All of lore.kernel.org
 help / color / mirror / Atom feed
From: Judith Mendez <jm@ti.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>,
	<linux-mmc@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
	Andrew Davis <afd@ti.com>, Udit Kumar <u-kumar1@ti.com>,
	Roger Quadros <rogerq@kernel.org>, <devicetree@vger.kernel.org>,
	Randolph Sapp <rs@ti.com>
Subject: [RFC PATCH 12/13] arm64: dts: ti: k3-am6*: Remove DLL properties for soft phys
Date: Tue, 30 Jan 2024 18:37:13 -0600	[thread overview]
Message-ID: <20240131003714.2779593-13-jm@ti.com> (raw)
In-Reply-To: <20240131003714.2779593-1-jm@ti.com>

Remove DLL properties which are not applicable for soft phys
since they do not have a DLL to enable.

Signed-off-by: Judith Mendez <jm@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62-main.dtsi       | 3 ---
 arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 3 ---
 arch/arm64/boot/dts/ti/k3-am62a-main.dtsi      | 1 -
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts        | 1 -
 arch/arm64/boot/dts/ti/k3-am62p5-sk.dts        | 1 -
 arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 2 --
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi       | 1 -
 arch/arm64/boot/dts/ti/k3-am642-evm.dts        | 1 -
 arch/arm64/boot/dts/ti/k3-am642-sk.dts         | 1 -
 9 files changed, 14 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index d10a02ede06c..ca825088970f 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -561,7 +561,6 @@ sdhci0: mmc@fa10000 {
 		assigned-clock-parents = <&k3_clks 57 8>;
 		mmc-ddr-1_8v;
 		mmc-hs200-1_8v;
-		ti,trm-icp = <0x2>;
 		bus-width = <8>;
 		ti,clkbuf-sel = <0x7>;
 		ti,otap-del-sel-legacy = <0x0>;
@@ -577,7 +576,6 @@ sdhci1: mmc@fa00000 {
 		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
 		clock-names = "clk_ahb", "clk_xin";
-		ti,trm-icp = <0x2>;
 		ti,clkbuf-sel = <0x7>;
 		bus-width = <4>;
 		ti,otap-del-sel-legacy = <0x0>;
@@ -601,7 +599,6 @@ sdhci2: mmc@fa20000 {
 		power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
 		clock-names = "clk_ahb", "clk_xin";
-		ti,trm-icp = <0x2>;
 		ti,clkbuf-sel = <0x7>;
 		ti,otap-del-sel-legacy = <0x0>;
 		ti,otap-del-sel-sd-hs = <0x0>;
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
index eadbdd9ffe37..f69dbf9b8406 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -827,7 +827,6 @@ &sdhci0 {
 	bootph-all;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_pins_default>;
-	ti,driver-strength-ohm = <50>;
 	disable-wp;
 	status = "okay";
 };
@@ -840,7 +839,6 @@ &sdhci1 {
 
 	vmmc-supply = <&vdd_3v3_sd>;
 	vqmmc-supply = <&vdd_sd_dv>;
-	ti,driver-strength-ohm = <50>;
 	disable-wp;
 	cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>;
 	cd-debounce-delay-ms = <100>;
@@ -857,7 +855,6 @@ &sdhci2 {
 	ti,fails-without-test-cd;
 	cap-power-off-card;
 	keep-power-in-suspend;
-	ti,driver-strength-ohm = <50>;
 	assigned-clocks = <&k3_clks 157 158>;
 	assigned-clock-parents = <&k3_clks 157 160>;
 	#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index 227e7fb3e5bb..db5a7746c82e 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -561,7 +561,6 @@ sdhci1: mmc@fa00000 {
 		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
 		clock-names = "clk_ahb", "clk_xin";
-		ti,trm-icp = <0x2>;
 		ti,otap-del-sel-legacy = <0x0>;
 		ti,otap-del-sel-sd-hs = <0x0>;
 		ti,otap-del-sel-sdr12 = <0xf>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index 2497acc0dd60..74816e08a15e 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -507,7 +507,6 @@ &sdhci1 {
 	vmmc-supply = <&vdd_mmc1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
-	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };
 
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
index 10156a04a92c..9e37e54f141a 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -426,7 +426,6 @@ &sdhci1 {
 	vqmmc-supply = <&vddshv_sdio>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
-	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };
 
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
index 33768c02d8eb..6dd48c826f74 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -411,7 +411,6 @@ &sdhci0 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
-	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };
 
