All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chen-Yu Tsai <wenst@chromium.org>
To: Marcel Holtmann <marcel@holtmann.org>,
	Luiz Augusto von Dentz <luiz.dentz@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>
Cc: Chen-Yu Tsai <wenst@chromium.org>,
	Sean Wang <sean.wang@mediatek.com>,
	linux-bluetooth@vger.kernel.org, netdev@vger.kernel.org,
	linux-mediatek@lists.infradead.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Date: Thu, 25 Jan 2024 17:52:37 +0800	[thread overview]
Message-ID: <20240125095240.2308340-2-wenst@chromium.org> (raw)
In-Reply-To: <20240125095240.2308340-1-wenst@chromium.org>

The MediaTek MT7921S is a WiFi/Bluetooth combo chip that works over
SDIO. While the Bluetooth function is fully discoverable, the chip
has a pin that can reset just the Bluetooth side, as opposed to the
full chip. This needs to be described in the device tree.

Add a device tree binding for MT7921S Bluetooth over SDIO specifically
ot document the reset line.

Cc: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
 .../bluetooth/mediatek,mt7921s-bluetooth.yaml | 49 +++++++++++++++++++
 MAINTAINERS                                   |  1 +
 2 files changed, 50 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml

diff --git a/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml
new file mode 100644
index 000000000000..bbe240e7cc40
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/bluetooth/mediatek,mt7921s-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7921S Bluetooth
+
+description:
+  This binding describes the Bluetooth side of the SDIO-attached MT7921S
+  WiFi+Bluetooth combo chips. These chips are dual-radio chips supporting
+  WiFi and Bluetooth. Bluetooth works over SDIO just like WiFi. Bluetooth
+  has its own reset line, separate from WiFi, which can be used to reset
+  the Bluetooth core.
+
+maintainers:
+  - Sean Wang <sean.wang@mediatek.com>
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7921s-bluetooth
+  reg:
+    const: 2
+
+  reset-gpios:
+    maxItems: 1
+    description: A GPIO line connected to the Bluetooth subsystem reset line.
+      Typically the W_DISABLE2# pin on M.2 E-key modules. If present this
+      shall be flagged as active low.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    mmc {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bluetooth@2 {
+            compatible = "mediatek,mt7921s-bluetooth";
+            reg = <2>;
+            reset-gpios = <&pio 8 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index b64a64ca7916..662957146852 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13657,6 +13657,7 @@ M:	Sean Wang <sean.wang@mediatek.com>
 L:	linux-bluetooth@vger.kernel.org
 L:	linux-mediatek@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+F:	Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml
 F:	Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
 F:	drivers/bluetooth/btmtkuart.c
 
-- 
2.43.0.429.g432eaa2c6b-goog


WARNING: multiple messages have this Message-ID (diff)
From: Chen-Yu Tsai <wenst@chromium.org>
To: Marcel Holtmann <marcel@holtmann.org>,
	Luiz Augusto von Dentz <luiz.dentz@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>
Cc: Chen-Yu Tsai <wenst@chromium.org>,
	Sean Wang <sean.wang@mediatek.com>,
	linux-bluetooth@vger.kernel.org, netdev@vger.kernel.org,
	linux-mediatek@lists.infradead.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Date: Thu, 25 Jan 2024 17:52:37 +0800	[thread overview]
Message-ID: <20240125095240.2308340-2-wenst@chromium.org> (raw)
In-Reply-To: <20240125095240.2308340-1-wenst@chromium.org>

The MediaTek MT7921S is a WiFi/Bluetooth combo chip that works over
SDIO. While the Bluetooth function is fully discoverable, the chip
has a pin that can reset just the Bluetooth side, as opposed to the
full chip. This needs to be described in the device tree.

Add a device tree binding for MT7921S Bluetooth over SDIO specifically
ot document the reset line.

Cc: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
 .../bluetooth/mediatek,mt7921s-bluetooth.yaml | 49 +++++++++++++++++++
 MAINTAINERS                                   |  1 +
 2 files changed, 50 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml

diff --git a/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml
new file mode 100644
index 000000000000..bbe240e7cc40
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/bluetooth/mediatek,mt7921s-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7921S Bluetooth
+
+description:
+  This binding describes the Bluetooth side of the SDIO-attached MT7921S
+  WiFi+Bluetooth combo chips. These chips are dual-radio chips supporting
+  WiFi and Bluetooth. Bluetooth works over SDIO just like WiFi. Bluetooth
+  has its own reset line, separate from WiFi, which can be used to reset
+  the Bluetooth core.
+
+maintainers:
+  - Sean Wang <sean.wang@mediatek.com>
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7921s-bluetooth
+  reg:
+    const: 2
+
+  reset-gpios:
+    maxItems: 1
+    description: A GPIO line connected to the Bluetooth subsystem reset line.
+      Typically the W_DISABLE2# pin on M.2 E-key modules. If present this
+      shall be flagged as active low.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    mmc {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bluetooth@2 {
+            compatible = "mediatek,mt7921s-bluetooth";
+            reg = <2>;
+            reset-gpios = <&pio 8 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index b64a64ca7916..662957146852 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13657,6 +13657,7 @@ M:	Sean Wang <sean.wang@mediatek.com>
 L:	linux-bluetooth@vger.kernel.org
 L:	linux-mediatek@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+F:	Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml
 F:	Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
 F:	drivers/bluetooth/btmtkuart.c
 
-- 
2.43.0.429.g432eaa2c6b-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2024-01-25  9:52 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-25  9:52 [PATCH 0/2] bluetooth: mt7921s: Add binding and fixup existing dts Chen-Yu Tsai
2024-01-25  9:52 ` Chen-Yu Tsai
2024-01-25  9:52 ` Chen-Yu Tsai [this message]
2024-01-25  9:52   ` [PATCH 1/2] dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth Chen-Yu Tsai
2024-01-25 10:13   ` bluetooth: mt7921s: Add binding and fixup existing dts bluez.test.bot
2024-01-25 11:39   ` [PATCH 1/2] dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth AngeloGioacchino Del Regno
2024-01-25 11:39     ` AngeloGioacchino Del Regno
2024-01-26  3:26     ` Chen-Yu Tsai
2024-01-26  3:26       ` Chen-Yu Tsai
2024-01-26  9:12       ` AngeloGioacchino Del Regno
2024-01-26  9:12         ` AngeloGioacchino Del Regno
2024-01-26  3:02   ` Rob Herring
2024-01-26  3:02     ` Rob Herring
2024-01-25  9:52 ` [PATCH 2/2] arm64: dts: mediatek: mt8183-pico6: Fix bluetooth node Chen-Yu Tsai
2024-01-25  9:52   ` Chen-Yu Tsai
2024-01-25 11:40   ` AngeloGioacchino Del Regno
2024-01-25 11:40     ` AngeloGioacchino Del Regno

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240125095240.2308340-2-wenst@chromium.org \
    --to=wenst@chromium.org \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=luiz.dentz@gmail.com \
    --cc=marcel@holtmann.org \
    --cc=matthias.bgg@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sean.wang@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.