From: "Rafał Miłecki" <zajec5@gmail.com> To: Matthias Brugger <matthias.bgg@gmail.com>, AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>, Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org> Cc: "Chen-Yu Tsai" <wenst@chromium.org>, "Hsin-Yi Wang" <hsinyi@chromium.org>, "Nícolas F . R . A . Prado" <nfraprado@collabora.com>, "Heiko Stuebner" <heiko.stuebner@cherry.de>, "Jernej Skrabec" <jernej.skrabec@gmail.com>, "Chris Morgan" <macromorgan@hotmail.com>, "Linus Walleij" <linus.walleij@linaro.org>, "Sean Wang" <sean.wang@mediatek.com>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org, "Rafał Miłecki" <rafal@milecki.pl> Subject: [PATCH V3 4/4] arm64: dts: mediatek: Add Cudy WR3000 V1 Date: Sun, 17 Mar 2024 23:32:06 +0100 [thread overview] Message-ID: <20240317223206.22033-5-zajec5@gmail.com> (raw) In-Reply-To: <20240317223206.22033-1-zajec5@gmail.com> From: Rafał Miłecki <rafal@milecki.pl> Cudy WR3000 V1 is an MT7981B (AKA Filogic 820) based wireless router. It has 256 MiB of RAM, some LEDs & buttons and (not described yet) 4 Ethernet ports. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> --- V2: Reorder properties Describe online LED V3: Use LED_FUNCTION_WAN_ONLINE (present in torvalds/linux.git) arch/arm64/boot/dts/mediatek/Makefile | 1 + .../dts/mediatek/mt7981b-cudy-wr3000-v1.dts | 74 +++++++++++++++++++ 2 files changed, 75 insertions(+) create mode 100644 arch/arm64/boot/dts/mediatek/mt7981b-cudy-wr3000-v1.dts diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index 37b4ca3a87c9..96da4ad640aa 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7981b-cudy-wr3000-v1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7981b-xiaomi-ax3000t.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-acelink-ew-7886cax.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt7981b-cudy-wr3000-v1.dts b/arch/arm64/boot/dts/mediatek/mt7981b-cudy-wr3000-v1.dts new file mode 100644 index 000000000000..54101cc08a25 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7981b-cudy-wr3000-v1.dts @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +#include "mt7981b.dtsi" + +/ { + compatible = "cudy,wr3000-v1", "mediatek,mt7981b"; + model = "Cudy WR3000 V1"; + + memory@40000000 { + reg = <0 0x40000000 0 0x10000000>; + device_type = "memory"; + }; + + keys { + compatible = "gpio-keys"; + + key-wps { + label = "WPS"; + gpios = <&pio 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + + key-reset { + label = "RESET"; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_WAN; + gpios = <&pio 5 GPIO_ACTIVE_LOW>; + }; + + led-1 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_WLAN_2GHZ; + gpios = <&pio 6 GPIO_ACTIVE_LOW>; + }; + + led-2 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_WLAN_5GHZ; + gpios = <&pio 7 GPIO_ACTIVE_LOW>; + }; + + led-3 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_LAN; + gpios = <&pio 9 GPIO_ACTIVE_LOW>; + }; + + led-4 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&pio 10 GPIO_ACTIVE_LOW>; + }; + + led-5 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_WAN_ONLINE; + gpios = <&pio 11 GPIO_ACTIVE_LOW>; + }; + }; +}; -- 2.35.3
WARNING: multiple messages have this Message-ID (diff)
From: "Rafał Miłecki" <zajec5@gmail.com> To: Matthias Brugger <matthias.bgg@gmail.com>, AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>, Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org> Cc: "Chen-Yu Tsai" <wenst@chromium.org>, "Hsin-Yi Wang" <hsinyi@chromium.org>, "Nícolas F . R . A . Prado" <nfraprado@collabora.com>, "Heiko Stuebner" <heiko.stuebner@cherry.de>, "Jernej Skrabec" <jernej.skrabec@gmail.com>, "Chris Morgan" <macromorgan@hotmail.com>, "Linus Walleij" <linus.walleij@linaro.org>, "Sean Wang" <sean.wang@mediatek.com>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org, "Rafał Miłecki" <rafal@milecki.pl> Subject: [PATCH V3 4/4] arm64: dts: mediatek: Add Cudy WR3000 V1 Date: Sun, 17 Mar 2024 23:32:06 +0100 [thread overview] Message-ID: <20240317223206.22033-5-zajec5@gmail.com> (raw) In-Reply-To: <20240317223206.22033-1-zajec5@gmail.com> From: Rafał Miłecki <rafal@milecki.pl> Cudy WR3000 V1 is an MT7981B (AKA Filogic 820) based wireless router. It has 256 MiB of RAM, some LEDs & buttons and (not described yet) 4 Ethernet ports. