From: Frank Li <Frank.Li@nxp.com> To: "Richard Zhu" <hongxing.zhu@nxp.com>, "Lucas Stach" <l.stach@pengutronix.de>, "Lorenzo Pieralisi" <lpieralisi@kernel.org>, "Krzysztof Wilczyński" <kw@linux.com>, "Rob Herring" <robh@kernel.org>, "Bjorn Helgaas" <bhelgaas@google.com>, "Shawn Guo" <shawnguo@kernel.org>, "Sascha Hauer" <s.hauer@pengutronix.de>, "Pengutronix Kernel Team" <kernel@pengutronix.de>, "Fabio Estevam" <festevam@gmail.com>, "NXP Linux Team" <linux-imx@nxp.com>, "Philipp Zabel" <p.zabel@pengutronix.de>, "Liam Girdwood" <lgirdwood@gmail.com>, "Mark Brown" <broonie@kernel.org> Cc: linux-pci@vger.kernel.org, imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, bpf@vger.kernel.org, Frank Li <Frank.Li@nxp.com> Subject: [PATCH 2/6] PCI: imx6: Rename pci-imx6.c and PCI_IMX6 config Date: Tue, 27 Feb 2024 16:47:09 -0500 [thread overview] Message-ID: <20240227-pci2_upstream-v1-2-b952f8333606@nxp.com> (raw) In-Reply-To: <20240227-pci2_upstream-v1-0-b952f8333606@nxp.com> pci-imx6.c and PCI_IMX6 actuall for all i.MX chips (i.MX6x, i.MX7x, i.MX8x, i.MX9x). Remove '6' to avoid confuse. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- drivers/pci/controller/dwc/Kconfig | 14 +++++++------- drivers/pci/controller/dwc/Makefile | 2 +- drivers/pci/controller/dwc/{pci-imx6.c => pci-imx.c} | 0 3 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig index 8afacc90c63b8..647ce302e5ebb 100644 --- a/drivers/pci/controller/dwc/Kconfig +++ b/drivers/pci/controller/dwc/Kconfig @@ -70,27 +70,27 @@ config PCIE_BT1 Enables support for the PCIe controller in the Baikal-T1 SoC to work in host mode. It's based on the Synopsys DWC PCIe v4.60a IP-core. -config PCI_IMX6 +config PCI_IMX bool -config PCI_IMX6_HOST - bool "Freescale i.MX6/7/8 PCIe controller (host mode)" +config PCI_IMX_HOST + bool "Freescale i.MX PCIe controller (host mode)" depends on ARCH_MXC || COMPILE_TEST depends on PCI_MSI select PCIE_DW_HOST - select PCI_IMX6 + select PCI_IMX help Enables support for the PCIe controller in the i.MX SoCs to work in Root Complex mode. The PCI controller on i.MX is based on DesignWare hardware and therefore the driver re-uses the DesignWare core functions to implement the driver. -config PCI_IMX6_EP - bool "Freescale i.MX6/7/8 PCIe controller (endpoint mode)" +config PCI_IMX_EP + bool "Freescale i.MX PCIe controller (endpoint mode)" depends on ARCH_MXC || COMPILE_TEST depends on PCI_ENDPOINT select PCIE_DW_EP - select PCI_IMX6 + select PCI_IMX help Enables support for the PCIe controller in the i.MX SoCs to work in endpoint mode. The PCI controller on i.MX is based diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile index bac103faa5237..7084e615b2774 100644 --- a/drivers/pci/controller/dwc/Makefile +++ b/drivers/pci/controller/dwc/Makefile @@ -7,7 +7,7 @@ obj-$(CONFIG_PCIE_BT1) += pcie-bt1.o obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o obj-$(CONFIG_PCIE_FU740) += pcie-fu740.o -obj-$(CONFIG_PCI_IMX6) += pci-imx6.o +obj-$(CONFIG_PCI_IMX) += pci-imx.o obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx.c similarity index 100% rename from drivers/pci/controller/dwc/pci-imx6.c rename to drivers/pci/controller/dwc/pci-imx.c -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Frank Li <Frank.Li@nxp.com> To: "Richard Zhu" <hongxing.zhu@nxp.com>, "Lucas Stach" <l.stach@pengutronix.de>, "Lorenzo Pieralisi" <lpieralisi@kernel.org>, "Krzysztof Wilczyński" <kw@linux.com>, "Rob Herring" <robh@kernel.org>, "Bjorn Helgaas" <bhelgaas@google.com>, "Shawn Guo" <shawnguo@kernel.org>, "Sascha Hauer" <s.hauer@pengutronix.de>, "Pengutronix Kernel Team" <kernel@pengutronix.de>, "Fabio Estevam" <festevam@gmail.com>, "NXP Linux Team" <linux-imx@nxp.com>, "Philipp Zabel" <p.zabel@pengutronix.de>, "Liam Girdwood" <lgirdwood@gmail.com>, "Mark Brown" <broonie@kernel.org> Cc: linux-pci@vger.kernel.org, imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, bpf@vger.kernel.org, Frank Li <Frank.Li@nxp.com> Subject: [PATCH 2/6] PCI: imx6: Rename pci-imx6.c and PCI_IMX6 config Date: Tue, 27 Feb 2024 16:47:09 -0500 [thread overview] Message-ID: <20240227-pci2_upstream-v1-2-b952f8333606@nxp.com> (raw) In-Reply-To: <20240227-pci2_upstream-v1-0-b952f8333606@nxp.com> pci-imx6.c and PCI_IMX6 actuall for all i.MX chips (i.MX6x, i.MX7x, i.MX8x, i.MX9x). Remove '6' to avoid confuse. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- drivers/pci/controller/dwc/Kconfig | 14 +++++++------- drivers/pci/controller/dwc/Makefile | 2 +- drivers/pci/controller/dwc/{pci-imx6.c => pci-imx.c} | 0 3 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig index 8afacc90c63b8..647ce302e5ebb 100644 --- a/drivers/pci/controller/dwc/Kconfig +++ b/drivers/pci/controller/dwc/Kconfig @@ -70,27 +70,27 @@ config PCIE_BT1 Enables support for the PCIe controller in the Baikal-T1 SoC to work in host mode. It's based on the Synopsys DWC PCIe v4.60a IP-core. -config PCI_IMX6 +config PCI_IMX bool -config PCI_IMX6_HOST - bool "Freescale i.MX6/7/8 PCIe controller (host mode)" +config PCI_IMX_HOST + bool "Freescale i.MX PCIe controller (host mode)" depends on ARCH_MXC || COMPILE_TEST depends on PCI_MSI select PCIE_DW_HOST - select PCI_IMX6 + select PCI_IMX help Enables support for the PCIe controller in the i.MX SoCs to work in Root Complex mode. The PCI controller on i.MX is based on DesignWare hardware and therefore the driver re-uses the DesignWare core functions to implement the driver. -config PCI_IMX6_EP - bool "Freescale i.MX6/7/8 PCIe controller (endpoint mode)" +config PCI_IMX_EP + bool "Freescale i.MX PCIe controller (endpoint mode)" depends on ARCH_MXC || COMPILE_TEST depends on PCI_ENDPOINT select PCIE_DW_EP - select PCI_IMX6 + select PCI_IMX help Enables support for the PCIe controller in the i.MX SoCs to work in endpoint mode. The PCI controller on i.MX is based diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile index bac103faa5237..7084e615b2774 100644 --- a/drivers/pci/controller/dwc/Makefile +++ b/drivers/pci/controller/dwc/Makefile @@ -7,7 +7,7 @@ obj-$(CONFIG_PCIE_BT1) += pcie-bt1.o obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o obj-$(CONFIG_PCIE_FU740) += pcie-fu740.o -obj-$(CONFIG_PCI_IMX6) += pci-imx6.o +obj-$(CONFIG_PCI_IMX) += pci-imx.o obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx.c similarity index 100% rename from drivers/pci/controller/dwc/pci-imx6.c rename to drivers/pci/controller/dwc/pci-imx.c -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-02-27 21:47 UTC|newest] Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-02-27 21:47 [PATCH 0/6] PCI: imx6: rename\clean up and add lut information for imx95 Frank Li 2024-02-27 21:47 ` Frank Li 2024-02-27 21:47 ` [PATCH 1/6] PCI: imx6: Rename imx6_* with imx_* Frank Li 2024-02-27 21:47 ` Frank Li 2024-02-28 23:14 ` Fabio Estevam 2024-02-28 23:14 ` Fabio Estevam 2024-02-28 23:31 ` Frank Li 2024-02-28 23:31 ` Frank Li 2024-02-27 21:47 ` Frank Li [this message] 2024-02-27 21:47 ` [PATCH 2/6] PCI: imx6: Rename pci-imx6.c and PCI_IMX6 config Frank Li 2024-02-28 23:05 ` Bjorn Helgaas 2024-02-28 23:05 ` Bjorn Helgaas 2024-02-28 23:36 ` Frank Li 2024-02-28 23:36 ` Frank Li 2024-02-29 7:29 ` Ahmad Fatoum 2024-02-29 7:29 ` Ahmad Fatoum 2024-03-01 7:16 ` kernel test robot 2024-03-01 7:16 ` kernel test robot 2024-02-27 21:47 ` [PATCH 3/6] MAINTAINERS: pci: imx: update imx6* to imx* since rename driver file Frank Li 2024-02-27 21:47 ` Frank Li 2024-02-27 21:47 ` [PATCH 4/6] PCI: imx: Simplify switch-case logic by involve set_ref_clk callback Frank Li 2024-02-27 21:47 ` Frank Li 2024-02-27 21:47 ` [PATCH 5/6] PCI: imx: Simplify switch-case logic by involve core_reset callback Frank Li 2024-02-27 21:47 ` Frank Li 2024-02-27 21:47 ` [PATCH 6/6] PCI: imx: Config look up table(LUT) to support MSI ITS and IOMMU for i.MX95 Frank Li 2024-02-27 21:47 ` Frank Li
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240227-pci2_upstream-v1-2-b952f8333606@nxp.com \ --to=frank.li@nxp.com \ --cc=bhelgaas@google.com \ --cc=bpf@vger.kernel.org \ --cc=broonie@kernel.org \ --cc=festevam@gmail.com \ --cc=hongxing.zhu@nxp.com \ --cc=imx@lists.linux.dev \ --cc=kernel@pengutronix.de \ --cc=kw@linux.com \ --cc=l.stach@pengutronix.de \ --cc=lgirdwood@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pci@vger.kernel.org \ --cc=lpieralisi@kernel.org \ --cc=p.zabel@pengutronix.de \ --cc=robh@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.