All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>,
	Arun R Murthy <arun.r.murthy@intel.com>,
	Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Subject: [PATCH v18 8/9] drm/i915/display: Compute vrr_vsync params
Date: Fri, 22 Mar 2024 08:41:56 +0530	[thread overview]
Message-ID: <20240322031157.3823909-9-mitulkumar.ajitkumar.golani@intel.com> (raw)
In-Reply-To: <20240322031157.3823909-1-mitulkumar.ajitkumar.golani@intel.com>

Compute vrr_vsync_start/end, which sets the position
for hardware to send the Vsync at a fixed position
relative to the end of the Vblank.

--v2:
- Updated VSYNC_START/END macros to VRR_VSYNC_START/END. (Ankit)
- Updated bit fields of VRR_VSYNC_START/END. (Ankit)

--v3:
- Add PIPE_CONF_CHECK_I(vrr.vsync_start/end).
- Read/write vrr_vsync params only when we intend to send
adaptive_sync sdp.

--v4:
- Use VRR_SYNC_START/END macros correctly.

--v5:
- Send AS SDP only when VRR is enabled.

--v6:
- Add TRANS_VRR_VSYNC befor enabling VRR as per bspec. (Ankit)

Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
---
 drivers/gpu/drm/i915/display/intel_display.c  |  2 ++
 .../drm/i915/display/intel_display_types.h    |  1 +
 drivers/gpu/drm/i915/display/intel_vrr.c      | 33 +++++++++++++++++--
 drivers/gpu/drm/i915/i915_reg.h               |  7 ++++
 4 files changed, 41 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index da3e840a3b70..9c8ed9ce4bb6 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -5396,6 +5396,8 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,
 		PIPE_CONF_CHECK_I(vrr.flipline);
 		PIPE_CONF_CHECK_I(vrr.pipeline_full);
 		PIPE_CONF_CHECK_I(vrr.guardband);
+		PIPE_CONF_CHECK_I(vrr.vsync_start);
+		PIPE_CONF_CHECK_I(vrr.vsync_end);
 	}
 
 #undef PIPE_CONF_CHECK_X
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index c00f6c3548b9..3c154d2a38e8 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -1431,6 +1431,7 @@ struct intel_crtc_state {
 		bool enable, in_range;
 		u8 pipeline_full;
 		u16 flipline, vmin, vmax, guardband;
+		u32 vsync_end, vsync_start;
 	} vrr;
 
 	/* Stream Splitter for eDP MSO */
diff --git a/drivers/gpu/drm/i915/display/intel_vrr.c b/drivers/gpu/drm/i915/display/intel_vrr.c
index eb5bd0743902..856378f8b90e 100644
--- a/drivers/gpu/drm/i915/display/intel_vrr.c
+++ b/drivers/gpu/drm/i915/display/intel_vrr.c
@@ -9,6 +9,7 @@
 #include "intel_de.h"
 #include "intel_display_types.h"
 #include "intel_vrr.h"
+#include "intel_dp.h"
 
 bool intel_vrr_is_capable(struct intel_connector *connector)
 {
@@ -113,6 +114,7 @@ intel_vrr_compute_config(struct intel_crtc_state *crtc_state,
 	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
 	struct intel_connector *connector =
 		to_intel_connector(conn_state->connector);
+	struct intel_dp *intel_dp = intel_attached_dp(connector);
 	struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode;
 	const struct drm_display_info *info = &connector->base.display_info;
 	int vmin, vmax;
@@ -165,6 +167,14 @@ intel_vrr_compute_config(struct intel_crtc_state *crtc_state,
 	if (crtc_state->uapi.vrr_enabled) {
 		crtc_state->vrr.enable = true;
 		crtc_state->mode_flags |= I915_MODE_FLAG_VRR;
+		if (intel_dp_as_sdp_supported(intel_dp)) {
+			crtc_state->vrr.vsync_start =
+				(crtc_state->hw.adjusted_mode.crtc_vtotal -
+					crtc_state->hw.adjusted_mode.vsync_start);
+			crtc_state->vrr.vsync_end =
+				(crtc_state->hw.adjusted_mode.crtc_vtotal -
+					crtc_state->hw.adjusted_mode.vsync_end);
+		}
 	}
 }
 
@@ -240,6 +250,12 @@ void intel_vrr_enable(const struct intel_crtc_state *crtc_state)
 		return;
 
 	intel_de_write(dev_priv, TRANS_PUSH(cpu_transcoder), TRANS_PUSH_EN);
+
+	if (HAS_AS_SDP(dev_priv))
+		intel_de_write(dev_priv, TRANS_VRR_VSYNC(cpu_transcoder),
+			       VRR_VSYNC_END(crtc_state->vrr.vsync_end) |
+			       VRR_VSYNC_START(crtc_state->vrr.vsync_start));
+
 	intel_de_write(dev_priv, TRANS_VRR_CTL(cpu_transcoder),
 		       VRR_CTL_VRR_ENABLE | trans_vrr_ctl(crtc_state));
 }
@@ -258,13 +274,16 @@ void intel_vrr_disable(const struct intel_crtc_state *old_crtc_state)
 	intel_de_wait_for_clear(dev_priv, TRANS_VRR_STATUS(cpu_transcoder),
 				VRR_STATUS_VRR_EN_LIVE, 1000);
 	intel_de_write(dev_priv, TRANS_PUSH(cpu_transcoder), 0);
+
+	if (HAS_AS_SDP(dev_priv))
+		intel_de_write(dev_priv, TRANS_VRR_VSYNC(cpu_transcoder), 0);
 }
 
 void intel_vrr_get_config(struct intel_crtc_state *crtc_state)
 {
 	struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
 	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
-	u32 trans_vrr_ctl;
+	u32 trans_vrr_ctl, trans_vrr_vsync;
 
 	trans_vrr_ctl = intel_de_read(dev_priv, TRANS_VRR_CTL(cpu_transcoder));
 
