From: Raphael Gallais-Pou <rgallaispou@gmail.com> To: "Rafael J. Wysocki" <rafael@kernel.org>, Daniel Lezcano <daniel.lezcano@linaro.org>, Zhang Rui <rui.zhang@intel.com>, Lukasz Luba <lukasz.luba@arm.com>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Patrice Chotard <patrice.chotard@foss.st.com>, Lee Jones <lee@kernel.org> Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 1/2] dt-bindings: thermal: convert st,stih407-thermal to DT schema Date: Fri, 01 Mar 2024 18:47:28 +0100 [thread overview] Message-ID: <20240301-thermal-v2-1-1b32752029ec@gmail.com> (raw) In-Reply-To: <20240301-thermal-v2-0-1b32752029ec@gmail.com> 'st,passive_colling_temp' does not appear in the device-tree, and 'reg' is missing in the device description. Convert st,stih407-thermal binding to DT schema format in order to clean unused 'st,passive_cooling_temp' and add missing 'reg' property. Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com> --- Changes in v2: - Change commit log to use imperative - Drop description - Drop 'clocks' description - Add 'reg' property - Add '#thermal-sensor-cells' - Make node name generic in example - Fix YAML style --- .../bindings/thermal/st,stih407-thermal.yaml | 56 ++++++++++++++++++++++ .../devicetree/bindings/thermal/st-thermal.txt | 32 ------------- 2 files changed, 56 insertions(+), 32 deletions(-) diff --git a/Documentation/devicetree/bindings/thermal/st,stih407-thermal.yaml b/Documentation/devicetree/bindings/thermal/st,stih407-thermal.yaml new file mode 100644 index 000000000000..68d7dd8b892f --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/st,stih407-thermal.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/st,stih407-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STi digital thermal sensor (DTS) + +maintainers: + - Patrice Chotard <patrice.chotard@foss.st.com> + - Lee Jones <lee@kernel.org> + +allOf: + - $ref: thermal-sensor.yaml + +properties: + compatible: + const: st,stih407-thermal + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: thermal + + interrupts: + description: + For thermal sensors for which no interrupt has been defined, a polling + delay of 1000ms will be used to read the temperature from device. + + '#thermal-sensor-cells': true + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + temperature-sensor@91a0000 { + compatible = "st,stih407-thermal"; + reg = <0x91a0000 0x28>; + clock-names = "thermal"; + clocks = <&CLK_SYSIN>; + interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <0>; + }; +... diff --git a/Documentation/devicetree/bindings/thermal/st-thermal.txt b/Documentation/devicetree/bindings/thermal/st-thermal.txt deleted file mode 100644 index a2f939137e35..000000000000 --- a/Documentation/devicetree/bindings/thermal/st-thermal.txt +++ /dev/null @@ -1,32 +0,0 @@ -Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs. - -Required parameters: -------------------- - -compatible : Should be "st,stih407-thermal" - -clock-names : Should be "thermal". - See: Documentation/devicetree/bindings/resource-names.txt -clocks : Phandle of the clock used by the thermal sensor. - See: Documentation/devicetree/bindings/clock/clock-bindings.txt - -Optional parameters: -------------------- - -reg : For non-sysconf based sensors, this should be the physical base - address and length of the sensor's registers. -interrupts : Standard way to define interrupt number. - NB: For thermal sensor's for which no interrupt has been - defined, a polling delay of 1000ms will be used to read the - temperature from device. - -Example: - - temp0@91a0000 { - compatible = "st,stih407-thermal"; - reg = <0x91a0000 0x28>; - clock-names = "thermal"; - clocks = <&CLK_SYSIN>; - interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>; - st,passive_cooling_temp = <110>; - }; -- 2.43.2
WARNING: multiple messages have this Message-ID (diff)
