All of lore.kernel.org
 help / color / mirror / Atom feed
From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Bjorn Andersson <andersson@kernel.org>,
	 Michael Turquette <mturquette@baylibre.com>,
	 Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh@kernel.org>,
	 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	 Conor Dooley <conor+dt@kernel.org>
Cc: Marijn Suijten <marijn.suijten@somainline.org>,
	 Konrad Dybcio <konradybcio@kernel.org>,
	linux-arm-msm@vger.kernel.org,  linux-clk@vger.kernel.org,
	devicetree@vger.kernel.org,  linux-kernel@vger.kernel.org,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	 Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Subject: [PATCH v3 3/5] clk: qcom: Add QCM2290 GPU clock controller driver
Date: Tue, 26 Mar 2024 22:08:25 +0100	[thread overview]
Message-ID: <20240219-topic-rb1_gpu-v3-3-86f67786539a@linaro.org> (raw)
In-Reply-To: <20240219-topic-rb1_gpu-v3-0-86f67786539a@linaro.org>

Add a driver for the GPU clock controller block found on the QCM2290 SoC.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/clk/qcom/Kconfig         |   9 +
 drivers/clk/qcom/Makefile        |   1 +
 drivers/clk/qcom/gpucc-qcm2290.c | 423 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 433 insertions(+)

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 8ab08e7b5b6c..c7ec41a6bd7f 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -65,6 +65,15 @@ config CLK_X1E80100_TCSRCC
 	  Support for the TCSR clock controller on X1E80100 devices.
 	  Say Y if you want to use peripheral devices such as SD/UFS.
 
+config CLK_QCM2290_GPUCC
+	tristate "QCM2290 Graphics Clock Controller"
+	depends on ARM64 || COMPILE_TEST
+	select CLK_QCM2290_GCC
+	help
+	  Support for the graphics clock controller on QCM2290 devices.
+	  Say Y if you want to support graphics controller devices and
+	  functionality such as 3D graphics.
+
 config QCOM_A53PLL
 	tristate "MSM8916 A53 PLL"
 	help
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index dec5b6db6860..cee261eb5144 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_CLK_X1E80100_DISPCC) += dispcc-x1e80100.o
 obj-$(CONFIG_CLK_X1E80100_GCC) += gcc-x1e80100.o
 obj-$(CONFIG_CLK_X1E80100_GPUCC) += gpucc-x1e80100.o
 obj-$(CONFIG_CLK_X1E80100_TCSRCC) += tcsrcc-x1e80100.o
+obj-$(CONFIG_CLK_QCM2290_GPUCC) += gpucc-qcm2290.o
 obj-$(CONFIG_IPQ_APSS_PLL) += apss-ipq-pll.o
 obj-$(CONFIG_IPQ_APSS_6018) += apss-ipq6018.o
 obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o
diff --git a/drivers/clk/qcom/gpucc-qcm2290.c b/drivers/clk/qcom/gpucc-qcm2290.c
new file mode 100644
index 000000000000..b6e20d63ac85
--- /dev/null
+++ b/drivers/clk/qcom/gpucc-qcm2290.c
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2024, Linaro Limited
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,qcm2290-gpucc.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "clk-regmap-divider.h"
+#include "clk-regmap-mux.h"
+#include "clk-regmap-phy-mux.h"
+#include "gdsc.h"
+#include "reset.h"
+
+enum {
+	DT_GCC_AHB_CLK,
+	DT_BI_TCXO,
+	DT_GCC_GPU_GPLL0_CLK_SRC,
+	DT_GCC_GPU_GPLL0_DIV_CLK_SRC,
+};
+
+enum {
+	P_BI_TCXO,
+	P_GPLL0_OUT_MAIN,
+	P_GPLL0_OUT_MAIN_DIV,
+	P_GPU_CC_PLL0_2X_DIV_CLK_SRC,
+	P_GPU_CC_PLL0_OUT_AUX,
+	P_GPU_CC_PLL0_OUT_AUX2,
+	P_GPU_CC_PLL0_OUT_MAIN,
+};
+