@@ -284,6 +303,16 @@ void intel_vrr_get_config(struct intel_crtc_state *crtc_state)
 		crtc_state->vrr.vmin = intel_de_read(dev_priv, TRANS_VRR_VMIN(cpu_transcoder)) + 1;
 	}
 
-	if (crtc_state->vrr.enable)
+	if (crtc_state->vrr.enable) {
 		crtc_state->mode_flags |= I915_MODE_FLAG_VRR;
+
+		if (HAS_AS_SDP(dev_priv)) {
+			trans_vrr_vsync =
+				intel_de_read(dev_priv, TRANS_VRR_VSYNC(cpu_transcoder));
+			crtc_state->vrr.vsync_start =
+				REG_FIELD_GET(VRR_VSYNC_START_MASK, trans_vrr_vsync);
+			crtc_state->vrr.vsync_end =
+				REG_FIELD_GET(VRR_VSYNC_END_MASK, trans_vrr_vsync);
+		}
+	}
 }
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 3ff6a38826cb..2ede6982175c 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2095,6 +2095,13 @@
 #define   TRANS_PUSH_EN			REG_BIT(31)
 #define   TRANS_PUSH_SEND		REG_BIT(30)
 
+#define _TRANS_VRR_VSYNC_A		0x60078
+#define TRANS_VRR_VSYNC(trans)		_MMIO_TRANS2(trans, _TRANS_VRR_VSYNC_A)
+#define VRR_VSYNC_END_MASK		REG_GENMASK(28, 16)
+#define VRR_VSYNC_END(vsync_end)	REG_FIELD_PREP(VRR_VSYNC_END_MASK, (vsync_end))
+#define VRR_VSYNC_START_MASK		REG_GENMASK(12, 0)
+#define VRR_VSYNC_START(vsync_start)	REG_FIELD_PREP(VRR_VSYNC_START_MASK, (vsync_start))
+
 /* VGA port control */
 #define ADPA			_MMIO(0x61100)
 #define PCH_ADPA                _MMIO(0xe1100)
-- 
2.25.1


  parent reply	other threads:[~2024-03-22  3:18 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-22  3:11 [PATCH v18 0/9] Enable Adaptive Sync SDP Support for DP Mitul Golani
2024-03-22  3:11 ` [PATCH v18 1/9] drm/dp: Add support to indicate if sink supports AS SDP Mitul Golani
2024-03-22  3:11 ` [PATCH v18 2/9] drm: Add Adaptive Sync SDP logging Mitul Golani
2024-03-22  3:11 ` [PATCH v18 3/9] drm/i915/display: Add crtc state dump for Adaptive Sync SDP Mitul Golani
2024-03-22  3:11 ` [PATCH v18 4/9] drm/i915/dp: Add Read/Write support " Mitul Golani
2024-03-22  3:11 ` [PATCH v18 5/9] drm/i915/dp: Add wrapper function to check AS SDP Mitul Golani
2024-03-22  3:11 ` [PATCH v18 6/9] drm/i915/display: Compute AS SDP parameters Mitul Golani
2024-03-22  3:11 ` [PATCH v18 7/9] drm/i915/display: Add state checker for Adaptive Sync SDP Mitul Golani
2024-03-22  3:11 ` Mitul Golani [this message]
2024-03-22  3:11 ` [PATCH v18 9/9] drm/i915/display: Read/Write " Mitul Golani
2024-03-22  4:27 ` ✗ Fi.CI.CHECKPATCH: warning for Enable Adaptive Sync SDP Support for DP (rev31) Patchwork
2024-03-22  4:27 ` ✗ Fi.CI.SPARSE: " Patchwork
2024-03-22  4:41 ` ✓ Fi.CI.BAT: success " Patchwork
2024-03-22 19:21 ` ✗ Fi.CI.IGT: failure " Patchwork
  -- strict thread matches above, loose matches on Subject: below --
2024-03-11  9:42 [PATCH v17 8/9] drm/i915/display: Compute vrr_vsync params Mitul Golani
2024-03-13  3:56 ` [PATCH v18 " Mitul Golani
2024-03-14  9:04   ` Nautiyal, Ankit K
2024-03-11  9:42 [PATCH v17 1/9] drm/dp: Add support to indicate if sink supports AS SDP Mitul Golani
2024-03-21 15:38 ` [PATCH v18 8/9] drm/i915/display: Compute vrr_vsync params Mitul Golani

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240322031157.3823909-9-mitulkumar.ajitkumar.golani@intel.com \
    --to=mitulkumar.ajitkumar.golani@intel.com \
    --cc=ankit.k.nautiyal@intel.com \
    --cc=arun.r.murthy@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.