From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: hverkuil-cisco@xs4all.nl, laurent.pinchart@ideasonboard.com,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Robert Foss <rfoss@kernel.org>,
Todor Tomov <todor.too@gmail.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
vincent.knecht@mailoo.org, matti.lehtimaki@gmail.com,
quic_grosikop@quicinc.com
Cc: linux-arm-msm@vger.kernel.org, linux-media@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Subject: [PATCH v6 2/6] media: qcom: camss: csiphy-3ph: Add Gen2 v1.1 two-phase MIPI CSI-2 DPHY init
Date: Thu, 22 Feb 2024 17:17:00 +0000 [thread overview]
Message-ID: <20240222-b4-camss-sc8280xp-v6-2-0e0e6a2f8962@linaro.org> (raw)
In-Reply-To: <20240222-b4-camss-sc8280xp-v6-0-0e0e6a2f8962@linaro.org>
Add a PHY configuration sequence for the sc8280xp which uses a Qualcomm
Gen 2 version 1.1 CSI-2 PHY.
The PHY can be configured as two phase or three phase in C-PHY or D-PHY
mode. This configuration supports two-phase D-PHY mode.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
.../platform/qcom/camss/camss-csiphy-3ph-1-0.c | 85 ++++++++++++++++++++++
1 file changed, 85 insertions(+)
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
index f50e2235c37f..66ff48aeab64 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
@@ -148,6 +148,91 @@ csiphy_reg_t lane_regs_sdm845[5][14] = {
},
};
+/* GEN2 1.1 2PH */
+static const struct
+csiphy_reg_t lane_regs_sc8280xp[5][14] = {
+ {
+ {0x0004, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x002C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0034, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x001C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0014, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0028, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x003C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0000, 0x90, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0008, 0x0E, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x000C, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x0010, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0038, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0060, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0064, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ },
+ {
+ {0x0704, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x072C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0734, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x071C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0714, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0728, 0x04, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x073C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0700, 0x80, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0708, 0x0E, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x070C, 0xA5, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0710, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0738, 0x1F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0760, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0764, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ },
+ {
+ {0x0204, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x022C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0234, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x021C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0214, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0228, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x023C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0200, 0x90, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0208, 0x0E, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x020C, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x0210, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0238, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0260, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0264, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ },
+ {
+ {0x0404, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x042C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0434, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x041C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0414, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0428, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x043C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0400, 0x90, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0408, 0x0E, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x040C, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x0410, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0438, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0460, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0464, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ },
+ {
+ {0x0604, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x062C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0634, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x061C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0614, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0628, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x063C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0600, 0x90, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0608, 0x0E, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x060C, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x0610, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0638, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0660, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0664, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ },
+};
+
/* GEN2 1.2.1 2PH */
static const struct
csiphy_reg_t lane_regs_sm8250[5][20] = {
--
2.43.0
next prev parent reply other threads:[~2024-02-22 17:17 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-22 17:16 [PATCH v6 0/6] media: qcom: camss: Add sc8280xp support Bryan O'Donoghue
2024-02-22 17:16 ` [PATCH v6 1/6] media: dt-bindings: media: camss: Add qcom,sc8280xp-camss binding Bryan O'Donoghue
2024-02-22 17:17 ` Bryan O'Donoghue [this message]
2024-02-22 17:17 ` [PATCH v6 3/6] media: qcom: camss: Add CAMSS_SC8280XP enum Bryan O'Donoghue
2024-02-22 17:17 ` [PATCH v6 4/6] media: qcom: camss: Add sc8280xp resources Bryan O'Donoghue
2024-03-12 20:39 ` Konrad Dybcio
2024-02-22 17:17 ` [PATCH v6 5/6] media: qcom: camss: Add sc8280xp support Bryan O'Donoghue
2024-02-22 17:17 ` [PATCH v6 6/6] media: qcom: camss: vfe-17x: Rename camss-vfe-170 to camss-vfe-17x Bryan O'Donoghue
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240222-b4-camss-sc8280xp-v6-2-0e0e6a2f8962@linaro.org \
--to=bryan.odonoghue@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=matti.lehtimaki@gmail.com \
--cc=mchehab@kernel.org \
--cc=quic_grosikop@quicinc.com \
--cc=rfoss@kernel.org \
--cc=robh+dt@kernel.org \
--cc=todor.too@gmail.com \
--cc=vincent.knecht@mailoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.