[PATCH 2/2] dt-bindings: hwmon: max6650: convert to dtschema

[Javier Carrasco <javier.carrasco.cruz@gmail.com>]

 Convert existing bindings to dtschema to support validation.

 This is a straightforward conversion with no new properties.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
---
 .../devicetree/bindings/hwmon/max6650.txt          | 28 ---------
 .../devicetree/bindings/hwmon/maxim,max6650.yaml   | 68 ++++++++++++++++++++++
 2 files changed, 68 insertions(+), 28 deletions(-)

diff --git a/Documentation/devicetree/bindings/hwmon/max6650.txt b/Documentation/devicetree/bindings/hwmon/max6650.txt
deleted file mode 100644
index f6bd87d8e284..000000000000
--- a/Documentation/devicetree/bindings/hwmon/max6650.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Bindings for MAX6651 and MAX6650 I2C fan controllers
-
-Reference:
-[1]	https://datasheets.maximintegrated.com/en/ds/MAX6650-MAX6651.pdf
-
-Required properties:
-- compatible : One of "maxim,max6650" or "maxim,max6651"
-- reg        : I2C address, one of 0x1b, 0x1f, 0x4b, 0x48.
-
-Optional properties, default is to retain the chip's current setting:
-- maxim,fan-microvolt : The supply voltage of the fan, either 5000000 uV or
-			12000000 uV.
-- maxim,fan-prescale  : Pre-scaling value, as per datasheet [1]. Lower values
-			allow more fine-grained control of slower fans.
-			Valid: 1, 2, 4, 8, 16.
-- maxim,fan-target-rpm: Initial requested fan rotation speed. If specified, the
-			driver selects closed-loop mode and the requested speed.
-			This ensures the fan is already running before userspace
-			takes over.
-
-Example:
-	fan-max6650: max6650@1b {
-		reg = <0x1b>;
-		compatible = "maxim,max6650";
-		maxim,fan-microvolt = <12000000>;
-		maxim,fan-prescale = <4>;
-		maxim,fan-target-rpm = <1200>;
-	};
diff --git a/Documentation/devicetree/bindings/hwmon/maxim,max6650.yaml b/Documentation/devicetree/bindings/hwmon/maxim,max6650.yaml
new file mode 100644
index 000000000000..1b33b5fb606d
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/maxim,max6650.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/maxim,max6650.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX6650 and MAX6651 I2C Fan Controllers
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description: |
+  The MAX6650 and MAX6651 regulate and monitor the speed
+  of 5VDC/12VDC burshless fans with built-in tachometers.
+
+  Datasheets:
+    https://datasheets.maximintegrated.com/en/ds/MAX6650-MAX6651.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max6650
+      - maxim,max6651
+
+  reg:
+    maxItems: 1
+
+  maxim,fan-microvolt:
+    description:
+      The supply voltage of the fan, either 5000000 uV or
+      12000000 uV.
+
+  maxim,fan-prescale:
+    description:
+      Pre-scaling value, as per datasheet. Lower values
+      allow more fine-grained control of slower fans.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8, 16]
+
+  maxim,fan-target-rpm:
+    description:
+      Initial requested fan rotation speed. If specified, the
+      driver selects closed-loop mode and the requested speed.
+      This ensures the fan is already running before userspace
+      takes over.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fan-controller@1b {
+            compatible = "maxim,max6650";
+            reg = <0x1b>;
+            maxim,fan-microvolt = <12000000>;
+            maxim,fan-prescale = <4>;
+            maxim,fan-target-rpm = <1200>;
+        };
+    };

-- 
2.40.1