All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ondřej Jirman" <megi@xff.cz>
To: linux-kernel@vger.kernel.org
Cc: Ondrej Jirman <megi@xff.cz>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Heiko Stuebner <heiko@sntech.de>,
	linux-clk@vger.kernel.org (open list:COMMON CLK FRAMEWORK),
	linux-arm-kernel@lists.infradead.org (moderated
	list:ARM/Rockchip SoC support),
	linux-rockchip@lists.infradead.org (open list:ARM/Rockchip SoC
	support)
Subject: [PATCH] clk: rk3399: Allow to set rate of clk_i2s0_frac's parent
Date: Sat, 17 Feb 2024 20:34:38 +0100	[thread overview]
Message-ID: <20240217193439.1762213-1-megi@xff.cz> (raw)

From: Ondrej Jirman <megi@xff.cz>

Otherwise when when clk_i2s0 muxes to clk_i2s0_div which requires
setting high divider value on clk_i2s0_div, and then muxes back to
clk_i2s0_frac, clk_i2s0_frac would have no way to change the
clk_i2s0_div's divider ratio back to 1 so that it can satisfy the
condition for m/n > 20 for fractional division to work correctly.

Bug is reproducible by playing 44.1k audio, then 48k audio, and then
44.1k audio again. This results in clk_i2s0_div being set to 49 and
clk_i2s0_frac not being able to cope with such a low input clock rate
and audio playing extremely slowly.

The identical issue is on i2s1 and i2s2 clocks, too.

Signed-off-by: Ondrej Jirman <megi@xff.cz>
---
 drivers/clk/rockchip/clk-rk3399.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c
index 5efac2ca3048..a17996acd065 100644
--- a/drivers/clk/rockchip/clk-rk3399.c
+++ b/drivers/clk/rockchip/clk-rk3399.c
@@ -597,7 +597,7 @@ static struct rockchip_clk_branch rk3399_clk_branches[] __initdata = {
 	COMPOSITE(0, "clk_i2s0_div", mux_pll_src_cpll_gpll_p, 0,
 			RK3399_CLKSEL_CON(28), 7, 1, MFLAGS, 0, 7, DFLAGS,
 			RK3399_CLKGATE_CON(8), 3, GFLAGS),
-	COMPOSITE_FRACMUX(0, "clk_i2s0_frac", "clk_i2s0_div", 0,
+	COMPOSITE_FRACMUX(0, "clk_i2s0_frac", "clk_i2s0_div", CLK_SET_RATE_PARENT,
 			RK3399_CLKSEL_CON(96), 0,
 			RK3399_CLKGATE_CON(8), 4, GFLAGS,
 			&rk3399_i2s0_fracmux),
@@ -607,7 +607,7 @@ static struct rockchip_clk_branch rk3399_clk_branches[] __initdata = {
 	COMPOSITE(0, "clk_i2s1_div", mux_pll_src_cpll_gpll_p, 0,
 			RK3399_CLKSEL_CON(29), 7, 1, MFLAGS, 0, 7, DFLAGS,
 			RK3399_CLKGATE_CON(8), 6, GFLAGS),
-	COMPOSITE_FRACMUX(0, "clk_i2s1_frac", "clk_i2s1_div", 0,
+	COMPOSITE_FRACMUX(0, "clk_i2s1_frac", "clk_i2s1_div", CLK_SET_RATE_PARENT,
 			RK3399_CLKSEL_CON(97), 0,
 			RK3399_CLKGATE_CON(8), 7, GFLAGS,
 			&rk3399_i2s1_fracmux),
@@ -617,7 +617,7 @@ static struct rockchip_clk_branch rk3399_clk_branches[] __initdata = {
 	COMPOSITE(0, "clk_i2s2_div", mux_pll_src_cpll_gpll_p, 0,
 			RK3399_CLKSEL_CON(30), 7, 1, MFLAGS, 0, 7, DFLAGS,
 			RK3399_CLKGATE_CON(8), 9, GFLAGS),
-	COMPOSITE_FRACMUX(0, "clk_i2s2_frac", "clk_i2s2_div", 0,
+	COMPOSITE_FRACMUX(0, "clk_i2s2_frac", "clk_i2s2_div", CLK_SET_RATE_PARENT,
 			RK3399_CLKSEL_CON(98), 0,
 			RK3399_CLKGATE_CON(8), 10, GFLAGS,
 			&rk3399_i2s2_fracmux),
-- 
2.43.0


