All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nicolas Pitre <nico@fluxnic.net>
To: Daniel Lezcano <daniel.lezcano@linaro.org>,
	linux-pm@vger.kernel.org, linux-mediatek@lists.infradead.org,
	devicetree@vger.kernel.org
Cc: Nicolas Pitre <npitre@baylibre.com>
Subject: [PATCH v2 03/13] thermal/drivers/mediatek/lvts_thermal: use offsets for every calibration byte
Date: Mon, 18 Mar 2024 17:22:05 -0400	[thread overview]
Message-ID: <20240318212428.3843952-4-nico@fluxnic.net> (raw)
In-Reply-To: <20240318212428.3843952-1-nico@fluxnic.net>

From: Nicolas Pitre <npitre@baylibre.com>

Current code assumes calibration values are always stored contiguously
in host endian order. A future patch will prove this wrong.

Let's specify the offset for each calibration byte instead.

Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
---
 drivers/thermal/mediatek/lvts_thermal.c | 165 ++++++++++++++----------
 1 file changed, 99 insertions(+), 66 deletions(-)

diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index 73ca2be0f5..2c346ea7c6 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -102,11 +102,11 @@ static int golden_temp_offset;
 
 struct lvts_sensor_data {
 	int dt_id;
+	u8 cal_offsets[3];
 };
 
 struct lvts_ctrl_data {
 	struct lvts_sensor_data lvts_sensor[LVTS_SENSOR_MAX];
-	int cal_offset[LVTS_SENSOR_MAX];
 	int hw_tshut_temp;
 	int num_lvts_sensor;
 	int offset;
@@ -668,8 +668,9 @@ static int lvts_sensor_init(struct device *dev, struct lvts_ctrl *lvts_ctrl,
  * <-----ap--tc#3-----> <-----sensor#7-----> <-----sensor#8----->
  *  0x40 | 0x41 | 0x42 | 0x43 | 0x44 | 0x45 | 0x46 | 0x47 | 0x48
  *
- * The data description gives the offset of the calibration data in
- * this bytes stream for each sensor.
+ * Note: In some cases, values don't strictly follow a little endian ordering.
+ * The data description gives byte offsets constituting each calibration value
+ * for each sensor.
  */
 static int lvts_calibration_init(struct device *dev, struct lvts_ctrl *lvts_ctrl,
 					const struct lvts_ctrl_data *lvts_ctrl_data,
@@ -677,9 +678,15 @@ static int lvts_calibration_init(struct device *dev, struct lvts_ctrl *lvts_ctrl
 {
 	int i;
 
-	for (i = 0; i < lvts_ctrl_data->num_lvts_sensor; i++)
-		memcpy(&lvts_ctrl->calibration[i],
-		       efuse_calibration + lvts_ctrl_data->cal_offset[i], 3);
+	for (i = 0; i < lvts_ctrl_data->num_lvts_sensor; i++) {
+		const struct lvts_sensor_data *sensor =
+					&lvts_ctrl_data->lvts_sensor[i];
+
+		lvts_ctrl->calibration[i] =
+			(efuse_calibration[sensor->cal_offsets[0]] << 0) +
+			(efuse_calibration[sensor->cal_offsets[1]] << 8) +
+			(efuse_calibration[sensor->cal_offsets[2]] << 16);
+	}
 
 	return 0;
 }
@@ -1300,24 +1307,30 @@ static void lvts_remove(struct platform_device *pdev)
 