+static const struct pll_vco huayra_vco[] = {
+	{ 600000000, 3300000000, 0 },
+	{ 600000000, 2200000000, 1 },
+};
+
+static const struct alpha_pll_config gpu_cc_pll0_config = {
+	.l = 0x25,
+	.config_ctl_val = 0x200d4828,
+	.config_ctl_hi_val = 0x6,
+	.test_ctl_val = GENMASK(28, 26),
+	.test_ctl_hi_val = BIT(14),
+	.user_ctl_val = 0xf,
+};
+
+static struct clk_alpha_pll gpu_cc_pll0 = {
+	.offset = 0x0,
+	.vco_table = huayra_vco,
+	.num_vco = ARRAY_SIZE(huayra_vco),
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_HUAYRA_2290],
+	.clkr = {
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_pll0",
+			.parent_data = &(const struct clk_parent_data) {
+				.index = DT_BI_TCXO,
+			},
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_huayra_ops,
+		},
+	},
+};
+
+static const struct parent_map gpu_cc_parent_map_0[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_GPU_CC_PLL0_OUT_MAIN, 1 },
+	{ P_GPLL0_OUT_MAIN, 5 },
+	{ P_GPLL0_OUT_MAIN_DIV, 6 },
+};
+
+static const struct clk_parent_data gpu_cc_parent_data_0[] = {
+	{ .index = DT_BI_TCXO, },
+	{ .hw = &gpu_cc_pll0.clkr.hw, },
+	{ .index = DT_GCC_GPU_GPLL0_CLK_SRC, },
+	{ .index = DT_GCC_GPU_GPLL0_DIV_CLK_SRC, },
+};
+
+static const struct parent_map gpu_cc_parent_map_1[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_GPU_CC_PLL0_2X_DIV_CLK_SRC, 1 },
+	{ P_GPU_CC_PLL0_OUT_AUX2, 2 },
+	{ P_GPU_CC_PLL0_OUT_AUX, 3 },
+	{ P_GPLL0_OUT_MAIN, 5 },
+};
+
+static const struct clk_parent_data gpu_cc_parent_data_1[] = {
+	{ .index = DT_BI_TCXO, },
+	{ .hw = &gpu_cc_pll0.clkr.hw, },
+	{ .hw = &gpu_cc_pll0.clkr.hw, },
+	{ .hw = &gpu_cc_pll0.clkr.hw, },
+	{ .index = DT_GCC_GPU_GPLL0_CLK_SRC, },
+};
+
+static const struct freq_tbl ftbl_gpu_cc_gmu_clk_src[] = {
+	F(200000000, P_GPLL0_OUT_MAIN, 3, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gpu_cc_gmu_clk_src = {
+	.cmd_rcgr = 0x1120,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gpu_cc_parent_map_0,
+	.freq_tbl = ftbl_gpu_cc_gmu_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gpu_cc_gmu_clk_src",
+		.parent_data = gpu_cc_parent_data_0,
+		.num_parents = ARRAY_SIZE(gpu_cc_parent_data_0),
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_shared_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gpu_cc_gx_gfx3d_clk_src[] = {
+	F(355200000, P_GPU_CC_PLL0_OUT_AUX, 2, 0, 0),
+	F(537600000, P_GPU_CC_PLL0_OUT_AUX2, 2, 0, 0),
+	F(672000000, P_GPU_CC_PLL0_OUT_AUX2, 2, 0, 0),
+	F(844800000, P_GPU_CC_PLL0_OUT_AUX2, 2, 0, 0),
+	F(921600000, P_GPU_CC_PLL0_OUT_AUX2, 2, 0, 0),
+	F(1017600000, P_GPU_CC_PLL0_OUT_AUX2, 2, 0, 0),
+	F(1123200000, P_GPU_CC_PLL0_OUT_AUX2, 2, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gpu_cc_gx_gfx3d_clk_src = {
+	.cmd_rcgr = 0x101c,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gpu_cc_parent_map_1,
+	.freq_tbl = ftbl_gpu_cc_gx_gfx3d_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gpu_cc_gx_gfx3d_clk_src",
+		.parent_data = gpu_cc_parent_data_1,
+		.num_parents = ARRAY_SIZE(gpu_cc_parent_data_1),
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_branch gpu_cc_ahb_clk = {
+	.halt_reg = 0x1078,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x1078,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_ahb_clk",
+			.flags = CLK_IS_CRITICAL,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_crc_ahb_clk = {