WARNING: multiple messages have this Message-ID (diff)
From: "Ondřej Jirman" <megi@xff.cz>
To: linux-kernel@vger.kernel.org
Cc: Ondrej Jirman <megi@xff.cz>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Heiko Stuebner <heiko@sntech.de>,
	linux-clk@vger.kernel.org (open list:COMMON CLK FRAMEWORK),
	linux-arm-kernel@lists.infradead.org (moderated
	list:ARM/Rockchip SoC support),
	linux-rockchip@lists.infradead.org (open list:ARM/Rockchip SoC
	support)
Subject: [PATCH] clk: rk3399: Allow to set rate of clk_i2s0_frac's parent
Date: Sat, 17 Feb 2024 20:34:38 +0100	[thread overview]
Message-ID: <20240217193439.1762213-1-megi@xff.cz> (raw)

From: Ondrej Jirman <megi@xff.cz>

Otherwise when when clk_i2s0 muxes to clk_i2s0_div which requires
setting high divider value on clk_i2s0_div, and then muxes back to
clk_i2s0_frac, clk_i2s0_frac would have no way to change the
clk_i2s0_div's divider ratio back to 1 so that it can satisfy the
condition for m/n > 20 for fractional division to work correctly.

Bug is reproducible by playing 44.1k audio, then 48k audio, and then
44.1k audio again. This results in clk_i2s0_div being set to 49 and
clk_i2s0_frac not being able to cope with such a low input clock rate
and audio playing extremely slowly.

The identical issue is on i2s1 and i2s2 clocks, too.

Signed-off-by: Ondrej Jirman <megi@xff.cz>
---
 drivers/clk/rockchip/clk-rk3399.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c
index 5efac2ca3048..a17996acd065 100644
--- a/drivers/clk/rockchip/clk-rk3399.c
+++ b/drivers/clk/rockchip/clk-rk3399.c
@@ -597,7 +597,7 @@ static struct rockchip_clk_branch rk3399_clk_branches[] __initdata = {
 	COMPOSITE(0, "clk_i2s0_div", mux_pll_src_cpll_gpll_p, 0,
 			RK3399_CLKSEL_CON(28), 7, 1, MFLAGS, 0, 7, DFLAGS,
 			RK3399_CLKGATE_CON(8), 3, GFLAGS),
-	COMPOSITE_FRACMUX(0, "clk_i2s0_frac", "clk_i2s0_div", 0,
+	COMPOSITE_FRACMUX(0, "clk_i2s0_frac", "clk_i2s0_div", CLK_SET_RATE_PARENT,
 			RK3399_CLKSEL_CON(96), 0,
 			RK3399_CLKGATE_CON(8), 4, GFLAGS,
 			&rk3399_i2s0_fracmux),
@@ -607,7 +607,7 @@ static struct rockchip_clk_branch rk3399_clk_branches[] __initdata = {
 	COMPOSITE(0, "clk_i2s1_div", mux_pll_src_cpll_gpll_p, 0,
 			RK3399_CLKSEL_CON(29), 7, 1, MFLAGS, 0, 7, DFLAGS,
 			RK3399_CLKGATE_CON(8), 6, GFLAGS),
-	COMPOSITE_FRACMUX(0, "clk_i2s1_frac", "clk_i2s1_div", 0,
+	COMPOSITE_FRACMUX(0, "clk_i2s1_frac", "clk_i2s1_div", CLK_SET_RATE_PARENT,
 			RK3399_CLKSEL_CON(97), 0,
 			RK3399_CLKGATE_CON(8), 7, GFLAGS,
 			&rk3399_i2s1_fracmux),
@@ -617,7 +617,7 @@ static struct rockchip_clk_branch rk3399_clk_branches[] __initdata = {
 	COMPOSITE(0, "clk_i2s2_div", mux_pll_src_cpll_gpll_p, 0,
 			RK3399_CLKSEL_CON(30), 7, 1, MFLAGS, 0, 7, DFLAGS,
 			RK3399_CLKGATE_CON(8), 9, GFLAGS),
-	COMPOSITE_FRACMUX(0, "clk_i2s2_frac", "clk_i2s2_div", 0,
+	COMPOSITE_FRACMUX(0, "clk_i2s2_frac", "clk_i2s2_div", CLK_SET_RATE_PARENT,
 			RK3399_CLKSEL_CON(98), 0,
 			RK3399_CLKGATE_CON(8), 10, GFLAGS,
 			&rk3399_i2s2_fracmux),
-- 
2.43.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

WARNING: multiple messages have this Message-ID (diff)
From: "Ondřej Jirman" <megi@xff.cz>
To: linux-kernel@vger.kernel.org
Cc: Ondrej Jirman <megi@xff.cz>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Heiko Stuebner <heiko@sntech.de>,
	linux-clk@vger.kernel.org (open list:COMMON CLK FRAMEWORK),
	linux-arm-kernel@lists.infradead.org (moderated
	list:ARM/Rockchip SoC support),
	linux-rockchip@lists.infradead.org (open list:ARM/Rockchip SoC
	support)
Subject: [PATCH] clk: rk3399: Allow to set rate of clk_i2s0_frac's parent
Date: Sat, 17 Feb 2024 20:34:38 +0100	[thread overview]
Message-ID: <20240217193439.1762213-1-megi@xff.cz> (raw)

