From: Siddharth Vadapalli <s-vadapalli@ti.com> To: <andrew@lunn.ch>, <hkallweit1@gmail.com>, <linux@armlinux.org.uk>, <davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>, <pabeni@redhat.com> Cc: <xiaoning.wang@nxp.com>, <wei.fang@nxp.com>, <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <srk@ti.com>, <s-vadapalli@ti.com> Subject: [PATCH net] net: phy: realtek: Fix rtl8211f_config_init() for RTL8211F(D)(I)-VD-CG PHY Date: Tue, 20 Feb 2024 12:30:07 +0530 [thread overview] Message-ID: <20240220070007.968762-1-s-vadapalli@ti.com> (raw) Commit bb726b753f75 ("net: phy: realtek: add support for RTL8211F(D)(I)-VD-CG") extended support of the driver from the existing support for RTL8211F(D)(I)-CG PHY to the newer RTL8211F(D)(I)-VD-CG PHY. While that commit indicated that the RTL8211F_PHYCR2 register is not supported by the "VD-CG" PHY model and therefore updated the corresponding section in rtl8211f_config_init() to be invoked conditionally, the call to "genphy_soft_reset()" was left as-is, when it should have also been invoked conditionally. This is because the call to "genphy_soft_reset()" was first introduced by the commit 0a4355c2b7f8 ("net: phy: realtek: add dt property to disable CLKOUT clock") since the RTL8211F guide indicates that a PHY reset should be issued after setting bits in the PHYCR2 register. As the PHYCR2 register is not applicable to the "VD-CG" PHY model, fix the rtl8211f_config_init() function by invoking "genphy_soft_reset()" conditionally based on the presence of the "PHYCR2" register. Fixes: bb726b753f75 ("net: phy: realtek: add support for RTL8211F(D)(I)-VD-CG") Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> --- Hello, This patch is based on Linux 6.8-rc5. Regards, Siddharth. drivers/net/phy/realtek.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 481c79fbd6eb..1fa70427b2a2 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -413,9 +413,11 @@ static int rtl8211f_config_init(struct phy_device *phydev) ERR_PTR(ret)); return ret; } + + return genphy_soft_reset(phydev); } - return genphy_soft_reset(phydev); + return 0; } static int rtl821x_suspend(struct phy_device *phydev) -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Siddharth Vadapalli <s-vadapalli@ti.com> To: <andrew@lunn.ch>, <hkallweit1@gmail.com>, <linux@armlinux.org.uk>, <davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>, <pabeni@redhat.com> Cc: <xiaoning.wang@nxp.com>, <wei.fang@nxp.com>, <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <srk@ti.com>, <s-vadapalli@ti.com> Subject: [PATCH net] net: phy: realtek: Fix rtl8211f_config_init() for RTL8211F(D)(I)-VD-CG PHY Date: Tue, 20 Feb 2024 12:30:07 +0530 [thread overview] Message-ID: <20240220070007.968762-1-s-vadapalli@ti.com> (raw) Commit bb726b753f75 ("net: phy: realtek: add support for RTL8211F(D)(I)-VD-CG") extended support of the driver from the existing support for RTL8211F(D)(I)-CG PHY to the newer RTL8211F(D)(I)-VD-CG PHY. While that commit indicated that the RTL8211F_PHYCR2 register is not supported by the "VD-CG" PHY model and therefore updated the corresponding section in rtl8211f_config_init() to be invoked conditionally, the call to "genphy_soft_reset()" was left as-is, when it should have also been invoked conditionally. This is because the call to "genphy_soft_reset()" was first introduced by the commit 0a4355c2b7f8 ("net: phy: realtek: add dt property to disable CLKOUT clock") since the RTL8211F guide indicates that a PHY reset should be issued after setting bits in the PHYCR2 register. As the PHYCR2 register is not applicable to the "VD-CG" PHY model, fix the rtl8211f_config_init() function by invoking "genphy_soft_reset()" conditionally based on the presence of the "PHYCR2" register. Fixes: bb726b753f75 ("net: phy: realtek: add support for RTL8211F(D)(I)-VD-CG") Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> --- Hello, This patch is based on Linux 6.8-rc5. Regards, Siddharth. drivers/net/phy/realtek.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 481c79fbd6eb..1fa70427b2a2 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -413,9 +413,11 @@ static int rtl8211f_config_init(struct phy_device *phydev) ERR_PTR(ret)); return ret; } + + return genphy_soft_reset(phydev); } - return genphy_soft_reset(phydev); + return 0; } static int rtl821x_suspend(struct phy_device *phydev) -- 2.34.1
next reply other threads:[~2024-02-20 7:00 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-02-20 7:00 Siddharth Vadapalli [this message] 2024-02-20 7:00 ` [PATCH net] net: phy: realtek: Fix rtl8211f_config_init() for RTL8211F(D)(I)-VD-CG PHY Siddharth Vadapalli 2024-02-20 15:00 ` Simon Horman 2024-02-20 15:00 ` Simon Horman 2024-02-22 9:10 ` patchwork-bot+netdevbpf 2024-02-22 9:10 ` patchwork-bot+netdevbpf
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240220070007.968762-1-s-vadapalli@ti.com \ --to=s-vadapalli@ti.com \ --cc=andrew@lunn.ch \ --cc=davem@davemloft.net \ --cc=edumazet@google.com \ --cc=hkallweit1@gmail.com \ --cc=kuba@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=netdev@vger.kernel.org \ --cc=pabeni@redhat.com \ --cc=srk@ti.com \ --cc=wei.fang@nxp.com \ --cc=xiaoning.wang@nxp.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.