All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: davem@davemloft.net
Cc: "Maxime Chevallier" <maxime.chevallier@bootlin.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	thomas.petazzoni@bootlin.com, "Andrew Lunn" <andrew@lunn.ch>,
	"Jakub Kicinski" <kuba@kernel.org>,
	"Eric Dumazet" <edumazet@google.com>,
	"Paolo Abeni" <pabeni@redhat.com>,
	"Russell King" <linux@armlinux.org.uk>,
	linux-arm-kernel@lists.infradead.org,
	"Christophe Leroy" <christophe.leroy@csgroup.eu>,
	"Herve Codina" <herve.codina@bootlin.com>,
	"Florian Fainelli" <f.fainelli@gmail.com>,
	"Heiner Kallweit" <hkallweit1@gmail.com>,
	"Vladimir Oltean" <vladimir.oltean@nxp.com>,
	"Köry Maincent" <kory.maincent@bootlin.com>,
	"Jesse Brandeburg" <jesse.brandeburg@intel.com>,
	"Jonathan Corbet" <corbet@lwn.net>,
	"Marek Behún" <kabel@kernel.org>,
	"Piergiorgio Beruto" <piergiorgio.beruto@gmail.com>,
	"Oleksij Rempel" <o.rempel@pengutronix.de>,
	"Nicolò Veronese" <nicveronese@gmail.com>,
	"Simon Horman" <horms@kernel.org>,
	mwojtas@chromium.org
Subject: [PATCH net-next v7 09/13] net: ethtool: plca: Target the command to the requested PHY
Date: Tue, 13 Feb 2024 16:04:26 +0100	[thread overview]
Message-ID: <20240213150431.1796171-10-maxime.chevallier@bootlin.com> (raw)
In-Reply-To: <20240213150431.1796171-1-maxime.chevallier@bootlin.com>

PLCA is a PHY-specific command. Instead of targeting the command
towards dev->phydev, use the request to pick the targeted PHY.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---

V7: No changes
V6: Use dedicated policy
V5: Added Andrew's R-b
V4: No changes
V3: No changes
V2: New patch

 net/ethtool/plca.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/net/ethtool/plca.c b/net/ethtool/plca.c
index b1e2e3b5027f..43b31a4a164e 100644
--- a/net/ethtool/plca.c
+++ b/net/ethtool/plca.c
@@ -25,7 +25,7 @@ struct plca_reply_data {
 
 const struct nla_policy ethnl_plca_get_cfg_policy[] = {
 	[ETHTOOL_A_PLCA_HEADER]		=
-		NLA_POLICY_NESTED(ethnl_header_policy),
+		NLA_POLICY_NESTED(ethnl_header_policy_phy),
 };
 
 static void plca_update_sint(int *dst, struct nlattr **tb, u32 attrid,
@@ -61,7 +61,7 @@ static int plca_get_cfg_prepare_data(const struct ethnl_req_info *req_base,
 	int ret;
 
 	// check that the PHY device is available and connected
-	if (!dev->phydev) {
+	if (!req_base->phydev) {
 		ret = -EOPNOTSUPP;
 		goto out;
 	}
@@ -80,7 +80,7 @@ static int plca_get_cfg_prepare_data(const struct ethnl_req_info *req_base,
 	memset(&data->plca_cfg, 0xff,
 	       sizeof_field(struct plca_reply_data, plca_cfg));
 
-	ret = ops->get_plca_cfg(dev->phydev, &data->plca_cfg);
+	ret = ops->get_plca_cfg(req_base->phydev, &data->plca_cfg);
 	ethnl_ops_complete(dev);
 
 out:
@@ -129,7 +129,7 @@ static int plca_get_cfg_fill_reply(struct sk_buff *skb,
 
 const struct nla_policy ethnl_plca_set_cfg_policy[] = {
 	[ETHTOOL_A_PLCA_HEADER]		=
-		NLA_POLICY_NESTED(ethnl_header_policy),
+		NLA_POLICY_NESTED(ethnl_header_policy_phy),
 	[ETHTOOL_A_PLCA_ENABLED]	= NLA_POLICY_MAX(NLA_U8, 1),
 	[ETHTOOL_A_PLCA_NODE_ID]	= NLA_POLICY_MAX(NLA_U32, 255),
 	[ETHTOOL_A_PLCA_NODE_CNT]	= NLA_POLICY_RANGE(NLA_U32, 1, 255),
@@ -141,7 +141,6 @@ const struct nla_policy ethnl_plca_set_cfg_policy[] = {
 static int
 ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info)
 {
-	struct net_device *dev = req_info->dev;
 	const struct ethtool_phy_ops *ops;
 	struct nlattr **tb = info->attrs;
 	struct phy_plca_cfg plca_cfg;
@@ -149,7 +148,7 @@ ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info)
 	int ret;
 