From: Ondrej Jirman <megi@xff.cz>

Otherwise when when clk_i2s0 muxes to clk_i2s0_div which requires
setting high divider value on clk_i2s0_div, and then muxes back to
clk_i2s0_frac, clk_i2s0_frac would have no way to change the
clk_i2s0_div's divider ratio back to 1 so that it can satisfy the
condition for m/n > 20 for fractional division to work correctly.

Bug is reproducible by playing 44.1k audio, then 48k audio, and then
44.1k audio again. This results in clk_i2s0_div being set to 49 and
clk_i2s0_frac not being able to cope with such a low input clock rate
and audio playing extremely slowly.

The identical issue is on i2s1 and i2s2 clocks, too.

Signed-off-by: Ondrej Jirman <megi@xff.cz>
---
 drivers/clk/rockchip/clk-rk3399.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c
index 5efac2ca3048..a17996acd065 100644
--- a/drivers/clk/rockchip/clk-rk3399.c
+++ b/drivers/clk/rockchip/clk-rk3399.c
@@ -597,7 +597,7 @@ static struct rockchip_clk_branch rk3399_clk_branches[] __initdata = {
 	COMPOSITE(0, "clk_i2s0_div", mux_pll_src_cpll_gpll_p, 0,
 			RK3399_CLKSEL_CON(28), 7, 1, MFLAGS, 0, 7, DFLAGS,
 			RK3399_CLKGATE_CON(8), 3, GFLAGS),
-	COMPOSITE_FRACMUX(0, "clk_i2s0_frac", "clk_i2s0_div", 0,
+	COMPOSITE_FRACMUX(0, "clk_i2s0_frac", "clk_i2s0_div", CLK_SET_RATE_PARENT,
 			RK3399_CLKSEL_CON(96), 0,
 			RK3399_CLKGATE_CON(8), 4, GFLAGS,
 			&rk3399_i2s0_fracmux),
@@ -607,7 +607,7 @@ static struct rockchip_clk_branch rk3399_clk_branches[] __initdata = {
 	COMPOSITE(0, "clk_i2s1_div", mux_pll_src_cpll_gpll_p, 0,
 			RK3399_CLKSEL_CON(29), 7, 1, MFLAGS, 0, 7, DFLAGS,
 			RK3399_CLKGATE_CON(8), 6, GFLAGS),
-	COMPOSITE_FRACMUX(0, "clk_i2s1_frac", "clk_i2s1_div", 0,
+	COMPOSITE_FRACMUX(0, "clk_i2s1_frac", "clk_i2s1_div", CLK_SET_RATE_PARENT,
 			RK3399_CLKSEL_CON(97), 0,
 			RK3399_CLKGATE_CON(8), 7, GFLAGS,
 			&rk3399_i2s1_fracmux),
@@ -617,7 +617,7 @@ static struct rockchip_clk_branch rk3399_clk_branches[] __initdata = {
 	COMPOSITE(0, "clk_i2s2_div", mux_pll_src_cpll_gpll_p, 0,
 			RK3399_CLKSEL_CON(30), 7, 1, MFLAGS, 0, 7, DFLAGS,
 			RK3399_CLKGATE_CON(8), 9, GFLAGS),
-	COMPOSITE_FRACMUX(0, "clk_i2s2_frac", "clk_i2s2_div", 0,
+	COMPOSITE_FRACMUX(0, "clk_i2s2_frac", "clk_i2s2_div", CLK_SET_RATE_PARENT,
 			RK3399_CLKSEL_CON(98), 0,
 			RK3399_CLKGATE_CON(8), 10, GFLAGS,
 			&rk3399_i2s2_fracmux),
-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2024-02-17 19:34 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-17 19:34 Ondřej Jirman [this message]
2024-02-17 19:34 ` [PATCH] clk: rk3399: Allow to set rate of clk_i2s0_frac's parent Ondřej Jirman
2024-02-17 19:34 ` Ondřej Jirman
2024-02-27 23:13 ` Heiko Stuebner
2024-02-27 23:13   ` Heiko Stuebner
2024-02-27 23:13   ` Heiko Stuebner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240217193439.1762213-1-megi@xff.cz \
    --to=megi@xff.cz \
    --cc=heiko@sntech.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mturquette@baylibre.com \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.