All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bart Van Assche <bvanassche@acm.org>
To: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org,
	Daejun Park <daejun7.park@samsung.com>,
	Kanchan Joshi <joshi.k@samsung.com>,
	Bart Van Assche <bvanassche@acm.org>,
	Douglas Gilbert <dgilbert@interlog.com>,
	"James E.J. Bottomley" <jejb@linux.ibm.com>
Subject: [PATCH v10 09/11] scsi: scsi_debug: Implement the IO Advice Hints Grouping mode page
Date: Thu, 22 Feb 2024 13:44:57 -0800	[thread overview]
Message-ID: <20240222214508.1630719-10-bvanassche@acm.org> (raw)
In-Reply-To: <20240222214508.1630719-1-bvanassche@acm.org>

Implement an IO Advice Hints Grouping mode page with three permanent
streams. A permanent stream is a stream for which the device server does
not allow closing or otherwise modifying the configuration of that
stream. The stream identifier enable (ST_ENBLE) bit specifies whether
the stream identifier may be used in the GROUP NUMBER field of SCSI
WRITE commands.

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/scsi_debug.c | 61 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 58 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index b544498324f6..ccf59b3e7602 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -1969,7 +1969,11 @@ static int resp_inquiry(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 				arr[4] = 0x5;   /* SPT: GRD_CHK:1, REF_CHK:1 */
 			else
 				arr[4] = 0x0;   /* no protection stuff */
-			arr[5] = 0x7;   /* head of q, ordered + simple q's */
+			/*
+			 * GROUP_SUP=1; HEADSUP=1 (HEAD OF QUEUE); ORDSUP=1
+			 * (ORDERED queuing); SIMPSUP=1 (SIMPLE queuing).
+			 */
+			arr[5] = 0x17;
 		} else if (0x87 == cmd[2]) { /* mode page policy */
 			arr[3] = 0x8;	/* number of following entries */
 			arr[4] = 0x2;	/* disconnect-reconnect mp */
@@ -2559,6 +2563,40 @@ static int resp_ctrl_m_pg(unsigned char *p, int pcontrol, int target)
 	return sizeof(ctrl_m_pg);
 }
 
+/* IO Advice Hints Grouping mode page */
+static int resp_grouping_m_pg(unsigned char *p, int pcontrol, int target)
+{
+	/* IO Advice Hints Grouping mode page */
+	struct grouping_m_pg {
+		u8 page_code;	/* OR 0x40 when subpage_code > 0 */
+		u8 subpage_code;
+		__be16 page_length;
+		u8 reserved[12];
+		struct scsi_io_group_descriptor descr[MAXIMUM_NUMBER_OF_STREAMS];
+	};
+	static const struct grouping_m_pg gr_m_pg = {
+		.page_code = 0xa | 0x40,
+		.subpage_code = 5,
+		.page_length = cpu_to_be16(sizeof(gr_m_pg) - 4),
+		.descr = {
+			{ .st_enble = 1 },
+			{ .st_enble = 1 },
+			{ .st_enble = 1 },
+			{ .st_enble = 1 },
+			{ .st_enble = 1 },
+			{ .st_enble = 0 },
+		}
+	};
+
+	BUILD_BUG_ON(sizeof(struct grouping_m_pg) !=
+		     16 + MAXIMUM_NUMBER_OF_STREAMS * 16);
+	memcpy(p, &gr_m_pg, sizeof(gr_m_pg));
+	if (1 == pcontrol) {
+		/* There are no changeable values so clear from byte 4 on. */
+		memset(p + 4, 0, sizeof(gr_m_pg) - 4);
+	}
+	return sizeof(gr_m_pg);
+}
 
 static int resp_iec_m_pg(unsigned char *p, int pcontrol, int target)
 {	/* Informational Exceptions control mode page for mode_sense */
@@ -2708,6 +2746,10 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
 		ap = arr + offset;
 	}
 
