From: Abel Vesa <abel.vesa@linaro.org> To: Stephen Boyd <sboyd@kernel.org>, Matthias Brugger <matthias.bgg@gmail.com>, Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konrad.dybcio@linaro.org>, Dmitry Baryshkov <dmitry.baryshkov@linaro.org>, Neil Armstrong <neil.armstrong@linaro.org>, AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>, Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org> Cc: Srini Kandagatla <srinivas.kandagatla@linaro.org>, Johan Hovold <johan@kernel.org>, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-arm-msm@vger.kernel.org, linux-mediatek@lists.infradead.org, devicetree@vger.kernel.org, Abel Vesa <abel.vesa@linaro.org> Subject: [PATCH RFC v4 1/4] dt-bindings: spmi: Add PMIC ARB v7 schema Date: Tue, 20 Feb 2024 14:59:21 +0200 [thread overview] Message-ID: <20240220-spmi-multi-master-support-v4-1-dc813c878ba8@linaro.org> (raw) In-Reply-To: <20240220-spmi-multi-master-support-v4-0-dc813c878ba8@linaro.org> Add dedicated schema for PMIC ARB v7 as it allows multiple buses by declaring them as child nodes. These child nodes will follow the generic spmi bus bindings. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- .../bindings/spmi/qcom,spmi-pmic-arb-v7.yaml | 119 +++++++++++++++++++++ 1 file changed, 119 insertions(+) diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb-v7.yaml b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb-v7.yaml new file mode 100644 index 000000000000..8a93d2145aa5 --- /dev/null +++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb-v7.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spmi/qcom,spmi-pmic-arb-v7.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SPMI Controller v7 (PMIC Arbiter) + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + +description: | + The SPMI PMIC Arbiter v7 is found on Snapdragon chipsets. It is an SPMI + controller with wrapping arbitration logic to allow for multiple on-chip + devices to control up to 2 SPMI separate buses. + + The PMIC Arbiter can also act as an interrupt controller, providing interrupts + to slave devices. + +properties: + compatible: + const: qcom,spmi-pmic-arb-v7 + + reg: + items: + - description: core registers + - description: tx-channel per virtual slave regosters + - description: rx-channel (called observer) per virtual slave registers + + reg-names: + items: + - const: core + - const: chnls + - const: obsrvr + + ranges: true + + '#address-cells': + const: 2 + + '#size-cells': + const: 2 + + qcom,ee: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 5 + description: > + indicates the active Execution Environment identifier + + qcom,channel: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 5 + description: > + which of the PMIC Arb provided channels to use for accesses + +patternProperties: + "spmi@[0-1]$": + type: object + $ref: /schemas/spmi/spmi.yaml + +required: + - compatible + - reg-names + - qcom,ee + - qcom,channel + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + spmi: arbiter@c400000 { + compatible = "qcom,spmi-pmic-arb-v7"; + reg = <0x0c400000 0x3000>, + <0x0c500000 0x4000000>, + <0x0c440000 0x80000>; + reg-names = "core", "chnls", "obsrvr"; + + qcom,ee = <0>; + qcom,channel = <0>; + + #address-cells = <2>; + #size-cells = <2>; + + spmi_bus0: spmi@0 { + reg = <0 0x0c42d000 0 0x4000>, + <0 0x0c4c0000 0 0x10000>; + reg-names = "cnfg", "intr"; + + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <4>; + + qcom,bus-id = <0>; + + #address-cells = <2>; + #size-cells = <0>; + }; + + spmi_bus1: spmi@1 { + reg = <0 0x0c432000 0 0x4000>, + <0 0x0c4d0000 0 0x10000>; + reg-names = "cnfg", "intr"; + + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 3 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <4>; + + qcom,bus-id = <1>; + + #address-cells = <2>; + #size-cells = <0>; + }; + }; -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Abel Vesa <abel.vesa@linaro.org> To: Stephen Boyd <sboyd@kernel.org>, Matthias Brugger <matthias.bgg@gmail.com>, Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konrad.dybcio@linaro.org>, Dmitry Baryshkov <dmitry.baryshkov@linaro.org>, Neil Armstrong <neil.armstrong@linaro.org>, AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>, Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org> Cc: Srini Kandagatla <srinivas.kandagatla@linaro.org>, Johan Hovold <johan@kernel.org>, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-arm-msm@vger.kernel.org, linux-mediatek@lists.infradead.org, devicetree@vger.kernel.org, Abel Vesa <abel.vesa@linaro.org> Subject: [PATCH RFC v4 1/4] dt-bindings: spmi: Add PMIC ARB v7 schema Date: Tue, 20 Feb 2024 14:59:21 +0200 [thread overview] Message-ID: <20240220-spmi-multi-master-support-v4-1-dc813c878ba8@linaro.org> (raw) In-Reply-To: <20240220-spmi-multi-master-support-v4-0-dc813c878ba8@linaro.org> Add dedicated schema for PMIC ARB v7 as it allows multiple buses by declaring them as child nodes. These child nodes will follow the generic spmi bus bindings. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- .../bindings/spmi/qcom,spmi-pmic-arb-v7.yaml | 119 +++++++++++++++++++++ 1 file changed, 119 insertions(+) diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb-v7.yaml b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb-v7.yaml new file mode 100644 index 000000000000..8a93d2145aa5 --- /dev/null +++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb-v7.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spmi/qcom,spmi-pmic-arb-v7.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SPMI Controller v7 (PMIC Arbiter) + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + +description: | + The SPMI PMIC Arbiter v7 is found on Snapdragon chipsets. It is an SPMI + controller with wrapping arbitration logic to allow for multiple on-chip + devices to control up to 2 SPMI separate buses. + + The PMIC Arbiter can also act as an interrupt controller, providing interrupts + to slave devices. + +properties: + compatible: + const: qcom,spmi-pmic-arb-v7 + + reg: + items: + - description: core registers + - description: tx-channel per virtual slave regosters + - description: rx-channel (called observer) per virtual slave registers + + reg-names: + items: + - const: core + - const: chnls + - const: obsrvr + + ranges: true + + '#address-cells': + const: 2 + + '#size-cells': + const: 2 + + qcom,ee: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 5 + description: > + indicates the active Execution Environment identifier + + qcom,channel: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 5 + description: > + which of the PMIC Arb provided channels to use for accesses + +patternProperties: + "spmi@[0-1]$": + type: object + $ref: /schemas/spmi/spmi.yaml + +required: + - compatible + - reg-names + - qcom,ee + - qcom,channel + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + spmi: arbiter@c400000 { + compatible = "qcom,spmi-pmic-arb-v7"; + reg = <0x0c400000 0x3000>, + <0x0c500000 0x4000000>, + <0x0c440000 0x80000>; + reg-names = "core", "chnls", "obsrvr"; + + qcom,ee = <0>; + qcom,channel = <0>; + + #address-cells = <2>; + #size-cells = <2>; + + spmi_bus0: spmi@0 { + reg = <0 0x0c42d000 0 0x4000>, + <0 0x0c4c0000 0 0x10000>; + reg-names = "cnfg", "intr"; + + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <4>; + + qcom,bus-id = <0>; + + #address-cells = <2>; + #size-cells = <0>; + }; + + spmi_bus1: spmi@1 { + reg = <0 0x0c432000 0 0x4000>, + <0 0x0c4d0000 0 0x10000>; + reg-names = "cnfg", "intr"; + + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 3 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <4>; + + qcom,bus-id = <1>; + + #address-cells = <2>; + #size-cells = <0>; + }; + }; -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-02-20 12:59 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-02-20 12:59 [PATCH RFC v4 0/4] spmi: pmic-arb: Add support for multiple buses Abel Vesa 2024-02-20 12:59 ` Abel Vesa 2024-02-20 12:59 ` Abel Vesa [this message] 2024-02-20 12:59 ` [PATCH RFC v4 1/4] dt-bindings: spmi: Add PMIC ARB v7 schema Abel Vesa 2024-02-20 12:59 ` [PATCH RFC v4 2/4] spmi: pmic-arb: Make the APID init a version operation Abel Vesa 2024-02-20 12:59 ` Abel Vesa 2024-02-20 12:59 ` [PATCH RFC v4 3/4] spmi: pmic-arb: Make core resources acquiring " Abel Vesa 2024-02-20 12:59 ` Abel Vesa 2024-02-20 12:59 ` [PATCH RFC v4 4/4] spmi: pmic-arb: Add multi bus support Abel Vesa 2024-02-20 12:59 ` Abel Vesa
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240220-spmi-multi-master-support-v4-1-dc813c878ba8@linaro.org \ --to=abel.vesa@linaro.org \ --cc=andersson@kernel.org \ --cc=angelogioacchino.delregno@collabora.com \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=dmitry.baryshkov@linaro.org \ --cc=johan@kernel.org \ --cc=konrad.dybcio@linaro.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mediatek@lists.infradead.org \ --cc=matthias.bgg@gmail.com \ --cc=neil.armstrong@linaro.org \ --cc=robh@kernel.org \ --cc=sboyd@kernel.org \ --cc=srinivas.kandagatla@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.