[PATCH] arm64: dts: rockchip: qnap-ts433: Simplify network PHY connection

["Uwe Kleine-König" <ukleinek@debian.org>]

While it requires to have the right phy driver loaded (i.e. motorcomm)
to make the phy asserting the right delays, this is generally the
preferred way to define the MAC <-> PHY connection.

Signed-off-by: Uwe Kleine-König <ukleinek@debian.org>
---
Hello,

Andrew already pointed out when I posted the patch introducing the gmac0 node
that rgmii-id would be the preferred way to setup things. Back then this didn't
happen because this change broke reception of network packets. However this
only happend because I didn't have the right phy driver loaded.

Best regards
Uwe

 arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
index 6a998166003c..36ad48d46bc1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
@@ -20,15 +20,13 @@ &gmac0 {
 	assigned-clock-rates = <0>, <125000000>;
 	clock_in_out = "output";
 	phy-handle = <&rgmii_phy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac0_miim
 		     &gmac0_tx_bus2
 		     &gmac0_rx_bus2
 		     &gmac0_rgmii_clk
 		     &gmac0_rgmii_bus>;
-	rx_delay = <0x2f>;
-	tx_delay = <0x3c>;
 	status = "okay";
 };
 

base-commit: 67908bf6954b7635d33760ff6dfc189fc26ccc89
-- 
2.43.0