From: Romain Naour <romain.naour@smile.fr> To: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, conor+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, robh+dt@kernel.org, kristo@kernel.org, vigneshr@ti.com, nm@ti.com Cc: Romain Naour <romain.naour@smile.fr>, Neha Malcom Francis <n-francis@ti.com> Subject: [PATCH v2 2/2] arm64: dts: ti: k3-j721e-sk: fix PMIC interrupt number Date: Fri, 9 Feb 2024 18:11:46 +0100 [thread overview] Message-ID: <20240209171146.307465-2-romain.naour@smile.fr> (raw) In-Reply-To: <20240209171146.307465-1-romain.naour@smile.fr> The tps659413 and tps659411 nodes set WKUP_GPIO0_7 (G28) pin as input to be used as PMIC interrupt but uses 9 (WKUP_GPIO0_9) as "interrupts" property. Replace 9 by 7 for both tps659413 and tps659411 after checking in the board schematic [1]. [1] https://www.ti.com/tool/SK-TDA4VM Fixes: b808cef0be46 ("arm64: dts: ti: k3-j721e-sk: Add TPS6594 family PMICs") Cc: Neha Malcom Francis <n-francis@ti.com> Signed-off-by: Romain Naour <romain.naour@smile.fr> --- v2: update tps659411 interrupts parameter too. --- arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts index 188dfe291a32..658764f7d544 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -574,7 +574,7 @@ tps659413: pmic@48 { pinctrl-names = "default"; pinctrl-0 = <&pmic_irq_pins_default>; interrupt-parent = <&wkup_gpio0>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; gpio-controller; #gpio-cells = <2>; ti,primary-pmic; @@ -651,7 +651,7 @@ tps659411: pmic@4c { reg = <0x4c>; system-power-controller; interrupt-parent = <&wkup_gpio0>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; gpio-controller; #gpio-cells = <2>; buck1234-supply = <&vsys_3v3>; -- 2.43.0
WARNING: multiple messages have this Message-ID (diff)
From: Romain Naour <romain.naour@smile.fr> To: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, conor+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, robh+dt@kernel.org, kristo@kernel.org, vigneshr@ti.com, nm@ti.com Cc: Romain Naour <romain.naour@smile.fr>, Neha Malcom Francis <n-francis@ti.com> Subject: [PATCH v2 2/2] arm64: dts: ti: k3-j721e-sk: fix PMIC interrupt number Date: Fri, 9 Feb 2024 18:11:46 +0100 [thread overview] Message-ID: <20240209171146.307465-2-romain.naour@smile.fr> (raw) In-Reply-To: <20240209171146.307465-1-romain.naour@smile.fr> The tps659413 and tps659411 nodes set WKUP_GPIO0_7 (G28) pin as input to be used as PMIC interrupt but uses 9 (WKUP_GPIO0_9) as "interrupts" property. Replace 9 by 7 for both tps659413 and tps659411 after checking in the board schematic [1]. [1] https://www.ti.com/tool/SK-TDA4VM Fixes: b808cef0be46 ("arm64: dts: ti: k3-j721e-sk: Add TPS6594 family PMICs") Cc: Neha Malcom Francis <n-francis@ti.com> Signed-off-by: Romain Naour <romain.naour@smile.fr> --- v2: update tps659411 interrupts parameter too. --- arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts index 188dfe291a32..658764f7d544 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -574,7 +574,7 @@ tps659413: pmic@48 { pinctrl-names = "default"; pinctrl-0 = <&pmic_irq_pins_default>; interrupt-parent = <&wkup_gpio0>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; gpio-controller; #gpio-cells = <2>; ti,primary-pmic; @@ -651,7 +651,7 @@ tps659411: pmic@4c { reg = <0x4c>; system-power-controller; interrupt-parent = <&wkup_gpio0>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; gpio-controller; #gpio-cells = <2>; buck1234-supply = <&vsys_3v3>; -- 2.43.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-02-09 17:11 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-02-09 17:11 [PATCH v2 1/2] arm64: dts: ti: k3-am69-sk: fix PMIC interrupt number Romain Naour 2024-02-09 17:11 ` Romain Naour 2024-02-09 17:11 ` Romain Naour [this message] 2024-02-09 17:11 ` [PATCH v2 2/2] arm64: dts: ti: k3-j721e-sk: " Romain Naour 2024-02-14 9:33 ` Neha Malcom Francis 2024-02-14 9:33 ` Neha Malcom Francis 2024-02-14 9:33 ` [PATCH v2 1/2] arm64: dts: ti: k3-am69-sk: " Neha Malcom Francis 2024-02-14 9:33 ` Neha Malcom Francis 2024-02-15 9:26 ` Vignesh Raghavendra 2024-02-15 9:26 ` Vignesh Raghavendra
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240209171146.307465-2-romain.naour@smile.fr \ --to=romain.naour@smile.fr \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=kristo@kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=n-francis@ti.com \ --cc=nm@ti.com \ --cc=robh+dt@kernel.org \ --cc=vigneshr@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.