All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bart Van Assche <bvanassche@acm.org>
To: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org,
	Daejun Park <daejun7.park@samsung.com>,
	Kanchan Joshi <joshi.k@samsung.com>,
	Bart Van Assche <bvanassche@acm.org>,
	Douglas Gilbert <dgilbert@interlog.com>,
	"James E.J. Bottomley" <jejb@linux.ibm.com>
Subject: [PATCH v10 11/11] scsi: scsi_debug: Maintain write statistics per group number
Date: Thu, 22 Feb 2024 13:44:59 -0800	[thread overview]
Message-ID: <20240222214508.1630719-12-bvanassche@acm.org> (raw)
In-Reply-To: <20240222214508.1630719-1-bvanassche@acm.org>

Track per GROUP NUMBER how many write commands have been processed. Make
this information available in sysfs. Reset these statistics if any data
is written into the sysfs attribute.

Note: SCSI devices should only interpret the information in the GROUP
NUMBER field as a stream identifier if the ST_ENBLE bit has been set to
one. This patch follows a simpler approach: count the number of writes
per GROUP NUMBER whether or not the group number represents a stream
identifier.

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/scsi_debug.c | 49 +++++++++++++++++++++++++++++++++++----
 1 file changed, 45 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 497045e54300..ce52d580d1aa 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -902,6 +902,8 @@ static int sdeb_zbc_nr_conv = DEF_ZBC_NR_CONV_ZONES;
 static int submit_queues = DEF_SUBMIT_QUEUES;  /* > 1 for multi-queue (mq) */
 static int poll_queues; /* iouring iopoll interface.*/
 
+static atomic_long_t writes_by_group_number[64];
+
 static char sdebug_proc_name[] = MY_NAME;
 static const char *my_name = MY_NAME;
 
@@ -3377,7 +3379,8 @@ static inline struct sdeb_store_info *devip2sip(struct sdebug_dev_info *devip,
 
 /* Returns number of bytes copied or -1 if error. */
 static int do_device_access(struct sdeb_store_info *sip, struct scsi_cmnd *scp,
-			    u32 sg_skip, u64 lba, u32 num, bool do_write)
+			    u32 sg_skip, u64 lba, u32 num, bool do_write,
+			    u8 group_number)
 {
 	int ret;
 	u64 block, rest = 0;
@@ -3396,6 +3399,10 @@ static int do_device_access(struct sdeb_store_info *sip, struct scsi_cmnd *scp,
 		return 0;
 	if (scp->sc_data_direction != dir)
 		return -1;
+
+	if (do_write && group_number < ARRAY_SIZE(writes_by_group_number))
+		atomic_long_inc(&writes_by_group_number[group_number]);
+
 	fsp = sip->storep;
 
 	block = do_div(lba, sdebug_store_sectors);
@@ -3769,7 +3776,7 @@ static int resp_read_dt0(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 		}
 	}
 
-	ret = do_device_access(sip, scp, 0, lba, num, false);
+	ret = do_device_access(sip, scp, 0, lba, num, false, 0);
 	sdeb_read_unlock(sip);
 	if (unlikely(ret == -1))
 		return DID_ERROR << 16;
@@ -3954,6 +3961,7 @@ static int resp_write_dt0(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 {
 	bool check_prot;
 	u32 num;
+	u8 group = 0;
 	u32 ei_lba;
 	int ret;
 	u64 lba;
@@ -3965,11 +3973,13 @@ static int resp_write_dt0(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 		ei_lba = 0;
 		lba = get_unaligned_be64(cmd + 2);
 		num = get_unaligned_be32(cmd + 10);
+		group = cmd[14] & 0x3f;
 		check_prot = true;
 		break;
 	case WRITE_10:
 		ei_lba = 0;
 		lba = get_unaligned_be32(cmd + 2);
+		group = cmd[6] & 0x3f;
 		num = get_unaligned_be16(cmd + 7);
 		check_prot = true;
 		break;
@@ -3984,15 +3994,18 @@ static int resp_write_dt0(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 		ei_lba = 0;
 		lba = get_unaligned_be32(cmd + 2);
 		num = get_unaligned_be32(cmd + 6);
+		group = cmd[6] & 0x3f;
 		check_prot = true;
 		break;
 	case 0x53:	/* XDWRITEREAD(10) */
 		ei_lba = 0;
 		lba = get_unaligned_be32(cmd + 2);
+		group = cmd[6] & 0x1f;
 		num = get_unaligned_be16(cmd + 7);
 		check_prot = false;
 		break;
 	default:	/* assume WRITE(32) */
+		group = cmd[6] & 0x3f;
 		lba = get_unaligned_be64(cmd + 12);
 		ei_lba = get_unaligned_be32(cmd + 20);
 		num = get_unaligned_be32(cmd + 28);
@@ -4047,7 +4060,7 @@ static int resp_write_dt0(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 		}
 	}
 