 static const struct lvts_ctrl_data mt7988_lvts_ap_data_ctrl[] = {
 	{
-		.cal_offset = { 0x00, 0x04, 0x08, 0x0c },
 		.lvts_sensor = {
-			{ .dt_id = MT7988_CPU_0 },
-			{ .dt_id = MT7988_CPU_1 },
-			{ .dt_id = MT7988_ETH2P5G_0 },
-			{ .dt_id = MT7988_ETH2P5G_1 }
+			{ .dt_id = MT7988_CPU_0,
+			  .cal_offsets = { 0x00, 0x01, 0x02 } },
+			{ .dt_id = MT7988_CPU_1,
+			  .cal_offsets = { 0x04, 0x05, 0x06 } },
+			{ .dt_id = MT7988_ETH2P5G_0,
+			  .cal_offsets = { 0x08, 0x09, 0x0a } },
+			{ .dt_id = MT7988_ETH2P5G_1,
+			  .cal_offsets = { 0x0c, 0x0d, 0x0e } }
 		},
 		.num_lvts_sensor = 4,
 		.offset = 0x0,
 		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT7988,
 	},
 	{
-		.cal_offset = { 0x14, 0x18, 0x1c, 0x20 },
 		.lvts_sensor = {
-			{ .dt_id = MT7988_TOPS_0},
-			{ .dt_id = MT7988_TOPS_1},
-			{ .dt_id = MT7988_ETHWARP_0},
-			{ .dt_id = MT7988_ETHWARP_1}
+			{ .dt_id = MT7988_TOPS_0,
+			   .cal_offsets = { 0x14, 0x15, 0x16 } },
+			{ .dt_id = MT7988_TOPS_1,
+			   .cal_offsets = { 0x18, 0x19, 0x1a } },
+			{ .dt_id = MT7988_ETHWARP_0,
+			   .cal_offsets = { 0x1c, 0x1d, 0x1e } },
+			{ .dt_id = MT7988_ETHWARP_1,
+			   .cal_offsets = { 0x20, 0x21, 0x22 } }
 		},
 		.num_lvts_sensor = 4,
 		.offset = 0x100,
@@ -1359,10 +1372,11 @@ static int lvts_resume(struct device *dev)
 
 static const struct lvts_ctrl_data mt8192_lvts_mcu_data_ctrl[] = {
 	{
-		.cal_offset = { 0x04, 0x08 },
 		.lvts_sensor = {
-			{ .dt_id = MT8192_MCU_BIG_CPU0 },
-			{ .dt_id = MT8192_MCU_BIG_CPU1 }
+			{ .dt_id = MT8192_MCU_BIG_CPU0,
+			  .cal_offsets = { 0x04, 0x05, 0x06 } },
+			{ .dt_id = MT8192_MCU_BIG_CPU1,
+			  .cal_offsets = { 0x08, 0x09, 0x0a } }
 		},
 		.num_lvts_sensor = 2,
 		.offset = 0x0,
@@ -1370,10 +1384,11 @@ static const struct lvts_ctrl_data mt8192_lvts_mcu_data_ctrl[] = {
 		.mode = LVTS_MSR_FILTERED_MODE,
 	},
 	{
-		.cal_offset = { 0x0c, 0x10 },
 		.lvts_sensor = {
-			{ .dt_id = MT8192_MCU_BIG_CPU2 },
-			{ .dt_id = MT8192_MCU_BIG_CPU3 }
+			{ .dt_id = MT8192_MCU_BIG_CPU2,
+			  .cal_offsets = { 0x0c, 0x0d, 0x0e } },
+			{ .dt_id = MT8192_MCU_BIG_CPU3,
+			  .cal_offsets = { 0x10, 0x11, 0x12 } }
 		},
 		.num_lvts_sensor = 2,
 		.offset = 0x100,
@@ -1381,12 +1396,15 @@ static const struct lvts_ctrl_data mt8192_lvts_mcu_data_ctrl[] = {
 		.mode = LVTS_MSR_FILTERED_MODE,
 	},
 	{
-		.cal_offset = { 0x14, 0x18, 0x1c, 0x20 },
 		.lvts_sensor = {
-			{ .dt_id = MT8192_MCU_LITTLE_CPU0 },
-			{ .dt_id = MT8192_MCU_LITTLE_CPU1 },
-			{ .dt_id = MT8192_MCU_LITTLE_CPU2 },
-			{ .dt_id = MT8192_MCU_LITTLE_CPU3 }
+			{ .dt_id = MT8192_MCU_LITTLE_CPU0,
+			  .cal_offsets = { 0x14, 0x15, 0x16 } },
+			{ .dt_id = MT8192_MCU_LITTLE_CPU1,
+			  .cal_offsets = { 0x18, 0x19, 0x1a } },
+			{ .dt_id = MT8192_MCU_LITTLE_CPU2,
+			  .cal_offsets = { 0x1c, 0x1d, 0x1e } },
+			{ .dt_id = MT8192_MCU_LITTLE_CPU3,
+			  .cal_offsets = { 0x20, 0x21, 0x22 } }
 		},
 		.num_lvts_sensor = 4,
 		.offset = 0x200,
@@ -1396,42 +1414,47 @@ static const struct lvts_ctrl_data mt8192_lvts_mcu_data_ctrl[] = {
 };
 