 	// check that the PHY device is available and connected
-	if (!dev->phydev)
+	if (!req_info->phydev)
 		return -EOPNOTSUPP;
 
 	ops = ethtool_phy_ops;
@@ -168,7 +167,7 @@ ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info)
 	if (!mod)
 		return 0;
 
-	ret = ops->set_plca_cfg(dev->phydev, &plca_cfg, info->extack);
+	ret = ops->set_plca_cfg(req_info->phydev, &plca_cfg, info->extack);
 	return ret < 0 ? ret : 1;
 }
 
@@ -191,7 +190,7 @@ const struct ethnl_request_ops ethnl_plca_cfg_request_ops = {
 
 const struct nla_policy ethnl_plca_get_status_policy[] = {
 	[ETHTOOL_A_PLCA_HEADER]		=
-		NLA_POLICY_NESTED(ethnl_header_policy),
+		NLA_POLICY_NESTED(ethnl_header_policy_phy),
 };
 
 static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base,
@@ -204,7 +203,7 @@ static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base,
 	int ret;
 
 	// check that the PHY device is available and connected
-	if (!dev->phydev) {
+	if (!req_base->phydev) {
 		ret = -EOPNOTSUPP;
 		goto out;
 	}
@@ -223,7 +222,7 @@ static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base,
 	memset(&data->plca_st, 0xff,
 	       sizeof_field(struct plca_reply_data, plca_st));
 
-	ret = ops->get_plca_status(dev->phydev, &data->plca_st);
+	ret = ops->get_plca_status(req_base->phydev, &data->plca_st);
 	ethnl_ops_complete(dev);
 out:
 	return ret;
-- 
2.43.0


WARNING: multiple messages have this Message-ID (diff)
From: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: davem@davemloft.net
Cc: "Maxime Chevallier" <maxime.chevallier@bootlin.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	thomas.petazzoni@bootlin.com, "Andrew Lunn" <andrew@lunn.ch>,
	"Jakub Kicinski" <kuba@kernel.org>,
	"Eric Dumazet" <edumazet@google.com>,
	"Paolo Abeni" <pabeni@redhat.com>,
	"Russell King" <linux@armlinux.org.uk>,
	linux-arm-kernel@lists.infradead.org,
	"Christophe Leroy" <christophe.leroy@csgroup.eu>,
	"Herve Codina" <herve.codina@bootlin.com>,
	"Florian Fainelli" <f.fainelli@gmail.com>,
	"Heiner Kallweit" <hkallweit1@gmail.com>,
	"Vladimir Oltean" <vladimir.oltean@nxp.com>,
	"Köry Maincent" <kory.maincent@bootlin.com>,
	"Jesse Brandeburg" <jesse.brandeburg@intel.com>,
	"Jonathan Corbet" <corbet@lwn.net>,
	"Marek Behún" <kabel@kernel.org>,
	"Piergiorgio Beruto" <piergiorgio.beruto@gmail.com>,
	"Oleksij Rempel" <o.rempel@pengutronix.de>,
	"Nicolò Veronese" <nicveronese@gmail.com>,
	"Simon Horman" <horms@kernel.org>,
	mwojtas@chromium.org
Subject: [PATCH net-next v7 09/13] net: ethtool: plca: Target the command to the requested PHY
Date: Tue, 13 Feb 2024 16:04:26 +0100	[thread overview]
Message-ID: <20240213150431.1796171-10-maxime.chevallier@bootlin.com> (raw)
In-Reply-To: <20240213150431.1796171-1-maxime.chevallier@bootlin.com>

PLCA is a PHY-specific command. Instead of targeting the command
towards dev->phydev, use the request to pick the targeted PHY.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---