+	/*
+	 * N.B. If len>0 before resp_*_pg() call, then form of that call should be:
+	 *        len += resp_*_pg(ap + len, pcontrol, target);
+	 */
 	switch (pcode) {
 	case 0x1:	/* Read-Write error recovery page, direct access */
 		if (subpcode > 0x0 && subpcode < 0xff)
@@ -2742,9 +2784,20 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
 		}
 		break;
 	case 0xa:	/* Control Mode page, all devices */
-		if (subpcode > 0x0 && subpcode < 0xff)
+		switch (subpcode) {
+		case 0:
+			len = resp_ctrl_m_pg(ap, pcontrol, target);
+			break;
+		case 0x05:
+			len = resp_grouping_m_pg(ap, pcontrol, target);
+			break;
+		case 0xff:
+			len = resp_ctrl_m_pg(ap, pcontrol, target);
+			len += resp_grouping_m_pg(ap + len, pcontrol, target);
+			break;
+		default:
 			goto bad_subpcode;
-		len = resp_ctrl_m_pg(ap, pcontrol, target);
+		}
 		offset += len;
 		break;
 	case 0x19:	/* if spc==1 then sas phy, control+discover */
@@ -2778,6 +2831,8 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
 			len += resp_caching_pg(ap + len, pcontrol, target);
 		}
 		len += resp_ctrl_m_pg(ap + len, pcontrol, target);
+		if (0xff == subpcode)
+			len += resp_grouping_m_pg(ap + len, pcontrol, target);
 		len += resp_sas_sf_m_pg(ap + len, pcontrol, target);
 		if (0xff == subpcode) {
 			len += resp_sas_pcd_m_spg(ap + len, pcontrol, target,

  parent reply	other threads:[~2024-02-22 21:45 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-22 21:44 [PATCH v10 00/11] Pass data lifetime information to SCSI disk devices Bart Van Assche
2024-02-22 21:44 ` [PATCH v10 01/11] scsi: core: Query the Block Limits Extension VPD page Bart Van Assche
2024-02-22 21:44 ` [PATCH v10 02/11] scsi: scsi_proto: Add structures and constants related to I/O groups and streams Bart Van Assche
2024-02-22 21:44 ` [PATCH v10 03/11] scsi: sd: Translate data lifetime information Bart Van Assche
2024-03-11 10:46   ` John Garry
2024-03-11 17:14     ` Bart Van Assche
2024-03-11 17:21       ` John Garry
2024-02-22 21:44 ` [PATCH v10 04/11] scsi: scsi_debug: Reduce code duplication Bart Van Assche
2024-02-22 21:44 ` [PATCH v10 05/11] scsi: scsi_debug: Support the block limits extension VPD page Bart Van Assche
2024-02-22 21:44 ` [PATCH v10 06/11] scsi: scsi_debug: Rework page code error handling Bart Van Assche
2024-02-22 21:44 ` [PATCH v10 07/11] scsi: scsi_debug: Rework subpage " Bart Van Assche
2024-02-22 21:44 ` [PATCH v10 08/11] scsi: scsi_debug: Allocate the MODE SENSE response from the heap Bart Van Assche
2024-02-22 21:44 ` Bart Van Assche [this message]
2024-02-22 21:44 ` [PATCH v10 10/11] scsi: scsi_debug: Implement GET STREAM STATUS Bart Van Assche
2024-02-22 21:44 ` [PATCH v10 11/11] scsi: scsi_debug: Maintain write statistics per group number Bart Van Assche
2024-02-26  3:07 ` [PATCH v10 00/11] Pass data lifetime information to SCSI disk devices Bart Van Assche
2024-02-27  2:41 ` Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240222214508.1630719-10-bvanassche@acm.org \
    --to=bvanassche@acm.org \
    --cc=daejun7.park@samsung.com \
    --cc=dgilbert@interlog.com \
    --cc=jejb@linux.ibm.com \
    --cc=joshi.k@samsung.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.