 static const struct lvts_ctrl_data mt8192_lvts_ap_data_ctrl[] = {
-		{
-		.cal_offset = { 0x24, 0x28 },
+	{
 		.lvts_sensor = {
-			{ .dt_id = MT8192_AP_VPU0 },
-			{ .dt_id = MT8192_AP_VPU1 }
+			{ .dt_id = MT8192_AP_VPU0,
+			  .cal_offsets = { 0x24, 0x25, 0x26 } },
+			{ .dt_id = MT8192_AP_VPU1,
+			  .cal_offsets = { 0x28, 0x29, 0x2a } }
 		},
 		.num_lvts_sensor = 2,
 		.offset = 0x0,
 		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
 	},
 	{
-		.cal_offset = { 0x2c, 0x30 },
 		.lvts_sensor = {
-			{ .dt_id = MT8192_AP_GPU0 },
-			{ .dt_id = MT8192_AP_GPU1 }
+			{ .dt_id = MT8192_AP_GPU0,
+			  .cal_offsets = { 0x2c, 0x2d, 0x2e } },
+			{ .dt_id = MT8192_AP_GPU1,
+			  .cal_offsets = { 0x30, 0x31, 0x32 } }
 		},
 		.num_lvts_sensor = 2,
 		.offset = 0x100,
 		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
 	},
 	{
-		.cal_offset = { 0x34, 0x38 },
 		.lvts_sensor = {
-			{ .dt_id = MT8192_AP_INFRA },
-			{ .dt_id = MT8192_AP_CAM },
+			{ .dt_id = MT8192_AP_INFRA,
+			  .cal_offsets = { 0x34, 0x35, 0x36 } },
+			{ .dt_id = MT8192_AP_CAM,
+			  .cal_offsets = { 0x38, 0x39, 0x3a } },
 		},
 		.num_lvts_sensor = 2,
 		.offset = 0x200,
 		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
 	},
 	{
-		.cal_offset = { 0x3c, 0x40, 0x44 },
 		.lvts_sensor = {
-			{ .dt_id = MT8192_AP_MD0 },
-			{ .dt_id = MT8192_AP_MD1 },
-			{ .dt_id = MT8192_AP_MD2 }
+			{ .dt_id = MT8192_AP_MD0,
+			  .cal_offsets = { 0x3c, 0x3d, 0x3e } },
+			{ .dt_id = MT8192_AP_MD1,
+			  .cal_offsets = { 0x40, 0x41, 0x42 } },
+			{ .dt_id = MT8192_AP_MD2,
+			  .cal_offsets = { 0x44, 0x45, 0x46 } }
 		},
 		.num_lvts_sensor = 3,
 		.offset = 0x300,
@@ -1441,32 +1464,37 @@ static const struct lvts_ctrl_data mt8192_lvts_ap_data_ctrl[] = {
 
