All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Jonathan Cameron <jic23@kernel.org>,
	Lars-Peter Clausen <lars@metafoo.de>
Subject: [PATCH v1 1/1] iio: adc: twl4030-madc: Make use of device properties
Date: Wed, 28 Feb 2024 22:59:27 +0200	[thread overview]
Message-ID: <20240228205927.3681321-1-andriy.shevchenko@linux.intel.com> (raw)

Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.

Include mod_devicetable.h explicitly to replace the dropped of.h
which included mod_devicetable.h indirectly.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/iio/adc/twl4030-madc.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/iio/adc/twl4030-madc.c b/drivers/iio/adc/twl4030-madc.c
index 4a247ca25a44..a7b6b81014de 100644
--- a/drivers/iio/adc/twl4030-madc.c
+++ b/drivers/iio/adc/twl4030-madc.c
@@ -19,10 +19,12 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/slab.h>
 #include <linux/mfd/twl.h>
-#include <linux/module.h>
 #include <linux/stddef.h>
 #include <linux/mutex.h>
 #include <linux/bitops.h>
@@ -30,7 +32,6 @@
 #include <linux/types.h>
 #include <linux/gfp.h>
 #include <linux/err.h>
-#include <linux/of.h>
 #include <linux/regulator/consumer.h>
 
 #include <linux/iio/iio.h>
@@ -746,7 +747,6 @@ static int twl4030_madc_probe(struct platform_device *pdev)
 {
 	struct twl4030_madc_data *madc;
 	struct twl4030_madc_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	struct device_node *np = pdev->dev.of_node;
 	int irq, ret;
 	u8 regval;
 	struct iio_dev *iio_dev = NULL;
@@ -779,7 +779,7 @@ static int twl4030_madc_probe(struct platform_device *pdev)
 	if (pdata)
 		madc->use_second_irq = (pdata->irq_line != 1);
 	else
-		madc->use_second_irq = of_property_read_bool(np,
+		madc->use_second_irq = device_property_read_bool(&pdev->dev,
 				       "ti,system-uses-second-madc-irq");
 
 	madc->imr = madc->use_second_irq ? TWL4030_MADC_IMR2 :
@@ -905,20 +905,18 @@ static void twl4030_madc_remove(struct platform_device *pdev)
 	regulator_disable(madc->usb3v1);
 }
 
-#ifdef CONFIG_OF
 static const struct of_device_id twl_madc_of_match[] = {
 	{ .compatible = "ti,twl4030-madc", },
-	{ },
+	{ }
 };
 MODULE_DEVICE_TABLE(of, twl_madc_of_match);
-#endif
 
 static struct platform_driver twl4030_madc_driver = {
 	.probe = twl4030_madc_probe,
 	.remove_new = twl4030_madc_remove,
 	.driver = {
 		   .name = "twl4030_madc",
-		   .of_match_table = of_match_ptr(twl_madc_of_match),
+		   .of_match_table = twl_madc_of_match,
 	},
 };
 
-- 
2.43.0.rc1.1.gbec44491f096


             reply	other threads:[~2024-02-28 20:59 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-28 20:59 Andy Shevchenko [this message]
2024-03-03 13:50 ` [PATCH v1 1/1] iio: adc: twl4030-madc: Make use of device properties Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240228205927.3681321-1-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.