All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wesley Cheng <quic_wcheng@quicinc.com>
To: <srinivas.kandagatla@linaro.org>, <mathias.nyman@intel.com>,
	<perex@perex.cz>, <conor+dt@kernel.org>, <corbet@lwn.net>,
	<lgirdwood@gmail.com>, <andersson@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>, <gregkh@linuxfoundation.org>,
	<Thinh.Nguyen@synopsys.com>, <broonie@kernel.org>,
	<bgoswami@quicinc.com>, <tiwai@suse.com>, <robh+dt@kernel.org>,
	<konrad.dybcio@linaro.org>
Cc: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-sound@vger.kernel.org>, <linux-usb@vger.kernel.org>,
	<linux-arm-msm@vger.kernel.org>, <linux-doc@vger.kernel.org>,
	<alsa-devel@alsa-project.org>,
	Mathias Nyman <mathias.nyman@linux.intel.com>,
	Wesley Cheng <quic_wcheng@quicinc.com>
Subject: [PATCH v17 03/51] xhci: make isoc_bei_interval variable interrupter specific.
Date: Fri, 16 Feb 2024 16:09:29 -0800	[thread overview]
Message-ID: <20240217001017.29969-4-quic_wcheng@quicinc.com> (raw)
In-Reply-To: <20240217001017.29969-1-quic_wcheng@quicinc.com>

From: Mathias Nyman <mathias.nyman@linux.intel.com>

isoc_bei_interval is used to balance how often completed isochronous
events cause interrupts. If interval is too large then the event ring
may fill up before the completed isoc TRBs are handled.

isoc_bei_interval is tuned based on how full the event ring is.

isoc_bei_interval variable needs to be per interrupter as
with several interrupters each one has its own event ring.

move isoc_bei_interval variable to the interrupter structure.

if a secondary interrupter does not care about this feature then
keep isoc_bei_interval 0.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
---
 drivers/usb/host/xhci-mem.c  |  2 +-
 drivers/usb/host/xhci-ring.c | 15 +++++++++------
 drivers/usb/host/xhci.h      |  2 +-
 3 files changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index a7716202a8dd..450adaca68ee 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -2533,7 +2533,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	if (xhci_add_interrupter(xhci, ir, 0))
 		goto fail;
 
-	xhci->isoc_bei_interval = AVOID_BEI_INTERVAL_MAX;
+	ir->isoc_bei_interval = AVOID_BEI_INTERVAL_MAX;
 
 	/*
 	 * XXX: Might need to set the Interrupter Moderation Register to
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 3d9ec78bfb9f..49f10dc25516 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -3153,8 +3153,8 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
 		event_ring_deq = ir->event_ring->dequeue;
 
 		/* ring is half-full, force isoc trbs to interrupt more often */
-		if (xhci->isoc_bei_interval > AVOID_BEI_INTERVAL_MIN)
-			xhci->isoc_bei_interval = xhci->isoc_bei_interval / 2;
+		if (ir->isoc_bei_interval > AVOID_BEI_INTERVAL_MIN)
+			ir->isoc_bei_interval = ir->isoc_bei_interval / 2;
 
 		event_loop = 0;
 	}
@@ -4022,7 +4022,8 @@ static int xhci_get_isoc_frame_id(struct xhci_hcd *xhci,
 }
 
 /* Check if we should generate event interrupt for a TD in an isoc URB */
-static bool trb_block_event_intr(struct xhci_hcd *xhci, int num_tds, int i)
+static bool trb_block_event_intr(struct xhci_hcd *xhci, int num_tds, int i,
+				 struct xhci_interrupter *ir)
 {
 	if (xhci->hci_version < 0x100)
 		return false;
@@ -4033,8 +4034,8 @@ static bool trb_block_event_intr(struct xhci_hcd *xhci, int num_tds, int i)
 	 * If AVOID_BEI is set the host handles full event rings poorly,
 	 * generate an event at least every 8th TD to clear the event ring
 	 */
-	if (i && xhci->quirks & XHCI_AVOID_BEI)
-		return !!(i % xhci->isoc_bei_interval);
+	if (i && ir->isoc_bei_interval && xhci->quirks & XHCI_AVOID_BEI)
+		return !!(i % ir->isoc_bei_interval);
 
