[PATCH v4 2/2] drm/msm/dp: Add support for the X1E80100

[Abel Vesa <abel.vesa@linaro.org>]

Add the X1E80100 DP descs and compatible. This platform will be using
a single compatible for both eDP and DP mode. The actual mode will
be set based on the presence of the panel node in DT.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 drivers/gpu/drm/msm/dp/dp_display.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 9169a739cc54..521cba76d2a0 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -171,6 +171,14 @@ static const struct msm_dp_desc sm8650_dp_descs[] = {
 	{}
 };
 
+static const struct msm_dp_desc x1e80100_dp_descs[] = {
+	{ .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .wide_bus_supported = true },
+	{ .io_start = 0x0ae98000, .id = MSM_DP_CONTROLLER_1, .wide_bus_supported = true },
+	{ .io_start = 0x0ae9a000, .id = MSM_DP_CONTROLLER_2, .wide_bus_supported = true },
+	{ .io_start = 0x0aea0000, .id = MSM_DP_CONTROLLER_3, .wide_bus_supported = true },
+	{}
+};
+
 static const struct of_device_id dp_dt_match[] = {
 	{ .compatible = "qcom,sc7180-dp", .data = &sc7180_dp_descs },
 	{ .compatible = "qcom,sc7280-dp", .data = &sc7280_dp_descs },
@@ -182,6 +190,7 @@ static const struct of_device_id dp_dt_match[] = {
 	{ .compatible = "qcom,sdm845-dp", .data = &sc7180_dp_descs },
 	{ .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_descs },
 	{ .compatible = "qcom,sm8650-dp", .data = &sm8650_dp_descs },
+	{ .compatible = "qcom,x1e80100-dp", .data = &x1e80100_dp_descs },
 	{}
 };
 

-- 
2.34.1