V7: No changes
V6: Use dedicated policy
V5: Added Andrew's R-b
V4: No changes
V3: No changes
V2: New patch

 net/ethtool/plca.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/net/ethtool/plca.c b/net/ethtool/plca.c
index b1e2e3b5027f..43b31a4a164e 100644
--- a/net/ethtool/plca.c
+++ b/net/ethtool/plca.c
@@ -25,7 +25,7 @@ struct plca_reply_data {
 
 const struct nla_policy ethnl_plca_get_cfg_policy[] = {
 	[ETHTOOL_A_PLCA_HEADER]		=
-		NLA_POLICY_NESTED(ethnl_header_policy),
+		NLA_POLICY_NESTED(ethnl_header_policy_phy),
 };
 
 static void plca_update_sint(int *dst, struct nlattr **tb, u32 attrid,
@@ -61,7 +61,7 @@ static int plca_get_cfg_prepare_data(const struct ethnl_req_info *req_base,
 	int ret;
 
 	// check that the PHY device is available and connected
-	if (!dev->phydev) {
+	if (!req_base->phydev) {
 		ret = -EOPNOTSUPP;
 		goto out;
 	}
@@ -80,7 +80,7 @@ static int plca_get_cfg_prepare_data(const struct ethnl_req_info *req_base,
 	memset(&data->plca_cfg, 0xff,
 	       sizeof_field(struct plca_reply_data, plca_cfg));
 
-	ret = ops->get_plca_cfg(dev->phydev, &data->plca_cfg);
+	ret = ops->get_plca_cfg(req_base->phydev, &data->plca_cfg);
 	ethnl_ops_complete(dev);
 
 out:
@@ -129,7 +129,7 @@ static int plca_get_cfg_fill_reply(struct sk_buff *skb,
 
 const struct nla_policy ethnl_plca_set_cfg_policy[] = {
 	[ETHTOOL_A_PLCA_HEADER]		=
-		NLA_POLICY_NESTED(ethnl_header_policy),
+		NLA_POLICY_NESTED(ethnl_header_policy_phy),
 	[ETHTOOL_A_PLCA_ENABLED]	= NLA_POLICY_MAX(NLA_U8, 1),
 	[ETHTOOL_A_PLCA_NODE_ID]	= NLA_POLICY_MAX(NLA_U32, 255),
 	[ETHTOOL_A_PLCA_NODE_CNT]	= NLA_POLICY_RANGE(NLA_U32, 1, 255),
@@ -141,7 +141,6 @@ const struct nla_policy ethnl_plca_set_cfg_policy[] = {
 static int
 ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info)
 {
-	struct net_device *dev = req_info->dev;
 	const struct ethtool_phy_ops *ops;
 	struct nlattr **tb = info->attrs;
 	struct phy_plca_cfg plca_cfg;
@@ -149,7 +148,7 @@ ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info)
 	int ret;
 
 	// check that the PHY device is available and connected
-	if (!dev->phydev)
+	if (!req_info->phydev)
 		return -EOPNOTSUPP;
 
 	ops = ethtool_phy_ops;
@@ -168,7 +167,7 @@ ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info)
 	if (!mod)
 		return 0;
 
-	ret = ops->set_plca_cfg(dev->phydev, &plca_cfg, info->extack);
+	ret = ops->set_plca_cfg(req_info->phydev, &plca_cfg, info->extack);
 	return ret < 0 ? ret : 1;
 }
 
@@ -191,7 +190,7 @@ const struct ethnl_request_ops ethnl_plca_cfg_request_ops = {
 
 const struct nla_policy ethnl_plca_get_status_policy[] = {
 	[ETHTOOL_A_PLCA_HEADER]		=
-		NLA_POLICY_NESTED(ethnl_header_policy),
+		NLA_POLICY_NESTED(ethnl_header_policy_phy),
 };
 
 static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base,
@@ -204,7 +203,7 @@ static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base,
 	int ret;
 
 	// check that the PHY device is available and connected
-	if (!dev->phydev) {
+	if (!req_base->phydev) {
 		ret = -EOPNOTSUPP;
 		goto out;
 	}
@@ -223,7 +222,7 @@ static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base,
 	memset(&data->plca_st, 0xff,
 	       sizeof_field(struct plca_reply_data, plca_st));
 