 static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = {
 	{
-		.cal_offset = { 0x04, 0x07 },
 		.lvts_sensor = {
-			{ .dt_id = MT8195_MCU_BIG_CPU0 },
-			{ .dt_id = MT8195_MCU_BIG_CPU1 }
+			{ .dt_id = MT8195_MCU_BIG_CPU0,
+			  .cal_offsets = { 0x04, 0x05, 0x06 } },
+			{ .dt_id = MT8195_MCU_BIG_CPU1,
+			  .cal_offsets = { 0x07, 0x08, 0x09 } }
 		},
 		.num_lvts_sensor = 2,
 		.offset = 0x0,
 		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195,
 	},
 	{
-		.cal_offset = { 0x0d, 0x10 },
 		.lvts_sensor = {
-			{ .dt_id = MT8195_MCU_BIG_CPU2 },
-			{ .dt_id = MT8195_MCU_BIG_CPU3 }
+			{ .dt_id = MT8195_MCU_BIG_CPU2,
+			  .cal_offsets = { 0x0d, 0x0e, 0x0f } },
+			{ .dt_id = MT8195_MCU_BIG_CPU3,
+			  .cal_offsets = { 0x10, 0x11, 0x12 } }
 		},
 		.num_lvts_sensor = 2,
 		.offset = 0x100,
 		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195,
 	},
 	{
-		.cal_offset = { 0x16, 0x19, 0x1c, 0x1f },
 		.lvts_sensor = {
-			{ .dt_id = MT8195_MCU_LITTLE_CPU0 },
-			{ .dt_id = MT8195_MCU_LITTLE_CPU1 },
-			{ .dt_id = MT8195_MCU_LITTLE_CPU2 },
-			{ .dt_id = MT8195_MCU_LITTLE_CPU3 }
+			{ .dt_id = MT8195_MCU_LITTLE_CPU0,
+			  .cal_offsets = { 0x16, 0x17, 0x18 } },
+			{ .dt_id = MT8195_MCU_LITTLE_CPU1,
+			  .cal_offsets = { 0x19, 0x1a, 0x1b } },
+			{ .dt_id = MT8195_MCU_LITTLE_CPU2,
+			  .cal_offsets = { 0x1c, 0x1d, 0x1e } },
+			{ .dt_id = MT8195_MCU_LITTLE_CPU3,
+			  .cal_offsets = { 0x1f, 0x20, 0x21 } }
 		},
 		.num_lvts_sensor = 4,
 		.offset = 0x200,
@@ -1475,42 +1503,47 @@ static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = {
 };
 
 static const struct lvts_ctrl_data mt8195_lvts_ap_data_ctrl[] = {
-		{
-		.cal_offset = { 0x25, 0x28 },
+	{
 		.lvts_sensor = {
-			{ .dt_id = MT8195_AP_VPU0 },
-			{ .dt_id = MT8195_AP_VPU1 }
+			{ .dt_id = MT8195_AP_VPU0,
+			  .cal_offsets = { 0x25, 0x26, 0x27 } },
+			{ .dt_id = MT8195_AP_VPU1,
+			  .cal_offsets = { 0x28, 0x29, 0x2a } }
 		},
 		.num_lvts_sensor = 2,
 		.offset = 0x0,
 		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195,
 	},
 	{
-		.cal_offset = { 0x2e, 0x31 },
 		.lvts_sensor = {
-			{ .dt_id = MT8195_AP_GPU0 },
-			{ .dt_id = MT8195_AP_GPU1 }
+			{ .dt_id = MT8195_AP_GPU0,
+			  .cal_offsets = { 0x2e, 0x2f, 0x30 } },
+			{ .dt_id = MT8195_AP_GPU1,
+			  .cal_offsets = { 0x31, 0x32, 0x33 } }
 		},
 		.num_lvts_sensor = 2,
 		.offset = 0x100,
 		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195,
 	},
 	{
-		.cal_offset = { 0x37, 0x3a, 0x3d },
 		.lvts_sensor = {
-			{ .dt_id = MT8195_AP_VDEC },
-			{ .dt_id = MT8195_AP_IMG },
-			{ .dt_id = MT8195_AP_INFRA },
+			{ .dt_id = MT8195_AP_VDEC,
+			  .cal_offsets = { 0x37, 0x38, 0x39 } },
+			{ .dt_id = MT8195_AP_IMG,
+			  .cal_offsets = { 0x3a, 0x3b, 0x3c } },
+			{ .dt_id = MT8195_AP_INFRA,
+			  .cal_offsets = { 0x3d, 0x3e, 0x3f } }
 		},
 		.num_lvts_sensor = 3,
 		.offset = 0x200,
 		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195,
 	},
 	{
-		.cal_offset = { 0x43, 0x46 },
 		.lvts_sensor = {
-			{ .dt_id = MT8195_AP_CAM0 },
-			{ .dt_id = MT8195_AP_CAM1 }
+			{ .dt_id = MT8195_AP_CAM0,
+			  .cal_offsets = { 0x43, 0x44, 0x45 } },
+			{ .dt_id = MT8195_AP_CAM1,
+			  .cal_offsets = { 0x46, 0x47, 0x48 } }
 		},
 		.num_lvts_sensor = 2,
 		.offset = 0x300,
-- 
2.44.0