From: Raphael Gallais-Pou <rgallaispou@gmail.com> To: "Rafael J. Wysocki" <rafael@kernel.org>, Daniel Lezcano <daniel.lezcano@linaro.org>, Zhang Rui <rui.zhang@intel.com>, Lukasz Luba <lukasz.luba@arm.com>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Patrice Chotard <patrice.chotard@foss.st.com>, Lee Jones <lee@kernel.org> Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 1/2] dt-bindings: thermal: convert st,stih407-thermal to DT schema Date: Fri, 01 Mar 2024 18:47:28 +0100 [thread overview] Message-ID: <20240301-thermal-v2-1-1b32752029ec@gmail.com> (raw) In-Reply-To: <20240301-thermal-v2-0-1b32752029ec@gmail.com> 'st,passive_colling_temp' does not appear in the device-tree, and 'reg' is missing in the device description. Convert st,stih407-thermal binding to DT schema format in order to clean unused 'st,passive_cooling_temp' and add missing 'reg' property. Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com> --- Changes in v2: - Change commit log to use imperative - Drop description - Drop 'clocks' description - Add 'reg' property - Add '#thermal-sensor-cells' - Make node name generic in example - Fix YAML style --- .../bindings/thermal/st,stih407-thermal.yaml | 56 ++++++++++++++++++++++ .../devicetree/bindings/thermal/st-thermal.txt | 32 ------------- 2 files changed, 56 insertions(+), 32 deletions(-) diff --git a/Documentation/devicetree/bindings/thermal/st,stih407-thermal.yaml b/Documentation/devicetree/bindings/thermal/st,stih407-thermal.yaml new file mode 100644 index 000000000000..68d7dd8b892f --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/st,stih407-thermal.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/st,stih407-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STi digital thermal sensor (DTS) + +maintainers: + - Patrice Chotard <patrice.chotard@foss.st.com> + - Lee Jones <lee@kernel.org> + +allOf: + - $ref: thermal-sensor.yaml + +properties: + compatible: + const: st,stih407-thermal + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: thermal + + interrupts: + description: + For thermal sensors for which no interrupt has been defined, a polling + delay of 1000ms will be used to read the temperature from device. + + '#thermal-sensor-cells': true + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + temperature-sensor@91a0000 { + compatible = "st,stih407-thermal"; + reg = <0x91a0000 0x28>; + clock-names = "thermal"; + clocks = <&CLK_SYSIN>; + interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <0>; + }; +... diff --git a/Documentation/devicetree/bindings/thermal/st-thermal.txt b/Documentation/devicetree/bindings/thermal/st-thermal.txt deleted file mode 100644 index a2f939137e35..000000000000 --- a/Documentation/devicetree/bindings/thermal/st-thermal.txt +++ /dev/null @@ -1,32 +0,0 @@ -Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs. - -Required parameters: -------------------- - -compatible : Should be "st,stih407-thermal" - -clock-names : Should be "thermal". - See: Documentation/devicetree/bindings/resource-names.txt -clocks : Phandle of the clock used by the thermal sensor. - See: Documentation/devicetree/bindings/clock/clock-bindings.txt - -Optional parameters: -------------------- - -reg : For non-sysconf based sensors, this should be the physical base - address and length of the sensor's registers. -interrupts : Standard way to define interrupt number. - NB: For thermal sensor's for which no interrupt has been - defined, a polling delay of 1000ms will be used to read the - temperature from device. - -Example: - - temp0@91a0000 { - compatible = "st,stih407-thermal"; - reg = <0x91a0000 0x28>; - clock-names = "thermal"; - clocks = <&CLK_SYSIN>; - interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>; - st,passive_cooling_temp = <110>; - }; -- 2.43.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-03-01 17:47 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-03-01 17:47 [PATCH v2 0/2] Update st,stih407-thermal device Raphael Gallais-Pou 2024-03-01 17:47 ` Raphael Gallais-Pou 2024-03-01 17:47 ` Raphael Gallais-Pou [this message] 2024-03-01 17:47 ` [PATCH v2 1/2] dt-bindings: thermal: convert st,stih407-thermal to DT schema Raphael Gallais-Pou 2024-03-04 18:40 ` Rob Herring 2024-03-04 18:40 ` Rob Herring 2024-03-06 7:53 ` Raphaël Gallais-Pou 2024-03-06 7:53 ` Raphaël Gallais-Pou 2024-03-19 19:32 ` Raphaël Gallais-Pou 2024-03-19 19:32 ` Raphaël Gallais-Pou 2024-03-20 8:12 ` Krzysztof Kozlowski 2024-03-20 8:12 ` Krzysztof Kozlowski 2024-03-01 17:47 ` [PATCH v2 2/2] ARM: dts: st: add thermal property on stih410.dtsi and stih418.dtsi Raphael Gallais-Pou 2024-03-01 17:47 ` Raphael Gallais-Pou
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240301-thermal-v2-1-1b32752029ec@gmail.com \ --to=rgallaispou@gmail.com \ --cc=conor+dt@kernel.org \ --cc=daniel.lezcano@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=lee@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=lukasz.luba@arm.com \ --cc=patrice.chotard@foss.st.com \ --cc=rafael@kernel.org \ --cc=robh+dt@kernel.org \ --cc=rui.zhang@intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.