[GIT PULL 2/4] arm64: dts: samsung: exynos and google for v6.9

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

The following changes since commit 6613476e225e090cc9aad49be7fa504e290dd33d:

  Linux 6.8-rc1 (2024-01-21 14:11:32 -0800)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-dt64-6.9

for you to fetch changes up to 0791f541ff42f0ba7301f8caa7f3ab257284dc8f:

  arm64: dts: fsd: Add fifosize for UART in Device Tree (2024-02-12 14:21:29 +0100)

----------------------------------------------------------------
Samsung DTS ARM64 changes for v6.9

Mostly work around Google GS101 SoC and Pixel phone (Oriole) adding
support for:

1. Multi Core Timer (MCT) clocksource.
2. Several clock controllers (DTS and DT bindings) and use new clocks in
   several other device nodes.
3. More serial-interface instances: USI8 and USI12 with I2C.

Exynos850:
1. SPI and DMA controllers (PL330).

----------------------------------------------------------------
André Draszik (7):
      arm64: dts: exynos: gs101: sysreg_peric0 needs a clock
      arm64: dts: exynos: gs101: use correct clocks for usi8
      arm64: dts: exynos: gs101: use correct clocks for usi_uart
      dt-bindings: clock: google,gs101-clock: add PERIC1 clock management unit
      arm64: dts: exynos: gs101: enable cmu-peric1 clock controller
      arm64: dts: exynos: gs101: define USI12 with I2C configuration
      arm64: dts: exynos: gs101: enable i2c bus 12 on gs101-oriole

Krzysztof Kozlowski (2):
      Merge tag 'samsung-dt-bindings-clk-6.9-3' into next/dt64
      arm64: dts: exynos: gs101: minor whitespace cleanup

Peter Griffin (1):
      arm64: dts: exynos: gs101: define Multi Core Timer (MCT) node

Sam Protsenko (3):
      dt-bindings: clock: exynos850: Add PDMA clocks
      arm64: dts: exynos: Add PDMA node for Exynos850
      arm64: dts: exynos: Add SPI nodes for Exynos850

Tamseel Shams (1):
      arm64: dts: fsd: Add fifosize for UART in Device Tree

Tudor Ambarus (6):
      dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit
      arm64: dts: exynos: gs101: remove reg-io-width from serial
      arm64: dts: exynos: gs101: enable cmu-peric0 clock controller
      arm64: dts: exynos: gs101: update USI UART to use peric0 clocks
      arm64: dts: exynos: gs101: define USI8 with I2C configuration
      arm64: dts: exynos: gs101: enable eeprom on gs101-oriole

 .../bindings/clock/google,gs101-clock.yaml         |  28 ++++-
 arch/arm64/boot/dts/exynos/exynos850.dtsi          |  64 ++++++++++
 arch/arm64/boot/dts/exynos/google/gs101-oriole.dts |  24 ++++
 .../boot/dts/exynos/google/gs101-pinctrl.dtsi      |   2 +-
 arch/arm64/boot/dts/exynos/google/gs101.dtsi       | 131 ++++++++++++++++++---
 arch/arm64/boot/dts/tesla/fsd.dtsi                 |   2 +
 include/dt-bindings/clock/exynos850.h              |   2 +
 include/dt-bindings/clock/google,gs101.h           | 129 ++++++++++++++++++++
 8 files changed, 360 insertions(+), 22 deletions(-)