  parent reply	other threads:[~2024-03-18 21:24 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-18 21:22 [PATCH v2 0/13] Mediatek thermal sensor driver support for MT8186 and MT8188 Nicolas Pitre
2024-03-18 21:22 ` [PATCH v2 01/13] thermal/drivers/mediatek/lvts_thermal: retrieve all calibration bytes Nicolas Pitre
2024-03-19 11:40   ` AngeloGioacchino Del Regno
2024-03-20 15:32     ` Rob Herring
2024-03-18 21:22 ` [PATCH v2 02/13] thermal/drivers/mediatek/lvts_thermal: move comment Nicolas Pitre
2024-03-18 21:22 ` Nicolas Pitre [this message]
2024-03-18 21:22 ` [PATCH v2 04/13] thermal/drivers/mediatek/lvts_thermal: guard against efuse data buffer overflow Nicolas Pitre
2024-03-18 21:22 ` [PATCH v2 05/13] dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT8186 Nicolas Pitre
2024-03-19 11:45   ` AngeloGioacchino Del Regno
2024-03-18 21:22 ` [PATCH v2 06/13] arm64: dts: mediatek: mt8186: add lvts definitions Nicolas Pitre
2024-03-19 11:47   ` AngeloGioacchino Del Regno
2024-03-18 21:22 ` [PATCH v2 07/13] thermal/drivers/mediatek/lvts_thermal: add MT8186 support Nicolas Pitre
2024-03-19 11:48   ` AngeloGioacchino Del Regno
2024-03-18 21:22 ` [PATCH v2 08/13] arm64: dts: mediatek: mt8186: add default thermal zones Nicolas Pitre
2024-03-19 11:49   ` AngeloGioacchino Del Regno
2024-03-20 21:52     ` Nicolas Pitre
2024-03-21  8:32       ` AngeloGioacchino Del Regno
2024-03-18 21:22 ` [PATCH v2 09/13] thermal/drivers/mediatek/lvts_thermal: provision for gt variable location Nicolas Pitre
2024-03-18 21:22 ` [PATCH v2 10/13] thermal/drivers/mediatek/lvts_thermal: allow early empty sensor slots Nicolas Pitre
2024-03-18 21:22 ` [PATCH v2 11/13] dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT8188 Nicolas Pitre
2024-03-18 21:22 ` [PATCH v2 12/13] thermal/drivers/mediatek/lvts_thermal: add MT8188 support Nicolas Pitre
2024-03-19 11:51   ` AngeloGioacchino Del Regno
2024-03-18 21:22 ` [PATCH v2 13/13] arm64: dts: mediatek: mt8188: add default thermal zones Nicolas Pitre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240318212428.3843952-4-nico@fluxnic.net \
    --to=nico@fluxnic.net \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=npitre@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.