-	ret = ops->get_plca_status(dev->phydev, &data->plca_st);
+	ret = ops->get_plca_status(req_base->phydev, &data->plca_st);
 	ethnl_ops_complete(dev);
 out:
 	return ret;
-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2024-02-13 15:04 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-13 15:04 [PATCH net-next v7 00/13] Introduce PHY listing and link_topology tracking Maxime Chevallier
2024-02-13 15:04 ` Maxime Chevallier
2024-02-13 15:04 ` [PATCH net-next v7 01/13] net: phy: Introduce ethernet link topology representation Maxime Chevallier
2024-02-13 15:04   ` Maxime Chevallier
2024-02-13 15:04 ` [PATCH net-next v7 02/13] net: sfp: pass the phy_device when disconnecting an sfp module's PHY Maxime Chevallier
2024-02-13 15:04   ` Maxime Chevallier
2024-02-13 15:04 ` [PATCH net-next v7 03/13] net: phy: add helpers to handle sfp phy connect/disconnect Maxime Chevallier
2024-02-13 15:04   ` Maxime Chevallier
2024-02-13 15:04 ` [PATCH net-next v7 04/13] net: sfp: Add helper to return the SFP bus name Maxime Chevallier
2024-02-13 15:04   ` Maxime Chevallier
2024-02-13 15:04 ` [PATCH net-next v7 05/13] net: ethtool: Allow passing a phy index for some commands Maxime Chevallier
2024-02-13 15:04   ` Maxime Chevallier
2024-02-13 15:04 ` [PATCH net-next v7 06/13] netlink: specs: add phy-index as a header parameter Maxime Chevallier
2024-02-13 15:04   ` Maxime Chevallier
2024-02-13 15:04 ` [PATCH net-next v7 07/13] net: ethtool: Introduce a command to list PHYs on an interface Maxime Chevallier
2024-02-13 15:04   ` Maxime Chevallier
2024-02-13 15:04 ` [PATCH net-next v7 08/13] netlink: specs: add ethnl PHY_GET command set Maxime Chevallier
2024-02-13 15:04   ` Maxime Chevallier
2024-02-13 15:04 ` Maxime Chevallier [this message]
2024-02-13 15:04   ` [PATCH net-next v7 09/13] net: ethtool: plca: Target the command to the requested PHY Maxime Chevallier
2024-02-13 15:04 ` [PATCH net-next v7 10/13] net: ethtool: pse-pd: " Maxime Chevallier
2024-02-13 15:04   ` Maxime Chevallier
2024-02-13 15:04 ` [PATCH net-next v7 11/13] net: ethtool: cable-test: " Maxime Chevallier
2024-02-13 15:04   ` Maxime Chevallier
2024-02-13 15:04 ` [PATCH net-next v7 12/13] net: ethtool: strset: Allow querying phy stats by index Maxime Chevallier
2024-02-13 15:04   ` Maxime Chevallier
2024-02-13 15:04 ` [PATCH net-next v7 13/13] Documentation: networking: document phy_link_topology Maxime Chevallier
2024-02-13 15:04   ` Maxime Chevallier
2024-02-15  0:59 ` [PATCH net-next v7 00/13] Introduce PHY listing and link_topology tracking Jakub Kicinski
2024-02-15  0:59   ` Jakub Kicinski
2024-02-15  7:19   ` Maxime Chevallier
2024-02-15  7:19     ` Maxime Chevallier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240213150431.1796171-10-maxime.chevallier@bootlin.com \
    --to=maxime.chevallier@bootlin.com \
    --cc=andrew@lunn.ch \
    --cc=christophe.leroy@csgroup.eu \
    --cc=corbet@lwn.net \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=f.fainelli@gmail.com \
    --cc=herve.codina@bootlin.com \
    --cc=hkallweit1@gmail.com \
    --cc=horms@kernel.org \
    --cc=jesse.brandeburg@intel.com \
    --cc=kabel@kernel.org \
    --cc=kory.maincent@bootlin.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mwojtas@chromium.org \
    --cc=netdev@vger.kernel.org \
    --cc=nicveronese@gmail.com \
    --cc=o.rempel@pengutronix.de \
    --cc=pabeni@redhat.com \
    --cc=piergiorgio.beruto@gmail.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=vladimir.oltean@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.