@@ -421,7 +420,6 @@ &sdhci1 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
-	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };
 
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index b355d0a715a9..1842f05ac351 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -646,7 +646,6 @@ sdhci1: mmc@fa00000 {
 		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 58 3>, <&k3_clks 58 4>;
 		clock-names = "clk_ahb", "clk_xin";
-		ti,trm-icp = <0x2>;
 		ti,otap-del-sel-legacy = <0x0>;
 		ti,otap-del-sel-sd-hs = <0x0>;
 		ti,otap-del-sel-sdr12 = <0xf>;
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index 8c5651d2cf5d..0583ec3a9b52 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -508,7 +508,6 @@ &sdhci1 {
 	pinctrl-names = "default";
 	bus-width = <4>;
 	pinctrl-0 = <&main_mmc1_pins_default>;
-	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };
 
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 1dddd6fc1a0d..c3a77f6282cb 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -471,7 +471,6 @@ &sdhci1 {
 	pinctrl-names = "default";
 	bus-width = <4>;
 	pinctrl-0 = <&main_mmc1_pins_default>;
-	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };
 
-- 
2.34.1


  parent reply	other threads:[~2024-01-31  0:37 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-31  0:37 [RFC PATCH 00/13] Add tuning algorithm for delay chain Judith Mendez
2024-01-31  0:37 ` [RFC PATCH 01/13] drivers: mmc: host: sdhci_am654: " Judith Mendez
2024-01-31 11:04   ` Vignesh Raghavendra
2024-01-31 20:27     ` Judith Mendez
2024-02-02 10:00   ` Roger Quadros
2024-01-31  0:37 ` [RFC PATCH 02/13] drivers: mmc: host: sdhci_am654: Write ITAPDLY for DDR52 timing Judith Mendez
2024-01-31  0:37 ` [RFC PATCH 03/13] drivers: mmc: host: sdhci_am654: Add missing OTAP/ITAP enable Judith Mendez
2024-01-31  0:37 ` [RFC PATCH 04/13] drivers: mmc: host: sdhci_am654: Add ITAPDLYSEL in sdhci_j721e_4bit_set_clock Judith Mendez
2024-01-31  0:37 ` [RFC PATCH 05/13] drivers: mmc: host: sdhci_am654: Fix ITAPDLY for HS400 timing Judith Mendez
2024-01-31  0:37 ` [RFC PATCH 06/13] arm64: dts: ti: k3-am62a-main: Add sdhci0 instance Judith Mendez
2024-01-31 19:17   ` Nishanth Menon
2024-01-31 20:28     ` Judith Mendez
2024-01-31  0:37 ` [RFC PATCH 07/13] arm64: dts: ti: k3-am62a7-sk: Enable eMMC support Judith Mendez
2024-01-31  0:37 ` [RFC PATCH 08/13] arm64: dts: ti: k3-am62a-main: Add sdhci2 instance Judith Mendez
2024-01-31  0:37 ` [RFC PATCH 09/13] arm64: dts: ti: k3-am64-main: Update ITAP/OTAP values for MMC Judith Mendez
2024-01-31  0:37 ` [RFC PATCH 10/13] arm64: dts: ti: k3-am62-main: " Judith Mendez
2024-01-31  0:37 ` [RFC PATCH 11/13] arm64: dts: ti: k3-am62p: Add missing properties " Judith Mendez
2024-02-02  9:50   ` Roger Quadros
2024-02-12 23:38     ` Judith Mendez
2024-01-31  0:37 ` Judith Mendez [this message]
2024-01-31  0:37 ` [RFC PATCH 13/13] arm64: dts: ti: k3-am6*: Reorganize MMC properties Judith Mendez
2024-02-02  9:54   ` Roger Quadros
2024-02-12 23:41     ` Judith Mendez
2024-01-31 13:35 ` [RFC PATCH 00/13] Add tuning algorithm for delay chain Raghavendra, Vignesh
2024-01-31 13:41   ` Krzysztof Kozlowski
2024-01-31 13:53     ` Raghavendra, Vignesh
2024-02-01  7:28       ` Krzysztof Kozlowski
2024-01-31 20:41   ` Judith Mendez

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240131003714.2779593-13-jm@ti.com \
    --to=jm@ti.com \
    --cc=adrian.hunter@intel.com \
    --cc=afd@ti.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=rogerq@kernel.org \
    --cc=rs@ti.com \
    --cc=u-kumar1@ti.com \
    --cc=ulf.hansson@linaro.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.