All of lore.kernel.org
 help / color / mirror / Atom feed
From: <marius.cristea@microchip.com>
To: <jic23@kernel.org>, <lars@metafoo.de>, <robh+dt@kernel.org>,
	<jdelvare@suse.com>, <linux@roeck-us.net>,
	<linux-hwmon@vger.kernel.org>
Cc: <krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>,
	<linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <marius.cristea@microchip.com>
Subject: [PATCH v5 1/2] dt-bindings: iio: adc: adding support for PAC193X
Date: Thu, 22 Feb 2024 18:42:05 +0200	[thread overview]
Message-ID: <20240222164206.65700-2-marius.cristea@microchip.com> (raw)
In-Reply-To: <20240222164206.65700-1-marius.cristea@microchip.com>

From: Marius Cristea <marius.cristea@microchip.com>

This is the device tree schema for iio driver for
Microchip PAC193X series of Power Monitors with Accumulator.

Signed-off-by: Marius Cristea <marius.cristea@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
 .../bindings/iio/adc/microchip,pac1934.yaml   | 120 ++++++++++++++++++
 1 file changed, 120 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml

diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml
new file mode 100644
index 000000000000..52be5ada1eb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/microchip,pac1934.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PAC1934 Power Monitors with Accumulator
+
+maintainers:
+  - Marius Cristea <marius.cristea@microchip.com>
+
+description: |
+  This device is part of the Microchip family of Power Monitors with
+  Accumulator.
+  The datasheet for PAC1931, PAC1932, PAC1933 and PAC1934 can be found here:
+    https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/PAC1931-Family-Data-Sheet-DS20005850E.pdf
+
+properties:
+  compatible:
+    enum:
+      - microchip,pac1931
+      - microchip,pac1932
+      - microchip,pac1933
+      - microchip,pac1934
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+  slow-io-gpios:
+    description:
+      A GPIO used to trigger a change is sampling rate (lowering the chip power
+      consumption). If configured in SLOW mode, if this pin is forced high,
+      sampling rate is forced to eight samples/second. When it is forced low,
+      the sampling rate is 1024 samples/second unless a different sample rate
+      has been programmed.
+
+patternProperties:
+  "^channel@[1-4]+$":
+    type: object
+    $ref: adc.yaml
+    description:
+        Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        items:
+          minimum: 1
+          maximum: 4
+
+      shunt-resistor-micro-ohms:
+        description:
+          Value in micro Ohms of the shunt resistor connected between
+          the SENSE+ and SENSE- inputs, across which the current is measured.
+          Value is needed to compute the scaling of the measured current.
+
+    required:
+      - reg
+      - shunt-resistor-micro-ohms
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-monitor@10 {
+            compatible = "microchip,pac1934";
+            reg = <0x10>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@1 {
+                reg = <0x1>;
+                shunt-resistor-micro-ohms = <24900000>;
+                label = "CPU";
+            };
+
+            channel@2 {
+                reg = <0x2>;
+                shunt-resistor-micro-ohms = <49900000>;
+                label = "GPU";
+            };
+
+            channel@3 {
+                reg = <0x3>;
+                shunt-resistor-micro-ohms = <75000000>;
+                label = "MEM";
+                bipolar;
+            };
+
+            channel@4 {
+                reg = <0x4>;
+                shunt-resistor-micro-ohms = <100000000>;
+                label = "NET";
+                bipolar;
+            };
+        };
+    };
+
+...
-- 
2.34.1


  reply	other threads:[~2024-02-22 16:42 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-22 16:42 [PATCH v5 0/2] adding support for Microchip PAC193X Power Monitor marius.cristea
2024-02-22 16:42 ` marius.cristea [this message]
2024-02-22 17:45   ` [PATCH v5 1/2] dt-bindings: iio: adc: adding support for PAC193X Rob Herring
2024-02-24  7:34   ` kernel test robot
2024-02-24 19:14     ` Jonathan Cameron
2024-02-22 16:42 ` [PATCH v5 2/2] iio: adc: adding support for PAC193x marius.cristea
2024-02-24 19:15   ` Jonathan Cameron
2024-04-05 12:41     ` Conor Dooley
2024-04-05 12:53       ` Marius.Cristea
2024-04-05 16:14         ` Conor Dooley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240222164206.65700-2-marius.cristea@microchip.com \
    --to=marius.cristea@microchip.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jdelvare@suse.com \
    --cc=jic23@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lars@metafoo.de \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.