From: Georgi Djakov <quic_c_gdjako@quicinc.com> To: <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>, <will@kernel.org>, <robin.murphy@arm.com>, <joro@8bytes.org>, <iommu@lists.linux.dev> Cc: <devicetree@vger.kernel.org>, <andersson@kernel.org>, <konrad.dybcio@linaro.org>, <robdclark@gmail.com>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>, <quic_cgoldswo@quicinc.com>, <quic_sukadev@quicinc.com>, <quic_pdaly@quicinc.com>, <quic_sudaraja@quicinc.com>, <djakov@kernel.org> Subject: [PATCH v6 7/7] arm64: dts: qcom: sc7280: Add DT nodes for the TBUs Date: Thu, 7 Mar 2024 11:05:25 -0800 [thread overview] Message-ID: <20240307190525.395291-8-quic_c_gdjako@quicinc.com> (raw) In-Reply-To: <20240307190525.395291-1-quic_c_gdjako@quicinc.com> Add the device-tree nodes for the TBUs (translation buffer units) that are present on the sc7280 platforms. The TBUs can be used debug the kernel and provide additional information when a context faults occur. Describe the all registers, clocks, interconnects and power-domain resources that are needed for each of the TBUs. Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com> --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 89 ++++++++++++++++++++++++++++ 1 file changed, 89 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 7e7f0f0fb41b..5d8aa182e3a9 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -2970,6 +2970,18 @@ adreno_smmu: iommu@3da0000 { dma-coherent; }; + gfx_0_tbu: tbu@3dd9000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x3dd9000 0x0 0x1000>; + qcom,stream-id-range = <&adreno_smmu 0x0 0x400>; + }; + + gfx_1_tbu: tbu@3ddd000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x3ddd000 0x0 0x1000>; + qcom,stream-id-range = <&adreno_smmu 0x400 0x400>; + }; + remoteproc_mpss: remoteproc@4080000 { compatible = "qcom,sc7280-mpss-pas"; reg = <0 0x04080000 0 0x10000>; @@ -5778,6 +5790,83 @@ apps_smmu: iommu@15000000 { <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; }; + anoc_1_tbu: tbu@151dd000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151dd000 0x0 0x1000>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>; + qcom,stream-id-range = <&apps_smmu 0x0 0x400>; + }; + + anoc_2_tbu: tbu@151e1000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151e1000 0x0 0x1000>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>; + qcom,stream-id-range = <&apps_smmu 0x400 0x400>; + }; + + mnoc_hf_0_tbu: tbu@151e5000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151e5000 0x0 0x1000>; + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_HF0_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x800 0x400>; + }; + + mnoc_hf_1_tbu: tbu@151e9000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151e9000 0x0 0x1000>; + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_HF1_GDSC>; + qcom,stream-id-range = <&apps_smmu 0xc00 0x400>; + }; + + compute_dsp_0_tbu: tbu@151ed000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151ed000 0x0 0x1000>; + interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_TURING_MMU_TBU1_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x1000 0x400>; + }; + + compute_dsp_1_tbu: tbu@151f1000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151f1000 0x0 0x1000>; + interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_TURING_MMU_TBU0_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x1400 0x400>; + }; + + adsp_tbu: tbu@151f5000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151f5000 0x0 0x1000>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &lpass_ag_noc SLAVE_LPASS_CORE_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + qcom,stream-id-range = <&apps_smmu 0x1800 0x400>; + }; + + anoc_1_pcie_tbu: tbu@151f9000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151f9000 0x0 0x1000>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>; + qcom,stream-id-range = <&apps_smmu 0x1c00 0x400>; + }; + + mnoc_sf_0_tbu: tbu@151fd000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151fd000 0x0 0x1000>; + interconnects = <&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_SF0_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x2000 0x400>; + }; + intc: interrupt-controller@17a00000 { compatible = "arm,gic-v3"; reg = <0 0x17a00000 0 0x10000>, /* GICD */
WARNING: multiple messages have this Message-ID (diff)
From: Georgi Djakov <quic_c_gdjako@quicinc.com> To: <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>, <will@kernel.org>, <robin.murphy@arm.com>, <joro@8bytes.org>, <iommu@lists.linux.dev> Cc: <devicetree@vger.kernel.org>, <andersson@kernel.org>, <konrad.dybcio@linaro.org>, <robdclark@gmail.com>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>, <quic_cgoldswo@quicinc.com>, <quic_sukadev@quicinc.com>, <quic_pdaly@quicinc.com>, <quic_sudaraja@quicinc.com>, <djakov@kernel.org> Subject: [PATCH v6 7/7] arm64: dts: qcom: sc7280: Add DT nodes for the TBUs Date: Thu, 7 Mar 2024 11:05:25 -0800 [thread overview] Message-ID: <20240307190525.395291-8-quic_c_gdjako@quicinc.com> (raw) In-Reply-To: <20240307190525.395291-1-quic_c_gdjako@quicinc.com> Add the device-tree nodes for the TBUs (translation buffer units) that are present on the sc7280 platforms. The TBUs can be used debug the kernel and provide additional information when a context faults occur. Describe the all registers, clocks, interconnects and power-domain resources that are needed for each of the TBUs. Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com> --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 89 ++++++++++++++++++++++++++++ 1 file changed, 89 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 7e7f0f0fb41b..5d8aa182e3a9 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -2970,6 +2970,18 @@ adreno_smmu: iommu@3da0000 { dma-coherent; }; + gfx_0_tbu: tbu@3dd9000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x3dd9000 0x0 0x1000>; + qcom,stream-id-range = <&adreno_smmu 0x0 0x400>; + }; + + gfx_1_tbu: tbu@3ddd000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x3ddd000 0x0 0x1000>; + qcom,stream-id-range = <&adreno_smmu 0x400 0x400>; + }; + remoteproc_mpss: remoteproc@4080000 { compatible = "qcom,sc7280-mpss-pas"; reg = <0 0x04080000 0 0x10000>; @@ -5778,6 +5790,83 @@ apps_smmu: iommu@15000000 { <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; }; + anoc_1_tbu: tbu@151dd000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151dd000 0x0 0x1000>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>; + qcom,stream-id-range = <&apps_smmu 0x0 0x400>; + }; + + anoc_2_tbu: tbu@151e1000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151e1000 0x0 0x1000>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>; + qcom,stream-id-range = <&apps_smmu 0x400 0x400>; + }; + + mnoc_hf_0_tbu: tbu@151e5000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151e5000 0x0 0x1000>; + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_HF0_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x800 0x400>; + }; + + mnoc_hf_1_tbu: tbu@151e9000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151e9000 0x0 0x1000>; + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_HF1_GDSC>; + qcom,stream-id-range = <&apps_smmu 0xc00 0x400>; + }; + + compute_dsp_0_tbu: tbu@151ed000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151ed000 0x0 0x1000>; + interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_TURING_MMU_TBU1_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x1000 0x400>; + }; + + compute_dsp_1_tbu: tbu@151f1000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151f1000 0x0 0x1000>; + interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_TURING_MMU_TBU0_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x1400 0x400>; + }; + + adsp_tbu: tbu@151f5000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151f5000 0x0 0x1000>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &lpass_ag_noc SLAVE_LPASS_CORE_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + qcom,stream-id-range = <&apps_smmu 0x1800 0x400>; + }; + + anoc_1_pcie_tbu: tbu@151f9000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151f9000 0x0 0x1000>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>; + qcom,stream-id-range = <&apps_smmu 0x1c00 0x400>; + }; + + mnoc_sf_0_tbu: tbu@151fd000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151fd000 0x0 0x1000>; + interconnects = <&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_SF0_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x2000 0x400>; + }; + intc: interrupt-controller@17a00000 { compatible = "arm,gic-v3"; reg = <0 0x17a00000 0 0x10000>, /* GICD */ _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-03-07 19:06 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-03-07 19:05 [PATCH v6 0/7] Add support for Translation Buffer Units Georgi Djakov 2024-03-07 19:05 ` Georgi Djakov 2024-03-07 19:05 ` [PATCH v6 1/7] dt-bindings: iommu: Add Qualcomm TBU Georgi Djakov 2024-03-07 19:05 ` Georgi Djakov 2024-03-07 22:24 ` Rob Herring 2024-03-07 22:24 ` Rob Herring 2024-03-07 19:05 ` [PATCH v6 2/7] iommu/arm-smmu-qcom-tbu: Add Qualcomm TBU driver Georgi Djakov 2024-03-07 19:05 ` Georgi Djakov 2024-03-07 19:05 ` [PATCH v6 3/7] iommu/arm-smmu: Allow using a threaded handler for context interrupts Georgi Djakov 2024-03-07 19:05 ` Georgi Djakov 2024-03-07 19:05 ` [PATCH v6 4/7] iommu/arm-smmu-qcom: Use a custom context fault handler for sdm845 Georgi Djakov 2024-03-07 19:05 ` Georgi Djakov 2024-03-12 18:14 ` Konrad Dybcio 2024-03-12 18:14 ` Konrad Dybcio 2024-03-07 19:05 ` [PATCH v6 5/7] arm64: dts: qcom: sdm845: Add DT nodes for the TBUs Georgi Djakov 2024-03-07 19:05 ` Georgi Djakov 2024-03-07 19:05 ` [PATCH v6 6/7] iommu/arm-smmu-qcom: Use the custom fault handler on more platforms Georgi Djakov 2024-03-07 19:05 ` Georgi Djakov 2024-03-07 19:05 ` Georgi Djakov [this message] 2024-03-07 19:05 ` [PATCH v6 7/7] arm64: dts: qcom: sc7280: Add DT nodes for the TBUs Georgi Djakov
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240307190525.395291-8-quic_c_gdjako@quicinc.com \ --to=quic_c_gdjako@quicinc.com \ --cc=andersson@kernel.org \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=djakov@kernel.org \ --cc=iommu@lists.linux.dev \ --cc=joro@8bytes.org \ --cc=konrad.dybcio@linaro.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=quic_cgoldswo@quicinc.com \ --cc=quic_pdaly@quicinc.com \ --cc=quic_sudaraja@quicinc.com \ --cc=quic_sukadev@quicinc.com \ --cc=robdclark@gmail.com \ --cc=robh+dt@kernel.org \ --cc=robin.murphy@arm.com \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.