[PATCH v3 10/15] iio: adc: ti-ads1015: Use device_for_each_child_node_scoped()

[Jonathan Cameron <jic23@kernel.org>]

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Switching to the _scoped() version removes the need for manual
calling of fwnode_handle_put() in the paths where the code
exits the loop early. In this case that's all in error paths.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/adc/ti-ads1015.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c
index 6ae967e4d8fa..d3363d02f292 100644
--- a/drivers/iio/adc/ti-ads1015.c
+++ b/drivers/iio/adc/ti-ads1015.c
@@ -902,10 +902,9 @@ static int ads1015_client_get_channels_config(struct i2c_client *client)
 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
 	struct ads1015_data *data = iio_priv(indio_dev);
 	struct device *dev = &client->dev;
-	struct fwnode_handle *node;
 	int i = -1;
 
-	device_for_each_child_node(dev, node) {
+	device_for_each_child_node_scoped(dev, node) {
 		u32 pval;
 		unsigned int channel;
 		unsigned int pga = ADS1015_DEFAULT_PGA;
@@ -927,7 +926,6 @@ static int ads1015_client_get_channels_config(struct i2c_client *client)
 			pga = pval;
 			if (pga > 5) {
 				dev_err(dev, "invalid gain on %pfw\n", node);
-				fwnode_handle_put(node);
 				return -EINVAL;
 			}
 		}
@@ -936,7 +934,6 @@ static int ads1015_client_get_channels_config(struct i2c_client *client)
 			data_rate = pval;
 			if (data_rate > 7) {
 				dev_err(dev, "invalid data_rate on %pfw\n", node);
-				fwnode_handle_put(node);
 				return -EINVAL;
 			}
 		}
-- 
2.43.2