[PATCH 6/8] iio: accel: mma8452: Switch from of specific to fwnode property handling.

[Jonathan Cameron <jic23@kernel.org>]

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

In this case only use was to get an irq so easily converted.
Also include linux/mod_devicetable.h for struct of_device_id definition.

Using the generic firmware handling, this driver may be used with other
firmware types. This also removes an example that might get copied into
other drivers leaving them unable to be used with alternative firmware
types.

Cc: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/accel/mma8452.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index d3fd0318e47b..62e6369e2269 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -19,6 +19,8 @@
  */
 
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/property.h>
 #include <linux/i2c.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -28,8 +30,6 @@
 #include <linux/iio/triggered_buffer.h>
 #include <linux/iio/events.h>
 #include <linux/delay.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 
@@ -1642,7 +1642,7 @@ static int mma8452_probe(struct i2c_client *client)
 	if (client->irq) {
 		int irq2;
 
-		irq2 = of_irq_get_byname(client->dev.of_node, "INT2");
+		irq2 = fwnode_irq_get_byname(dev_fwnode(&client->dev), "INT2");
 
 		if (irq2 == client->irq) {
 			dev_dbg(&client->dev, "using interrupt line INT2\n");
-- 
2.43.2