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> --- V2: Reorder properties Describe online LED V3: Use LED_FUNCTION_WAN_ONLINE (present in torvalds/linux.git) arch/arm64/boot/dts/mediatek/Makefile | 1 + .../dts/mediatek/mt7981b-cudy-wr3000-v1.dts | 74 +++++++++++++++++++ 2 files changed, 75 insertions(+) create mode 100644 arch/arm64/boot/dts/mediatek/mt7981b-cudy-wr3000-v1.dts diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index 37b4ca3a87c9..96da4ad640aa 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7981b-cudy-wr3000-v1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7981b-xiaomi-ax3000t.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-acelink-ew-7886cax.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt7981b-cudy-wr3000-v1.dts b/arch/arm64/boot/dts/mediatek/mt7981b-cudy-wr3000-v1.dts new file mode 100644 index 000000000000..54101cc08a25 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7981b-cudy-wr3000-v1.dts @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +#include "mt7981b.dtsi" + +/ { + compatible = "cudy,wr3000-v1", "mediatek,mt7981b"; + model = "Cudy WR3000 V1"; + + memory@40000000 { + reg = <0 0x40000000 0 0x10000000>; + device_type = "memory"; + }; + + keys { + compatible = "gpio-keys"; + + key-wps { + label = "WPS"; + gpios = <&pio 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + + key-reset { + label = "RESET"; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_WAN; + gpios = <&pio 5 GPIO_ACTIVE_LOW>; + }; + + led-1 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_WLAN_2GHZ; + gpios = <&pio 6 GPIO_ACTIVE_LOW>; + }; + + led-2 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_WLAN_5GHZ; + gpios = <&pio 7 GPIO_ACTIVE_LOW>; + }; + + led-3 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_LAN; + gpios = <&pio 9 GPIO_ACTIVE_LOW>; + }; + + led-4 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&pio 10 GPIO_ACTIVE_LOW>; + }; + + led-5 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_WAN_ONLINE; + gpios = <&pio 11 GPIO_ACTIVE_LOW>; + }; + }; +}; -- 2.35.3 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-03-17 22:32 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-03-17 22:32 [PATCH V3 0/4] dts: mediatek: add Cudy WR3000 V1 wireless router Rafał Miłecki 2024-03-17 22:32 ` Rafał Miłecki 2024-03-17 22:32 ` [PATCH V3 1/4] dt-bindings: vendor-prefixes: add Cudy Rafał Miłecki 2024-03-17 22:32 ` Rafał Miłecki 2024-03-17 22:32 ` [PATCH V3 2/4] dt-bindings: arm64: dts: mediatek: Add Cudy WR3000 V1 router Rafał Miłecki 2024-03-17 22:32 ` Rafał Miłecki 2024-03-17 22:32 ` [PATCH V3 3/4] arm64: dts: mediatek: mt7981: add pinctrl Rafał Miłecki 2024-03-17 22:32 ` Rafał Miłecki 2024-03-17 22:32 ` Rafał Miłecki [this message] 2024-03-17 22:32 ` [PATCH V3 4/4] arm64: dts: mediatek: Add Cudy WR3000 V1 Rafał Miłecki 2024-03-18 10:28 ` AngeloGioacchino Del Regno 2024-03-18 10:28 ` AngeloGioacchino Del Regno 2024-04-03 10:30 ` [PATCH V3 0/4] dts: mediatek: add Cudy WR3000 V1 wireless router AngeloGioacchino Del Regno 2024-04-03 10:30 ` AngeloGioacchino Del Regno
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240317223206.22033-5-zajec5@gmail.com \ --to=zajec5@gmail.com \ --cc=angelogioacchino.delregno@collabora.com \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=heiko.stuebner@cherry.de \ --cc=hsinyi@chromium.org \ --cc=jernej.skrabec@gmail.com \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mediatek@lists.infradead.org \ --cc=macromorgan@hotmail.com \ --cc=matthias.bgg@gmail.com \ --cc=nfraprado@collabora.com \ --cc=rafal@milecki.pl \ --cc=robh@kernel.org \ --cc=sean.wang@mediatek.com \ --cc=wenst@chromium.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.