All of lore.kernel.org
 help / color / mirror / Atom feed
From: Judith Mendez <jm@ti.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
	Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrew Davis <afd@ti.com>, <linux-mmc@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH v4 3/7] mmc: sdhci_am654: Add OTAP/ITAP delay enable
Date: Mon, 18 Mar 2024 14:11:38 -0500	[thread overview]
Message-ID: <20240318191143.27638-4-jm@ti.com> (raw)
In-Reply-To: <20240318191143.27638-1-jm@ti.com>

Currently the OTAP/ITAP delay enable functionality is incorrect in
the am654_set_clock function. The OTAP delay is not enabled when
timing < SDR25 bus speed mode. The ITAP delay is not enabled for
timings that do not carry out tuning.

Add this OTAP/ITAP delay functionality according to the datasheet
[1] OTAPDLYENA and ITAPDLYENA for MMC0.

[1] https://www.ti.com/lit/ds/symlink/am62p.pdf

Fixes: 8ee5fc0e0b3b ("mmc: sdhci_am654: Update OTAPDLY writes")
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
---
Changelog:
v3->v4:
- Add acked-by
---
 drivers/mmc/host/sdhci_am654.c | 40 ++++++++++++++++++++++------------
 1 file changed, 26 insertions(+), 14 deletions(-)

diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c
index d079b25ef4c9..ac264b1455af 100644
--- a/drivers/mmc/host/sdhci_am654.c
+++ b/drivers/mmc/host/sdhci_am654.c
@@ -143,6 +143,7 @@ struct sdhci_am654_data {
 	struct regmap *base;
 	int otap_del_sel[ARRAY_SIZE(td)];
 	int itap_del_sel[ARRAY_SIZE(td)];
+	u32 itap_del_ena[ARRAY_SIZE(td)];
 	int clkbuf_sel;
 	int trm_icp;
 	int drv_strength;
@@ -239,11 +240,13 @@ static void sdhci_am654_setup_dll(struct sdhci_host *host, unsigned int clock)
 }
 
 static void sdhci_am654_write_itapdly(struct sdhci_am654_data *sdhci_am654,
-				      u32 itapdly)
+				      u32 itapdly, u32 enable)
 {
 	/* Set ITAPCHGWIN before writing to ITAPDLY */
 	regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPCHGWIN_MASK,
 			   1 << ITAPCHGWIN_SHIFT);
+	regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPDLYENA_MASK,
+			   enable << ITAPDLYENA_SHIFT);
 	regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPDLYSEL_MASK,
 			   itapdly << ITAPDLYSEL_SHIFT);
 	regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPCHGWIN_MASK, 0);
@@ -260,8 +263,8 @@ static void sdhci_am654_setup_delay_chain(struct sdhci_am654_data *sdhci_am654,
 	mask = SELDLYTXCLK_MASK | SELDLYRXCLK_MASK;
 	regmap_update_bits(sdhci_am654->base, PHY_CTRL5, mask, val);
 
-	sdhci_am654_write_itapdly(sdhci_am654,
-				  sdhci_am654->itap_del_sel[timing]);
+	sdhci_am654_write_itapdly(sdhci_am654, sdhci_am654->itap_del_sel[timing],
+				  sdhci_am654->itap_del_ena[timing]);
 }
 
 static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock)
@@ -270,7 +273,6 @@ static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock)
 	struct sdhci_am654_data *sdhci_am654 = sdhci_pltfm_priv(pltfm_host);
 	unsigned char timing = host->mmc->ios.timing;
 	u32 otap_del_sel;
-	u32 otap_del_ena;
 	u32 mask, val;
 
 	regmap_update_bits(sdhci_am654->base, PHY_CTRL1, ENDLL_MASK, 0);
@@ -279,10 +281,9 @@ static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock)
 
 	/* Setup DLL Output TAP delay */
 	otap_del_sel = sdhci_am654->otap_del_sel[timing];
-	otap_del_ena = (timing > MMC_TIMING_UHS_SDR25) ? 1 : 0;
 
 	mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK;
-	val = (otap_del_ena << OTAPDLYENA_SHIFT) |
+	val = (0x1 << OTAPDLYENA_SHIFT) |
 	      (otap_del_sel << OTAPDLYSEL_SHIFT);
 
 	/* Write to STRBSEL for HS400 speed mode */
@@ -300,7 +301,8 @@ static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock)
 	if (timing > MMC_TIMING_UHS_SDR25 && clock >= CLOCK_TOO_SLOW_HZ) {
 		sdhci_am654_setup_dll(host, clock);
 		sdhci_am654->dll_enable = true;
-		sdhci_am654_write_itapdly(sdhci_am654, sdhci_am654->itap_del_sel[timing]);
+		sdhci_am654_write_itapdly(sdhci_am654, sdhci_am654->itap_del_sel[timing],
+					  sdhci_am654->itap_del_ena[timing]);
 	} else {
 		sdhci_am654_setup_delay_chain(sdhci_am654, timing);
 	}
@@ -316,6 +318,7 @@ static void sdhci_j721e_4bit_set_clock(struct sdhci_host *host,
 	struct sdhci_am654_data *sdhci_am654 = sdhci_pltfm_priv(pltfm_host);
 	unsigned char timing = host->mmc->ios.timing;
 	u32 otap_del_sel;
+	u32 itap_del_ena;
 	u32 mask, val;
 