+	.halt_reg = 0x107c,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x107c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_crc_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_cx_gfx3d_clk = {
+	.halt_reg = 0x10a4,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x10a4,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_cx_gfx3d_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gpu_cc_gx_gfx3d_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_cx_gmu_clk = {
+	.halt_reg = 0x1098,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1098,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_cx_gmu_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gpu_cc_gmu_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_cx_snoc_dvm_clk = {
+	.halt_reg = 0x108c,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x108c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_cx_snoc_dvm_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_cxo_aon_clk = {
+	.halt_reg = 0x1004,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x1004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_cxo_aon_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_cxo_clk = {
+	.halt_reg = 0x109c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x109c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_cxo_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_gx_gfx3d_clk = {
+	.halt_reg = 0x1054,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x1054,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_gx_gfx3d_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gpu_cc_gx_gfx3d_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_sleep_clk = {
+	.halt_reg = 0x1090,
+	.halt_check = BRANCH_VOTED,
+	.clkr = {
+		.enable_reg = 0x1090,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_sleep_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_hlos1_vote_gpu_smmu_clk = {
+	.halt_reg = 0x5000,
+	.halt_check = BRANCH_VOTED,
+	.clkr = {
+		.enable_reg = 0x5000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			 .name = "gpu_cc_hlos1_vote_gpu_smmu_clk",
+			 .ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct gdsc gpu_cx_gdsc = {
+	.gdscr = 0x106c,
+	.gds_hw_ctrl = 0x1540,
+	.pd = {
+		.name = "gpu_cx_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = VOTABLE,
+};
+
+static struct gdsc gpu_gx_gdsc = {
+	.gdscr = 0x100c,
+	.clamp_io_ctrl = 0x1508,
+	.resets = (unsigned int []){ GPU_GX_BCR },
+	.reset_count = 1,
+	.pd = {
+		.name = "gpu_gx_gdsc",
+	},
+	.parent = &gpu_cx_gdsc.pd,
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = CLAMP_IO | AON_RESET | SW_RESET,
+};
+
+static struct clk_regmap *gpu_cc_qcm2290_clocks[] = {
+	[GPU_CC_AHB_CLK] = &gpu_cc_ahb_clk.clkr,
+	[GPU_CC_CRC_AHB_CLK] = &gpu_cc_crc_ahb_clk.clkr,
+	[GPU_CC_CX_GFX3D_CLK] = &gpu_cc_cx_gfx3d_clk.clkr,
+	[GPU_CC_CX_GMU_CLK] = &gpu_cc_cx_gmu_clk.clkr,
+	[GPU_CC_CX_SNOC_DVM_CLK] = &gpu_cc_cx_snoc_dvm_clk.clkr,
+	[GPU_CC_CXO_AON_CLK] = &gpu_cc_cxo_aon_clk.clkr,
+	[GPU_CC_CXO_CLK] = &gpu_cc_cxo_clk.clkr,
+	[GPU_CC_GMU_CLK_SRC] = &gpu_cc_gmu_clk_src.clkr,
+	[GPU_CC_GX_GFX3D_CLK] = &gpu_cc_gx_gfx3d_clk.clkr,
+	[GPU_CC_GX_GFX3D_CLK_SRC] = &gpu_cc_gx_gfx3d_clk_src.clkr,
+	[GPU_CC_PLL0] = &gpu_cc_pll0.clkr,
+	[GPU_CC_SLEEP_CLK] = &gpu_cc_sleep_clk.clkr,