-	ret = do_device_access(sip, scp, 0, lba, num, true);
+	ret = do_device_access(sip, scp, 0, lba, num, true, group);
 	if (unlikely(scsi_debug_lbp()))
 		map_region(sip, lba, num);
 	/* If ZBC zone then bump its write pointer */
@@ -4099,12 +4112,14 @@ static int resp_write_scat(struct scsi_cmnd *scp,
 	u32 lb_size = sdebug_sector_size;
 	u32 ei_lba;
 	u64 lba;
+	u8 group;
 	int ret, res;
 	bool is_16;
 	static const u32 lrd_size = 32; /* + parameter list header size */
 
 	if (cmd[0] == VARIABLE_LENGTH_CMD) {
 		is_16 = false;
+		group = cmd[6] & 0x3f;
 		wrprotect = (cmd[10] >> 5) & 0x7;
 		lbdof = get_unaligned_be16(cmd + 12);
 		num_lrd = get_unaligned_be16(cmd + 16);
@@ -4115,6 +4130,7 @@ static int resp_write_scat(struct scsi_cmnd *scp,
 		lbdof = get_unaligned_be16(cmd + 4);
 		num_lrd = get_unaligned_be16(cmd + 8);
 		bt_len = get_unaligned_be32(cmd + 10);
+		group = cmd[14] & 0x3f;
 		if (unlikely(have_dif_prot)) {
 			if (sdebug_dif == T10_PI_TYPE2_PROTECTION &&
 			    wrprotect) {
@@ -4203,7 +4219,7 @@ static int resp_write_scat(struct scsi_cmnd *scp,
 			}
 		}
 
-		ret = do_device_access(sip, scp, sg_off, lba, num, true);
+		ret = do_device_access(sip, scp, sg_off, lba, num, true, group);
 		/* If ZBC zone then bump its write pointer */
 		if (sdebug_dev_is_zoned(devip))
 			zbc_inc_wp(devip, lba, num);
@@ -7298,6 +7314,30 @@ static ssize_t tur_ms_to_ready_show(struct device_driver *ddp, char *buf)
 }
 static DRIVER_ATTR_RO(tur_ms_to_ready);
 
+static ssize_t group_number_stats_show(struct device_driver *ddp, char *buf)
+{
+	char *p = buf, *end = buf + PAGE_SIZE;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(writes_by_group_number); i++)
+		p += scnprintf(p, end - p, "%d %ld\n", i,
+			       atomic_long_read(&writes_by_group_number[i]));
+
+	return p - buf;
+}
+
+static ssize_t group_number_stats_store(struct device_driver *ddp,
+					const char *buf, size_t count)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(writes_by_group_number); i++)
+		atomic_long_set(&writes_by_group_number[i], 0);
+
+	return count;
+}
+static DRIVER_ATTR_RW(group_number_stats);
+
 /* Note: The following array creates attribute files in the
    /sys/bus/pseudo/drivers/scsi_debug directory. The advantage of these
    files (over those found in the /sys/module/scsi_debug/parameters
@@ -7344,6 +7384,7 @@ static struct attribute *sdebug_drv_attrs[] = {
 	&driver_attr_cdb_len.attr,
 	&driver_attr_tur_ms_to_ready.attr,
 	&driver_attr_zbc.attr,
+	&driver_attr_group_number_stats.attr,
 	NULL,
 };
 ATTRIBUTE_GROUPS(sdebug_drv);

  parent reply	other threads:[~2024-02-22 21:45 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-22 21:44 [PATCH v10 00/11] Pass data lifetime information to SCSI disk devices Bart Van Assche
2024-02-22 21:44 ` [PATCH v10 01/11] scsi: core: Query the Block Limits Extension VPD page Bart Van Assche
2024-02-22 21:44 ` [PATCH v10 02/11] scsi: scsi_proto: Add structures and constants related to I/O groups and streams Bart Van Assche
2024-02-22 21:44 ` [PATCH v10 03/11] scsi: sd: Translate data lifetime information Bart Van Assche
2024-03-11 10:46   ` John Garry
2024-03-11 17:14     ` Bart Van Assche
2024-03-11 17:21       ` John Garry
2024-02-22 21:44 ` [PATCH v10 04/11] scsi: scsi_debug: Reduce code duplication Bart Van Assche
2024-02-22 21:44 ` [PATCH v10 05/11] scsi: scsi_debug: Support the block limits extension VPD page Bart Van Assche
2024-02-22 21:44 ` [PATCH v10 06/11] scsi: scsi_debug: Rework page code error handling Bart Van Assche
2024-02-22 21:44 ` [PATCH v10 07/11] scsi: scsi_debug: Rework subpage " Bart Van Assche
2024-02-22 21:44 ` [PATCH v10 08/11] scsi: scsi_debug: Allocate the MODE SENSE response from the heap Bart Van Assche
2024-02-22 21:44 ` [PATCH v10 09/11] scsi: scsi_debug: Implement the IO Advice Hints Grouping mode page Bart Van Assche
2024-02-22 21:44 ` [PATCH v10 10/11] scsi: scsi_debug: Implement GET STREAM STATUS Bart Van Assche
2024-02-22 21:44 ` Bart Van Assche [this message]
2024-02-26  3:07 ` [PATCH v10 00/11] Pass data lifetime information to SCSI disk devices Bart Van Assche
2024-02-27  2:41 ` Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240222214508.1630719-12-bvanassche@acm.org \
    --to=bvanassche@acm.org \
    --cc=daejun7.park@samsung.com \
    --cc=dgilbert@interlog.com \
    --cc=jejb@linux.ibm.com \
    --cc=joshi.k@samsung.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.