From: Jerome Brunet <jbrunet@baylibre.com> To: Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com> Cc: Jerome Brunet <jbrunet@baylibre.com>, alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org Subject: [PATCH 5/6] ASoC: meson: axg-fifo: take continuous rates Date: Fri, 23 Feb 2024 18:51:11 +0100 [thread overview] Message-ID: <20240223175116.2005407-6-jbrunet@baylibre.com> (raw) In-Reply-To: <20240223175116.2005407-1-jbrunet@baylibre.com> The rate of the stream does not matter for the fifos of the axg family. Fifos will just push or pull data to/from the DDR according to consumption or production of the downstream element, which is the DPCM backend. Drop the rate list and allow continuous rates. The lower and upper rate are set according what is known to work with the different backends This allows the PDM input backend to also use continuous rates. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- sound/soc/meson/axg-fifo.h | 2 -- sound/soc/meson/axg-frddr.c | 8 ++++++-- sound/soc/meson/axg-toddr.c | 8 ++++++-- 3 files changed, 12 insertions(+), 6 deletions(-) diff --git a/sound/soc/meson/axg-fifo.h b/sound/soc/meson/axg-fifo.h index df528e8cb7c9..a14c31eb06d8 100644 --- a/sound/soc/meson/axg-fifo.h +++ b/sound/soc/meson/axg-fifo.h @@ -21,8 +21,6 @@ struct snd_soc_dai_driver; struct snd_soc_pcm_runtime; #define AXG_FIFO_CH_MAX 128 -#define AXG_FIFO_RATES (SNDRV_PCM_RATE_5512 | \ - SNDRV_PCM_RATE_8000_384000) #define AXG_FIFO_FORMATS (SNDRV_PCM_FMTBIT_S8 | \ SNDRV_PCM_FMTBIT_S16_LE | \ SNDRV_PCM_FMTBIT_S20_LE | \ diff --git a/sound/soc/meson/axg-frddr.c b/sound/soc/meson/axg-frddr.c index 8c166a5f338c..98140f449eb3 100644 --- a/sound/soc/meson/axg-frddr.c +++ b/sound/soc/meson/axg-frddr.c @@ -109,7 +109,9 @@ static struct snd_soc_dai_driver axg_frddr_dai_drv = { .stream_name = "Playback", .channels_min = 1, .channels_max = AXG_FIFO_CH_MAX, - .rates = AXG_FIFO_RATES, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .rate_min = 5515, + .rate_max = 384000, .formats = AXG_FIFO_FORMATS, }, .ops = &axg_frddr_ops, @@ -184,7 +186,9 @@ static struct snd_soc_dai_driver g12a_frddr_dai_drv = { .stream_name = "Playback", .channels_min = 1, .channels_max = AXG_FIFO_CH_MAX, - .rates = AXG_FIFO_RATES, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .rate_min = 5515, + .rate_max = 384000, .formats = AXG_FIFO_FORMATS, }, .ops = &g12a_frddr_ops, diff --git a/sound/soc/meson/axg-toddr.c b/sound/soc/meson/axg-toddr.c index 1a0be177b8fe..32ee45cce7f8 100644 --- a/sound/soc/meson/axg-toddr.c +++ b/sound/soc/meson/axg-toddr.c @@ -131,7 +131,9 @@ static struct snd_soc_dai_driver axg_toddr_dai_drv = { .stream_name = "Capture", .channels_min = 1, .channels_max = AXG_FIFO_CH_MAX, - .rates = AXG_FIFO_RATES, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .rate_min = 5515, + .rate_max = 384000, .formats = AXG_FIFO_FORMATS, }, .ops = &axg_toddr_ops, @@ -226,7 +228,9 @@ static struct snd_soc_dai_driver g12a_toddr_dai_drv = { .stream_name = "Capture", .channels_min = 1, .channels_max = AXG_FIFO_CH_MAX, - .rates = AXG_FIFO_RATES, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .rate_min = 5515, + .rate_max = 384000, .formats = AXG_FIFO_FORMATS, }, .ops = &g12a_toddr_ops, -- 2.43.0
WARNING: multiple messages have this Message-ID (diff)
From: Jerome Brunet <jbrunet@baylibre.com> To: Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com> Cc: Jerome Brunet <jbrunet@baylibre.com>, alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org Subject: [PATCH 5/6] ASoC: meson: axg-fifo: take continuous rates Date: Fri, 23 Feb 2024 18:51:11 +0100 [thread overview] Message-ID: <20240223175116.2005407-6-jbrunet@baylibre.com> (raw) In-Reply-To: <20240223175116.2005407-1-jbrunet@baylibre.com> The rate of the stream does not matter for the fifos of the axg family. Fifos will just push or pull data to/from the DDR according to consumption or production of the downstream element, which is the DPCM backend. Drop the rate list and allow continuous rates. The lower and upper rate are set according what is known to work with the different backends This allows the PDM input backend to also use continuous rates. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- sound/soc/meson/axg-fifo.h | 2 -- sound/soc/meson/axg-frddr.c | 8 ++++++-- sound/soc/meson/axg-toddr.c | 8 ++++++-- 3 files changed, 12 insertions(+), 6 deletions(-) diff --git a/sound/soc/meson/axg-fifo.h b/sound/soc/meson/axg-fifo.h index df528e8cb7c9..a14c31eb06d8 100644 --- a/sound/soc/meson/axg-fifo.h +++ b/sound/soc/meson/axg-fifo.h @@ -21,8 +21,6 @@ struct snd_soc_dai_driver; struct snd_soc_pcm_runtime; #define AXG_FIFO_CH_MAX 128 -#define AXG_FIFO_RATES (SNDRV_PCM_RATE_5512 | \ - SNDRV_PCM_RATE_8000_384000) #define AXG_FIFO_FORMATS (SNDRV_PCM_FMTBIT_S8 | \ SNDRV_PCM_FMTBIT_S16_LE | \ SNDRV_PCM_FMTBIT_S20_LE | \ diff --git a/sound/soc/meson/axg-frddr.c b/sound/soc/meson/axg-frddr.c index 8c166a5f338c..98140f449eb3 100644 --- a/sound/soc/meson/axg-frddr.c +++ b/sound/soc/meson/axg-frddr.c @@ -109,7 +109,9 @@ static struct snd_soc_dai_driver axg_frddr_dai_drv = { .stream_name = "Playback", .channels_min = 1, .channels_max = AXG_FIFO_CH_MAX, - .rates = AXG_FIFO_RATES, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .rate_min = 5515, + .rate_max = 384000, .formats = AXG_FIFO_FORMATS, }, .ops = &axg_frddr_ops, @@ -184,7 +186,9 @@ static struct snd_soc_dai_driver g12a_frddr_dai_drv = { .stream_name = "Playback", .channels_min = 1, .channels_max = AXG_FIFO_CH_MAX, - .rates = AXG_FIFO_RATES, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .rate_min = 5515, + .rate_max = 384000, .formats = AXG_FIFO_FORMATS, }, .ops = &g12a_frddr_ops, diff --git a/sound/soc/meson/axg-toddr.c b/sound/soc/meson/axg-toddr.c index 1a0be177b8fe..32ee45cce7f8 100644 --- a/sound/soc/meson/axg-toddr.c +++ b/sound/soc/meson/axg-toddr.c @@ -131,7 +131,9 @@ static struct snd_soc_dai_driver axg_toddr_dai_drv = { .stream_name = "Capture", .channels_min = 1, .channels_max = AXG_FIFO_CH_MAX, - .rates = AXG_FIFO_RATES, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .rate_min = 5515, + .rate_max = 384000, .formats = AXG_FIFO_FORMATS, }, .ops = &axg_toddr_ops, @@ -226,7 +228,9 @@ static struct snd_soc_dai_driver g12a_toddr_dai_drv = { .stream_name = "Capture", .channels_min = 1, .channels_max = AXG_FIFO_CH_MAX, - .rates = AXG_FIFO_RATES, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .rate_min = 5515, + .rate_max = 384000, .formats = AXG_FIFO_FORMATS, }, .ops = &g12a_toddr_ops, -- 2.43.0 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2024-02-23 17:51 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-02-23 17:51 [PATCH 0/6] ASoC: meson: axg fixes and clean-up Jerome Brunet 2024-02-23 17:51 ` Jerome Brunet 2024-02-23 17:51 ` [PATCH 1/6] ASoC: meson: axg-tdm-interface: fix mclk setup without mclk-fs Jerome Brunet 2024-02-23 17:51 ` Jerome Brunet 2024-02-23 17:51 ` [PATCH 2/6] ASoC: meson: axg-tdm-interface: add frame rate constraint Jerome Brunet 2024-02-23 17:51 ` Jerome Brunet 2024-02-23 17:51 ` [PATCH 3/6] ASoC: meson: axg-tdm-interface: update error format error traces Jerome Brunet 2024-02-23 17:51 ` Jerome Brunet 2024-02-23 17:51 ` [PATCH 4/6] ASoC: meson: axg-spdifin: use max width for rate detection Jerome Brunet 2024-02-23 17:51 ` Jerome Brunet 2024-02-23 17:51 ` Jerome Brunet [this message] 2024-02-23 17:51 ` [PATCH 5/6] ASoC: meson: axg-fifo: take continuous rates Jerome Brunet 2024-02-23 17:51 ` [PATCH 6/6] ASoC: meson: axg-fifo: use FIELD helpers Jerome Brunet 2024-02-23 17:51 ` Jerome Brunet 2024-02-26 15:42 ` Mark Brown 2024-02-26 15:42 ` Mark Brown 2024-02-26 18:15 ` Jerome Brunet 2024-02-26 18:15 ` Jerome Brunet 2024-02-26 18:22 ` Mark Brown 2024-02-26 18:22 ` Mark Brown 2024-02-26 19:28 ` [PATCH 0/6] ASoC: meson: axg fixes and clean-up Mark Brown 2024-02-26 19:28 ` Mark Brown
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240223175116.2005407-6-jbrunet@baylibre.com \ --to=jbrunet@baylibre.com \ --cc=alsa-devel@alsa-project.org \ --cc=broonie@kernel.org \ --cc=lgirdwood@gmail.com \ --cc=linux-amlogic@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.