All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: linux-iio@vger.kernel.org,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: "Lars-Peter Clausen" <lars@metafoo.de>,
	"Michael Hennerich" <Michael.Hennerich@analog.com>,
	"Nuno Sá" <nuno.sa@analog.com>,
	"Alisa-Dariana Roman" <alisa.roman@analog.com>,
	"Haibo Chen" <haibo.chen@nxp.com>,
	"Sean Nyekjaer" <sean@geanix.com>,
	"Andreas Klinger" <ak@it-klinger.de>,
	"Jonathan Cameron" <Jonathan.Cameron@huawei.com>
Subject: [PATCH 2/8] iio: adc: fsl-imx25-gcq: Use devm_* and dev_err_probe() to simplify probe
Date: Sun, 18 Feb 2024 17:27:25 +0000	[thread overview]
Message-ID: <20240218172731.1023367-3-jic23@kernel.org> (raw)
In-Reply-To: <20240218172731.1023367-1-jic23@kernel.org>

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Custom callbacks are need for regulators (so there is a handle to read
the voltage from) and the clk because it is retrieved from the parent
rather than directly from firmware description.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/adc/fsl-imx25-gcq.c | 86 ++++++++++++++-------------------
 1 file changed, 35 insertions(+), 51 deletions(-)

diff --git a/drivers/iio/adc/fsl-imx25-gcq.c b/drivers/iio/adc/fsl-imx25-gcq.c
index 534e73a24eb4..394396b91630 100644
--- a/drivers/iio/adc/fsl-imx25-gcq.c
+++ b/drivers/iio/adc/fsl-imx25-gcq.c
@@ -282,6 +282,17 @@ static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
 	return 0;
 }
 
+static void mx25_gcq_reg_disable(void *reg)
+{
+	regulator_disable(reg);
+}
+
+/* Custom handling needed as this driver doesn't own the clock */
+static void mx25_gcq_clk_disable(void *clk)
+{
+	clk_disable_unprepare(clk);
+}
+
 static int mx25_gcq_probe(struct platform_device *pdev)
 {
 	struct iio_dev *indio_dev;
@@ -303,10 +314,9 @@ static int mx25_gcq_probe(struct platform_device *pdev)
 		return PTR_ERR(mem);
 
 	priv->regs = devm_regmap_init_mmio(dev, mem, &mx25_gcq_regconfig);
-	if (IS_ERR(priv->regs)) {
-		dev_err(dev, "Failed to initialize regmap\n");
-		return PTR_ERR(priv->regs);
-	}
+	if (IS_ERR(priv->regs))
+		return dev_err_probe(dev, PTR_ERR(priv->regs),
+				     "Failed to initialize regmap\n");
 
 	mutex_init(&priv->lock);
 
@@ -322,69 +332,44 @@ static int mx25_gcq_probe(struct platform_device *pdev)
 
 		ret = regulator_enable(priv->vref[i]);
 		if (ret)
-			goto err_regulator_disable;
+			return ret;
+
+		ret = devm_add_action_or_reset(dev, mx25_gcq_reg_disable,
+					       priv->vref[i]);
+		if (ret)
+			return ret;
 	}
 
 	priv->clk = tsadc->clk;
 	ret = clk_prepare_enable(priv->clk);
-	if (ret) {
-		dev_err(dev, "Failed to enable clock\n");
-		goto err_vref_disable;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to enable clock\n");
+
+	ret = devm_add_action_or_reset(dev, mx25_gcq_clk_disable,
+				       priv->clk);
+	if (ret)
+		return ret;
 
 	ret = platform_get_irq(pdev, 0);
 	if (ret < 0)
-		goto err_clk_unprepare;
+		return ret;
 
 	priv->irq = ret;
-	ret = request_irq(priv->irq, mx25_gcq_irq, 0, pdev->name, priv);
-	if (ret) {
-		dev_err(dev, "Failed requesting IRQ\n");
-		goto err_clk_unprepare;
-	}
+	ret = devm_request_irq(dev, priv->irq, mx25_gcq_irq, 0, pdev->name,
+			       priv);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed requesting IRQ\n");
 
 	indio_dev->channels = mx25_gcq_channels;
 	indio_dev->num_channels = ARRAY_SIZE(mx25_gcq_channels);
 	indio_dev->info = &mx25_gcq_iio_info;
 	indio_dev->name = driver_name;
 