 	return true;
 }
@@ -4043,6 +4044,7 @@ static bool trb_block_event_intr(struct xhci_hcd *xhci, int num_tds, int i)
 static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		struct urb *urb, int slot_id, unsigned int ep_index)
 {
+	struct xhci_interrupter *ir;
 	struct xhci_ring *ep_ring;
 	struct urb_priv *urb_priv;
 	struct xhci_td *td;
@@ -4060,6 +4062,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 
 	xep = &xhci->devs[slot_id]->eps[ep_index];
 	ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
+	ir = xhci->interrupters[0];
 
 	num_tds = urb->number_of_packets;
 	if (num_tds < 1) {
@@ -4147,7 +4150,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 				td->last_trb = ep_ring->enqueue;
 				td->last_trb_seg = ep_ring->enq_seg;
 				field |= TRB_IOC;
-				if (trb_block_event_intr(xhci, num_tds, i))
+				if (trb_block_event_intr(xhci, num_tds, i, ir))
 					field |= TRB_BEI;
 			}
 			/* Calculate TRB length */
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 36c3ba64da51..6e09b9130fae 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1433,6 +1433,7 @@ struct xhci_interrupter {
 	struct xhci_intr_reg __iomem *ir_set;
 	unsigned int		intr_num;
 	bool			ip_autoclear;
+	u32			isoc_bei_interval;
 	/* For interrupter registers save and restore over suspend/resume */
 	u32	s3_irq_pending;
 	u32	s3_irq_control;
@@ -1505,7 +1506,6 @@ struct xhci_hcd {
 	u8		isoc_threshold;
 	/* imod_interval in ns (I * 250ns) */
 	u32		imod_interval;
-	u32		isoc_bei_interval;
 	int		event_ring_max;
 	/* 4KB min, 128MB max */
 	int		page_size;

