = 5, + .short_bitset_us = 5, + .long_bitset_us = 15, + .end_of_data_low_us = 10, + .end_of_data_high_us = 350 +}; + +struct ktd2801_backlight { + struct expresswire_common_props props; + struct backlight_device *bd; + bool was_on; +}; + +static int ktd2801_update_status(struct backlight_device *bd) +{ + struct ktd2801_backlight *ktd2801 = bl_get_data(bd); + u8 brightness = (u8) backlight_get_brightness(bd); + + if (backlight_is_blank(bd)) { + expresswire_power_off(&ktd2801->props); + ktd2801->was_on = false; + return 0; + } + + if (!ktd2801->was_on) { + expresswire_enable(&ktd2801->props); + ktd2801->was_on = true; + } + + expresswire_write_u8(&ktd2801->props, brightness); + + return 0; +} + +static const struct backlight_ops ktd2801_backlight_ops = { + .update_status = ktd2801_update_status, +}; + +static int ktd2801_backlight_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct backlight_device *bd; + struct ktd2801_backlight *ktd2801; + u32 brightness, max_brightness; + int ret; + + ktd2801 = devm_kzalloc(dev, sizeof(*ktd2801), GFP_KERNEL); + if (!ktd2801) + return -ENOMEM; + ktd2801->was_on = true; + ktd2801->props.timing = ktd2801_timing; + + ret = device_property_read_u32(dev, "max-brightness", &max_brightness); + if (ret) + max_brightness = KTD2801_MAX_BRIGHTNESS; + if (max_brightness > KTD2801_MAX_BRIGHTNESS) { + dev_err(dev, "illegal max brightness specified\n"); + max_brightness = KTD2801_MAX_BRIGHTNESS; + } + + ret = device_property_read_u32(dev, "default-brightness", &brightness); + if (ret) + brightness = KTD2801_DEFAULT_BRIGHTNESS; + if (brightness > max_brightness) { + dev_err(dev, "default brightness exceeds max\n"); + brightness = max_brightness; + } + + ktd2801->props.ctrl_gpio = devm_gpiod_get(dev, "ctrl", GPIOD_OUT_HIGH); + if (IS_ERR(ktd2801->props.ctrl_gpio)) + return dev_err_probe(dev, PTR_ERR(ktd2801->props.ctrl_gpio), + "failed to get backlight GPIO"); + gpiod_set_consumer_name(ktd2801->props.ctrl_gpio, dev_name(dev)); + + bd = devm_backlight_device_register(dev, dev_name(dev), dev, ktd2801, + &ktd2801_backlight_ops, NULL); + if (IS_ERR(bd)) + return dev_err_probe(dev, PTR_ERR(bd), + "failed to register backlight"); + + bd->props.max_brightness = max_brightness; + bd->props.brightness = brightness; + + ktd2801->bd = bd; + platform_set_drvdata(pdev, bd); + backlight_update_status(bd); + + return 0; +} + +static const struct of_device_id ktd2801_of_match[] = { + { .compatible = "kinetic,ktd2801" }, + { } +}; +MODULE_DEVICE_TABLE(of, ktd2801_of_match); + +static struct platform_driver ktd2801_backlight_driver = { + .driver = { + .name = "ktd2801-backlight", + .of_match_table = ktd2801_of_match, + }, + .probe = ktd2801_backlight_probe, +}; +module_platform_driver(ktd2801_backlight_driver); + +MODULE_IMPORT_NS(EXPRESSWIRE); +MODULE_AUTHOR("Duje Mihanović <duje.mihanovic@skole.hr>"); +MODULE_DESCRIPTION("Kinetic KTD2801 Backlight Driver"); +MODULE_LICENSE("GPL"); -- 2.43.0
next prev parent reply other threads:[~2024-01-25 15:32 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-01-25 15:30 [PATCH v5 0/4] Kinetic ExpressWire library and KTD2801 backlight driver Duje Mihanović 2024-01-25 15:30 ` Duje Mihanović 2024-01-25 15:30 ` [PATCH v5 1/4] leds: introduce ExpressWire library Duje Mihanović 2024-01-25 15:30 ` Duje Mihanović 2024-01-25 15:30 ` [PATCH v5 2/4] leds: ktd2692: convert to use " Duje Mihanović 2024-01-25 15:30 ` Duje Mihanović 2024-01-25 15:30 ` [PATCH v5 3/4] dt-bindings: backlight: add Kinetic KTD2801 binding Duje Mihanović 2024-01-25 15:30 ` Duje Mihanović 2024-01-25 15:30 ` Duje Mihanović [this message] 2024-01-25 15:30 ` [PATCH v5 4/4] backlight: Add Kinetic KTD2801 backlight support Duje Mihanović 2024-02-01 11:46 ` [PATCH v5 0/4] Kinetic ExpressWire library and KTD2801 backlight driver Lee Jones 2024-02-01 11:46 ` Lee Jones
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240125-ktd2801-v5-4-e22da232a825@skole.hr \ --to=duje.mihanovic@skole.hr \ --cc=balejk@matfyz.cz \ --cc=conor+dt@kernel.org \ --cc=daniel.thompson@linaro.org \ --cc=deller@gmx.de \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=jingoohan1@gmail.com \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=lee@kernel.org \ --cc=linus.walleij@linaro.org \ --cc=linux-fbdev@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-leds@vger.kernel.org \ --cc=pavel@ucw.cz \ --cc=phone-devel@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=~postmarketos/upstreaming@lists.sr.ht \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.