-	ret = iio_device_register(indio_dev);
-	if (ret) {
-		dev_err(dev, "Failed to register iio device\n");
-		goto err_irq_free;
-	}
-
-	platform_set_drvdata(pdev, indio_dev);
+	ret = devm_iio_device_register(dev, indio_dev);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to register iio device\n");
 
 	return 0;
-
-err_irq_free:
-	free_irq(priv->irq, priv);
-err_clk_unprepare:
-	clk_disable_unprepare(priv->clk);
-err_vref_disable:
-	i = 4;
-err_regulator_disable:
-	for (; i-- > 0;) {
-		if (priv->vref[i])
-			regulator_disable(priv->vref[i]);
-	}
-	return ret;
-}
-
-static void mx25_gcq_remove(struct platform_device *pdev)
-{
-	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
-	struct mx25_gcq_priv *priv = iio_priv(indio_dev);
-	int i;
-
-	iio_device_unregister(indio_dev);
-	free_irq(priv->irq, priv);
-	clk_disable_unprepare(priv->clk);
-	for (i = 4; i-- > 0;) {
-		if (priv->vref[i])
-			regulator_disable(priv->vref[i]);
-	}
 }
 
 static const struct of_device_id mx25_gcq_ids[] = {
@@ -399,7 +384,6 @@ static struct platform_driver mx25_gcq_driver = {
 		.of_match_table = mx25_gcq_ids,
 	},
 	.probe		= mx25_gcq_probe,
-	.remove_new	= mx25_gcq_remove,
 };
 module_platform_driver(mx25_gcq_driver);
 
-- 
2.43.2


  parent reply	other threads:[~2024-02-18 17:27 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-18 17:27 [PATCH 0/8] IIO: Convert DT specific handling over to fwnode Jonathan Cameron
2024-02-18 17:27 ` [PATCH 1/8] iio: adc: fsl-imx25-gcq: Switch from of specific handing to fwnode based Jonathan Cameron
2024-02-18 17:27 ` Jonathan Cameron [this message]
2024-02-18 17:27 ` [PATCH 3/8] iio: adc: ad7124: Switch from of specific to fwnode based property handling Jonathan Cameron
2024-02-19  9:24   ` Nuno Sá
2024-02-19 11:59     ` Andy Shevchenko
2024-02-19 11:58   ` Andy Shevchenko
2024-02-24 15:19     ` Jonathan Cameron
2024-02-18 17:27 ` [PATCH 4/8] iio: adc: ad7292: Switch from of specific to fwnode " Jonathan Cameron
2024-02-19  9:26   ` Nuno Sá
2024-02-18 17:27 ` [PATCH 5/8] iio: adc: ad7192: Convert " Jonathan Cameron
2024-02-19  9:30   ` Nuno Sá
2024-02-19 12:02   ` Andy Shevchenko
2024-02-18 17:27 ` [PATCH 6/8] iio: accel: mma8452: Switch " Jonathan Cameron
2024-02-23 11:10   ` Bough Chen
2024-02-18 17:27 ` [PATCH 7/8] iio: accel: fxls8962af: Switch from of specific to fwnode based properties Jonathan Cameron
2024-02-19 12:03   ` Andy Shevchenko
2024-02-18 17:27 ` [PATCH 8/8] iio: adc: hx711: Switch from of specific to fwnode property handling Jonathan Cameron
2024-02-19 12:06   ` Andy Shevchenko
2024-02-19 12:06 ` [PATCH 0/8] IIO: Convert DT specific handling over to fwnode Andy Shevchenko
2024-02-24 15:31   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240218172731.1023367-3-jic23@kernel.org \
    --to=jic23@kernel.org \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=ak@it-klinger.de \
    --cc=alisa.roman@analog.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=haibo.chen@nxp.com \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=nuno.sa@analog.com \
    --cc=sean@geanix.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.