  parent reply	other threads:[~2024-02-17  0:10 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-17  0:09 [PATCH v17 00/51] Introduce QC USB SND audio offloading support Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 01/51] xhci: Add interrupt pending autoclear flag to each interrupter Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 02/51] xhci: Add helper to set an interrupters interrupt moderation interval Wesley Cheng
2024-02-17  0:09 ` Wesley Cheng [this message]
2024-02-17  0:09 ` [PATCH v17 04/51] xhci: remove unnecessary event_ring_deq parameter from xhci_handle_event() Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 05/51] xhci: update event ring dequeue pointer position to controller correctly Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 06/51] xhci: move event processing for one interrupter to a separate function Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 07/51] xhci: add helper that checks for unhandled events on a event ring Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 08/51] xhci: Don't check if the event ring is valid before every event TRB Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 09/51] xhci: Decouple handling an event from checking for unhandled events Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 10/51] xhci: add helper to stop endpoint and wait for completion Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 11/51] usb: host: xhci: Export enable and disable interrupter APIs Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 12/51] usb: host: xhci: Repurpose event handler for skipping interrupter events Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 13/51] xhci: export XHCI IMOD setting helper for interrupters Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 14/51] xhci: sideband: add initial api to register a sideband entity Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 15/51] usb: host: xhci-sideband: Expose a sideband interrupter enable API Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 16/51] usb: host: xhci-mem: Cleanup pending secondary event ring events Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 17/51] usb: host: xhci-mem: Allow for interrupter clients to choose specific index Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 18/51] ASoC: Add SOC USB APIs for adding an USB backend Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 19/51] ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add USB_RX port Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 20/51] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 21/51] ASoC: qdsp6: q6afe: Increase APR timeout Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 22/51] ASoC: qcom: qdsp6: Add USB backend ASoC driver for Q6 Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 23/51] ALSA: usb-audio: Introduce USB SND platform op callbacks Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 24/51] ALSA: usb-audio: Export USB SND APIs for modules Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 25/51] ALSA: usb-audio: Save UAC sample size information Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 26/51] usb: dwc3: Specify maximum number of XHCI interrupters Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 27/51] usb: host: xhci-plat: Set XHCI max interrupters if property is present Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 28/51] ALSA: usb-audio: qcom: Add USB QMI definitions Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 29/51] ALSA: usb-audio: qcom: Introduce QC USB SND offloading support Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 30/51] ALSA: usb-audio: Check for support for requested audio format Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 31/51] ASoC: usb: Add PCM format check API for USB backend Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 32/51] ASoC: qcom: qdsp6: Ensure PCM format is supported by USB audio device Wesley Cheng
2024-02-17  0:09 ` [PATCH v17 33/51] ALSA: usb-audio: Prevent starting of audio stream if in use Wesley Cheng
2024-02-17  0:10 ` [PATCH v17 34/51] ALSA: usb-audio: Do not allow USB offload path if PCM device is " Wesley Cheng
2024-02-17  0:10 ` [PATCH v17 35/51] ASoC: dt-bindings: Add Q6USB backend Wesley Cheng
2024-02-17  0:10 ` [PATCH v17 36/51] ASoC: dt-bindings: Update example for enabling USB offload on SM8250 Wesley Cheng
2024-02-22 16:24   ` Krzysztof Kozlowski
2024-02-22 16:50     ` Mark Brown
2024-02-23  5:59       ` Greg KH
2024-02-23  6:23         ` Greg KH
2024-02-17  0:10 ` [PATCH v17 37/51] ALSA: usb-audio: qcom: Populate PCM and USB chip information Wesley Cheng
2024-02-17  0:10 ` [PATCH v17 38/51] ASoC: qcom: qdsp6: Add support to track available USB PCM devices Wesley Cheng
2024-02-17  0:10 ` [PATCH v17 39/51] ASoC: Introduce SND kcontrols to select sound card and PCM device Wesley Cheng
2024-02-17  0:10 ` [PATCH v17 40/51] ASoC: qcom: qdsp6: Add SOC USB offload select get/put callbacks Wesley Cheng
2024-02-17  0:10 ` [PATCH v17 41/51] ASoC: Introduce SND kcontrols to track USB offloading state Wesley Cheng
2024-02-17  0:10 ` [PATCH v17 42/51] ASoC: qcom: qdsp6: Add PCM ops to track current state Wesley Cheng
2024-02-17  0:10 ` [PATCH v17 43/51] ASoC: usb: Create SOC USB SND jack kcontrol Wesley Cheng
2024-02-17  0:10 ` [PATCH v17 44/51] ASoC: qcom: qdsp6: Add headphone jack for offload connection status Wesley Cheng
2024-02-17  0:10 ` [PATCH v17 45/51] ASoC: usb: Fetch ASoC sound card information Wesley Cheng
2024-02-17  0:10 ` [PATCH v17 46/51] ALSA: usb-audio: Add USB offloading capable kcontrol Wesley Cheng
2024-02-17  0:10 ` [PATCH v17 47/51] ALSA: usb-audio: Allow for rediscovery of connected USB SND devices Wesley Cheng
2024-02-17  0:10 ` [PATCH v17 48/51] ALSA: usb-audio: qcom: Use card and PCM index from QMI request Wesley Cheng
2024-02-17  0:10 ` [PATCH v17 49/51] ASoC: usb: Rediscover USB SND devices on USB port add Wesley Cheng
2024-02-17  0:10 ` [PATCH v17 50/51] ASoC: qcom: Populate SoC components string Wesley Cheng
2024-02-17  0:10 ` [PATCH v17 51/51] ASoC: doc: Add documentation for SOC USB Wesley Cheng
2024-02-17 15:25 ` [PATCH v17 00/51] Introduce QC USB SND audio offloading support Greg KH
2024-02-19 10:27   ` Mathias Nyman
2024-02-19 10:38     ` Greg KH
2024-02-19 11:03       ` Mathias Nyman
2024-02-19 19:56         ` Greg KH
2024-02-21 23:56     ` Wesley Cheng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240217001017.29969-4-quic_wcheng@quicinc.com \
    --to=quic_wcheng@quicinc.com \
    --cc=Thinh.Nguyen@synopsys.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=andersson@kernel.org \
    --cc=bgoswami@quicinc.com \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=corbet@lwn.net \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mathias.nyman@intel.com \
    --cc=mathias.nyman@linux.intel.com \
    --cc=perex@perex.cz \
    --cc=robh+dt@kernel.org \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.