From: Biju Das <biju.das.jz@bp.renesas.com> To: Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will@kernel.org> Cc: Biju Das <biju.das.jz@bp.renesas.com>, Bjorn Andersson <quic_bjorande@quicinc.com>, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>, Geert Uytterhoeven <geert+renesas@glider.be>, Konrad Dybcio <konrad.dybcio@linaro.org>, Arnd Bergmann <arnd@arndb.de>, Neil Armstrong <neil.armstrong@linaro.org>, Marek Szyprowski <m.szyprowski@samsung.com>, linux-arm-kernel@lists.infradead.org, Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>, Biju Das <biju.das.au@gmail.com>, linux-renesas-soc@vger.kernel.org Subject: [PATCH v2] arm64: defconfig: Enable Renesas DA9062 PMIC Date: Mon, 26 Feb 2024 20:01:57 +0000 [thread overview] Message-ID: <20240226200157.428896-1-biju.das.jz@bp.renesas.com> (raw) Enable the config for the Renesas DA9062 PMIC and built-in RTC, GPIO and ONKEY drivers as it is populated on RZ/{G2UL,Five} SMARC EVK development boards. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> --- v1->v2: * Enabled CONFIG_INPUT_DA9063_ONKEY and CONFIG_PINCTRL_DA9062 --- arch/arm64/configs/defconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 34681284043f..0a9c3c0f6c47 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -442,6 +442,7 @@ CONFIG_INPUT_TPS65219_PWRBUTTON=m CONFIG_INPUT_PWM_BEEPER=m CONFIG_INPUT_PWM_VIBRA=m CONFIG_INPUT_RK805_PWRKEY=m +CONFIG_INPUT_DA9063_ONKEY=m CONFIG_INPUT_HISI_POWERKEY=y # CONFIG_SERIO_SERPORT is not set CONFIG_SERIO_AMBAKMI=y @@ -559,6 +560,7 @@ CONFIG_SPI_TEGRA114=m CONFIG_SPI_SPIDEV=m CONFIG_SPMI=y CONFIG_SPMI_MTK_PMIF=m +CONFIG_PINCTRL_DA9062=m CONFIG_PINCTRL_MAX77620=y CONFIG_PINCTRL_RK805=m CONFIG_PINCTRL_SINGLE=y @@ -724,6 +726,7 @@ CONFIG_MFD_ALTERA_SYSMGR=y CONFIG_MFD_BD9571MWV=y CONFIG_MFD_AXP20X_I2C=y CONFIG_MFD_AXP20X_RSB=y +CONFIG_MFD_DA9062=y CONFIG_MFD_EXYNOS_LPASS=m CONFIG_MFD_HI6421_PMIC=y CONFIG_MFD_HI655X_PMIC=y @@ -1166,6 +1169,7 @@ CONFIG_RTC_DRV_RV8803=m CONFIG_RTC_DRV_S5M=y CONFIG_RTC_DRV_DS3232=y CONFIG_RTC_DRV_PCF2127=m +CONFIG_RTC_DRV_DA9063=m CONFIG_RTC_DRV_EFI=y CONFIG_RTC_DRV_CROS_EC=y CONFIG_RTC_DRV_FSL_FTM_ALARM=m -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Biju Das <biju.das.jz@bp.renesas.com> To: Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will@kernel.org> Cc: Biju Das <biju.das.jz@bp.renesas.com>, Bjorn Andersson <quic_bjorande@quicinc.com>, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>, Geert Uytterhoeven <geert+renesas@glider.be>, Konrad Dybcio <konrad.dybcio@linaro.org>, Arnd Bergmann <arnd@arndb.de>, Neil Armstrong <neil.armstrong@linaro.org>, Marek Szyprowski <m.szyprowski@samsung.com>, linux-arm-kernel@lists.infradead.org, Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>, Biju Das <biju.das.au@gmail.com>, linux-renesas-soc@vger.kernel.org Subject: [PATCH v2] arm64: defconfig: Enable Renesas DA9062 PMIC Date: Mon, 26 Feb 2024 20:01:57 +0000 [thread overview] Message-ID: <20240226200157.428896-1-biju.das.jz@bp.renesas.com> (raw) Enable the config for the Renesas DA9062 PMIC and built-in RTC, GPIO and ONKEY drivers as it is populated on RZ/{G2UL,Five} SMARC EVK development boards. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> --- v1->v2: * Enabled CONFIG_INPUT_DA9063_ONKEY and CONFIG_PINCTRL_DA9062 --- arch/arm64/configs/defconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 34681284043f..0a9c3c0f6c47 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -442,6 +442,7 @@ CONFIG_INPUT_TPS65219_PWRBUTTON=m CONFIG_INPUT_PWM_BEEPER=m CONFIG_INPUT_PWM_VIBRA=m CONFIG_INPUT_RK805_PWRKEY=m +CONFIG_INPUT_DA9063_ONKEY=m CONFIG_INPUT_HISI_POWERKEY=y # CONFIG_SERIO_SERPORT is not set CONFIG_SERIO_AMBAKMI=y @@ -559,6 +560,7 @@ CONFIG_SPI_TEGRA114=m CONFIG_SPI_SPIDEV=m CONFIG_SPMI=y CONFIG_SPMI_MTK_PMIF=m +CONFIG_PINCTRL_DA9062=m CONFIG_PINCTRL_MAX77620=y CONFIG_PINCTRL_RK805=m CONFIG_PINCTRL_SINGLE=y @@ -724,6 +726,7 @@ CONFIG_MFD_ALTERA_SYSMGR=y CONFIG_MFD_BD9571MWV=y CONFIG_MFD_AXP20X_I2C=y CONFIG_MFD_AXP20X_RSB=y +CONFIG_MFD_DA9062=y CONFIG_MFD_EXYNOS_LPASS=m CONFIG_MFD_HI6421_PMIC=y CONFIG_MFD_HI655X_PMIC=y @@ -1166,6 +1169,7 @@ CONFIG_RTC_DRV_RV8803=m CONFIG_RTC_DRV_S5M=y CONFIG_RTC_DRV_DS3232=y CONFIG_RTC_DRV_PCF2127=m +CONFIG_RTC_DRV_DA9063=m CONFIG_RTC_DRV_EFI=y CONFIG_RTC_DRV_CROS_EC=y CONFIG_RTC_DRV_FSL_FTM_ALARM=m -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2024-02-26 20:02 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-02-26 20:01 Biju Das [this message] 2024-02-26 20:01 ` [PATCH v2] arm64: defconfig: Enable Renesas DA9062 PMIC Biju Das 2024-02-27 8:29 ` Geert Uytterhoeven 2024-02-27 8:29 ` Geert Uytterhoeven 2024-02-27 12:13 ` Biju Das 2024-02-27 12:13 ` Biju Das
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240226200157.428896-1-biju.das.jz@bp.renesas.com \ --to=biju.das.jz@bp.renesas.com \ --cc=arnd@arndb.de \ --cc=biju.das.au@gmail.com \ --cc=catalin.marinas@arm.com \ --cc=geert+renesas@glider.be \ --cc=konrad.dybcio@linaro.org \ --cc=krzysztof.kozlowski@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=m.szyprowski@samsung.com \ --cc=neil.armstrong@linaro.org \ --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \ --cc=quic_bjorande@quicinc.com \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.