 	/* Setup DLL Output TAP delay */
@@ -324,6 +327,12 @@ static void sdhci_j721e_4bit_set_clock(struct sdhci_host *host,
 	mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK;
 	val = (0x1 << OTAPDLYENA_SHIFT) |
 	      (otap_del_sel << OTAPDLYSEL_SHIFT);
+
+	itap_del_ena = sdhci_am654->itap_del_ena[timing];
+
+	mask |= ITAPDLYENA_MASK;
+	val |= (itap_del_ena << ITAPDLYENA_SHIFT);
+
 	regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, val);
 
 	regmap_update_bits(sdhci_am654->base, PHY_CTRL5, CLKBUFSEL_MASK,
@@ -477,6 +486,7 @@ static int sdhci_am654_platform_execute_tuning(struct sdhci_host *host,
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_am654_data *sdhci_am654 = sdhci_pltfm_priv(pltfm_host);
+	unsigned char timing = host->mmc->ios.timing;
 	struct window fail_window[ITAPDLY_LENGTH];
 	u8 curr_pass, itap;
 	u8 fail_index = 0;
@@ -485,11 +495,10 @@ static int sdhci_am654_platform_execute_tuning(struct sdhci_host *host,
 	memset(fail_window, 0, sizeof(fail_window));
 
 	/* Enable ITAPDLY */
-	regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPDLYENA_MASK,
-			   1 << ITAPDLYENA_SHIFT);
+	sdhci_am654->itap_del_ena[timing] = 0x1;
 
 	for (itap = 0; itap < ITAPDLY_LENGTH; itap++) {
-		sdhci_am654_write_itapdly(sdhci_am654, itap);
+		sdhci_am654_write_itapdly(sdhci_am654, itap, sdhci_am654->itap_del_ena[timing]);
 
 		curr_pass = !mmc_send_tuning(host->mmc, opcode, NULL);
 
@@ -513,7 +522,7 @@ static int sdhci_am654_platform_execute_tuning(struct sdhci_host *host,
 	itap = sdhci_am654_calculate_itap(host, fail_window, fail_index,
 					  sdhci_am654->dll_enable);
 
-	sdhci_am654_write_itapdly(sdhci_am654, itap);
+	sdhci_am654_write_itapdly(sdhci_am654, itap, sdhci_am654->itap_del_ena[timing]);
 
 	return 0;
 }
@@ -662,9 +671,12 @@ static int sdhci_am654_get_otap_delay(struct sdhci_host *host,
 				host->mmc->caps2 &= ~td[i].capability;
 		}
 
-		if (td[i].itap_binding)
-			device_property_read_u32(dev, td[i].itap_binding,
-						 &sdhci_am654->itap_del_sel[i]);
+		if (td[i].itap_binding) {
+			ret = device_property_read_u32(dev, td[i].itap_binding,
+						       &sdhci_am654->itap_del_sel[i]);
+			if (!ret)
+				sdhci_am654->itap_del_ena[i] = 0x1;
+		}
 	}
 
 	return 0;
-- 
2.43.2


  parent reply	other threads:[~2024-03-18 19:11 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-18 19:11 [PATCH v4 0/7] Add tuning algorithm for delay chain Judith Mendez
2024-03-18 19:11 ` [PATCH v4 1/7] mmc: sdhci_am654: " Judith Mendez
2024-03-18 19:11 ` [PATCH v4 2/7] mmc: sdhci_am654: Write ITAPDLY for DDR52 timing Judith Mendez
2024-03-18 19:11 ` Judith Mendez [this message]
2024-03-18 19:11 ` [PATCH v4 4/7] mmc: sdhci_am654: Fix itapdly/otapdly array type Judith Mendez
2024-03-18 19:11 ` [PATCH v4 5/7] mmc: sdhci_am654: Update comments in sdhci_am654_set_clock Judith Mendez
2024-03-18 19:11 ` [PATCH v4 6/7] mmc: sdhci_am654: Add ITAPDLYSEL in sdhci_j721e_4bit_set_clock Judith Mendez
2024-03-18 19:11 ` [PATCH v4 7/7] mmc: sdhci_am654: Fix ITAPDLY for HS400 timing Judith Mendez

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240318191143.27638-4-jm@ti.com \
    --to=jm@ti.com \
    --cc=adrian.hunter@intel.com \
    --cc=afd@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.