+	[GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK] = &gpu_cc_hlos1_vote_gpu_smmu_clk.clkr,
+};
+
+static const struct qcom_reset_map gpu_cc_qcm2290_resets[] = {
+	[GPU_GX_BCR] = { 0x1008 },
+};
+
+static struct gdsc *gpu_cc_qcm2290_gdscs[] = {
+	[GPU_CX_GDSC] = &gpu_cx_gdsc,
+	[GPU_GX_GDSC] = &gpu_gx_gdsc,
+};
+
+static const struct regmap_config gpu_cc_qcm2290_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.max_register = 0x9000,
+	.fast_io = true,
+};
+
+
+static const struct qcom_cc_desc gpu_cc_qcm2290_desc = {
+	.config = &gpu_cc_qcm2290_regmap_config,
+	.clks = gpu_cc_qcm2290_clocks,
+	.num_clks = ARRAY_SIZE(gpu_cc_qcm2290_clocks),
+	.resets = gpu_cc_qcm2290_resets,
+	.num_resets = ARRAY_SIZE(gpu_cc_qcm2290_resets),
+	.gdscs = gpu_cc_qcm2290_gdscs,
+	.num_gdscs = ARRAY_SIZE(gpu_cc_qcm2290_gdscs),
+};
+
+static const struct of_device_id gpu_cc_qcm2290_match_table[] = {
+	{ .compatible = "qcom,qcm2290-gpucc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, gpu_cc_qcm2290_match_table);
+
+static int gpu_cc_qcm2290_probe(struct platform_device *pdev)
+{
+	struct regmap *regmap;
+	int ret;
+
+	regmap = qcom_cc_map(pdev, &gpu_cc_qcm2290_desc);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	ret = devm_pm_runtime_enable(&pdev->dev);
+	if (ret)
+		return ret;
+
+	ret = devm_pm_clk_create(&pdev->dev);
+	if (ret)
+		return ret;
+
+	ret = pm_clk_add(&pdev->dev, NULL);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to acquire ahb clock\n");
+		return ret;
+	}
+
+	ret = pm_runtime_resume_and_get(&pdev->dev);
+	if (ret)
+		return ret;
+
+	clk_huayra_2290_pll_configure(&gpu_cc_pll0, regmap, &gpu_cc_pll0_config);
+
+	regmap_update_bits(regmap, 0x1060, BIT(0), BIT(0)); /* GPU_CC_GX_CXO_CLK */
+
+	ret = qcom_cc_really_probe(pdev, &gpu_cc_qcm2290_desc, regmap);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register display clock controller\n");
+		goto out_pm_runtime_put;
+	}
+
+out_pm_runtime_put:
+	pm_runtime_put_sync(&pdev->dev);
+
+	return 0;
+}
+
+static struct platform_driver gpu_cc_qcm2290_driver = {
+	.probe = gpu_cc_qcm2290_probe,
+	.driver = {
+		.name = "gpucc-qcm2290",
+		.of_match_table = gpu_cc_qcm2290_match_table,
+	},
+};
+module_platform_driver(gpu_cc_qcm2290_driver);
+
+MODULE_DESCRIPTION("QTI QCM2290 GPU clock controller driver");
+MODULE_LICENSE("GPL");

-- 
2.44.0


  parent reply	other threads:[~2024-03-26 21:08 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-26 21:08 [PATCH v3 0/5] A702 support Konrad Dybcio
2024-03-26 21:08 ` [PATCH v3 1/5] dt-bindings: clock: Add Qcom QCM2290 GPUCC Konrad Dybcio
2024-03-26 21:08 ` [PATCH v3 2/5] clk: qcom: clk-alpha-pll: Add HUAYRA_2290 support Konrad Dybcio
2024-04-05 21:37   ` Stephen Boyd
2024-03-26 21:08 ` Konrad Dybcio [this message]
2024-03-26 21:08 ` [PATCH v3 4/5] arm64: dts: qcom: qcm2290: Add GPU nodes Konrad Dybcio
2024-03-26 21:08 ` [PATCH v3 5/5] arm64: dts: qcom: qrb2210-rb1: Enable the GPU Konrad Dybcio

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240219-topic-rb1_gpu-v3-3-86f67786539a@linaro.org \
    --to=konrad.dybcio@linaro.org \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=konradybcio@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marijn.suijten@somainline.org \
    --cc=mturquette@baylibre.com \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.