From: Chris Morgan <macroalpha82@gmail.com> To: linux-rockchip@lists.infradead.org Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org, daniel@ffwll.ch, airlied@gmail.com, sam@ravnborg.org, quic_jesszhan@quicinc.com, neil.armstrong@linaro.org, megi@xff.cz, kernel@puri.sm, agx@sigxcpu.org, heiko@sntech.de, conor+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, robh@kernel.org, Chris Morgan <macromorgan@hotmail.com> Subject: [PATCH 5/5] arm64: dts: rockchip: Add GameForce Chi Date: Mon, 25 Mar 2024 08:49:59 -0500 [thread overview] Message-ID: <20240325134959.11807-6-macroalpha82@gmail.com> (raw) In-Reply-To: <20240325134959.11807-1-macroalpha82@gmail.com> From: Chris Morgan <macromorgan@hotmail.com> Add support for the GameForce Chi, which is a handheld gaming console from GameForce with a Rockchip RK3326 SoC. The device has a 640x480 3.5" dual-lane DSI display, one analog joystick connected to the SoC SARADC controller and a second analog joystick connected to an unknown UART based ADC, a single SD card slot, a single USB-C port for charging, and onboard RTL8723BS WiFi/Bluetooth combo, multiple face buttons, and an array of R/G/B LEDs used for key backlighting. The vendor was unable to provide details on the unknown UART based ADC which I have documented via a comment in the device-tree, and the vendor also does not have available Bluetooth firmware (the BT was not previously working on the vendor's OS, this has also been noted in a device-tree comment). Aside from the right analog ADC joystick and bluetooth all hardware has been tested and is working as expected. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../dts/rockchip/rk3326-gameforce-chi.dts | 811 ++++++++++++++++++ 2 files changed, 812 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-gameforce-chi.dts diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index f906a868b71a..584ee35da180 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351m.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351v.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-gameforce-chi.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3326-gameforce-chi.dts b/arch/arm64/boot/dts/rockchip/rk3326-gameforce-chi.dts new file mode 100644 index 000000000000..f7a9e763fba0 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3326-gameforce-chi.dts @@ -0,0 +1,811 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 Chris Morgan <macromorgan@hotmail.com> + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3326.dtsi" + +/ { + model = "GameForce Chi"; + + compatible = "gameforce,chi", "rockchip,rk3326"; + + chassis-type = "handset"; + + aliases { + mmc0 = &sdmmc; + mmc1 = &sdio; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + adc_joystick: adc-joystick { + compatible = "adc-joystick"; + io-channels = <&saradc 0>, + <&saradc 1>; + poll-interval = <100>; + #address-cells = <1>; + #size-cells = <0>; + + axis@0 { + reg = <0>; + abs-flat = <10>; + abs-fuzz = <10>; + abs-range = <850 175>; + linux,code = <ABS_Y>; + }; + + axis@1 { + reg = <1>; + abs-flat = <10>; + abs-fuzz = <10>; + abs-range = <800 190>; + linux,code = <ABS_X>; + }; + }; + + adc_keys: adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 2>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <60>; + + button-1 { + label = "HAPPY1"; + linux,code = <BTN_TRIGGER_HAPPY1>; + press-threshold-microvolt = <15000>; + }; + + button-2 { + label = "HAPPY2"; + linux,code = <BTN_TRIGGER_HAPPY2>; + press-threshold-microvolt = <300000>; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&vcc_bl>; + pwms = <&pwm1 0 25000 0>; + }; + + battery: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <3000000>; + charge-term-current-microamp = <300000>; + constant-charge-current-max-microamp = <1500000>; + constant-charge-voltage-max-microvolt = <4200000>; + factory-internal-resistance-micro-ohms = <180000>; + voltage-max-design-microvolt = <4250000>; + voltage-min-design-microvolt = <3400000>; + + ocv-capacity-celsius = <20>; + ocv-capacity-table-0 = <4106000 100>, <4071000 95>, <4018000 90>, <3975000 85>, + <3946000 80>, <3908000 75>, <3877000 70>, <3853000 65>, + <3834000 60>, <3816000 55>, <3802000 50>, <3788000 45>, + <3774000 40>, <3760000 35>, <3748000 30>, <3735000 25>, + <3718000 20>, <3697000 15>, <3685000 10>, <3625000 5>, + <3400000 0>; + }; + + gpio_leds: gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + red_led: led-0 { + color = <LED_COLOR_ID_RED>; + gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; + }; + + green_led: led-1 { + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>; + }; + + blue_led: led-2 { + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; + }; + + white_led: led-3 { + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>; + }; + + chg_led: led-4 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_CHARGING; + gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>; + }; + + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&btn_pins_ctrl>; + pinctrl-names = "default"; + + button-a { + gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_LOW>; + label = "EAST"; + linux,code = <BTN_EAST>; + }; + + button-b { + gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; + label = "SOUTH"; + linux,code = <BTN_SOUTH>; + }; + + button-down { + gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>; + label = "DPAD-DOWN"; + linux,code = <BTN_DPAD_DOWN>; + }; + + button-home { + gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>; + label = "HOME"; + linux,code = <BTN_MODE>; + }; + + button-l1 { + gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>; + label = "TL"; + linux,code = <BTN_TL>; + }; + + button-l2 { + gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>; + label = "TL2"; + linux,code = <BTN_TL2>; + }; + + button-left { + gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>; + label = "DPAD-LEFT"; + linux,code = <BTN_DPAD_LEFT>; + }; + + button-r1 { + gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>; + label = "TR"; + linux,code = <BTN_TR>; + }; + + button-r2 { + gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>; + label = "TR2"; + linux,code = <BTN_TR2>; + }; + + button-right { + gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>; + label = "DPAD-RIGHT"; + linux,code = <BTN_DPAD_RIGHT>; + }; + + button-select { + gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>; + label = "SELECT"; + linux,code = <BTN_SELECT>; + }; + + button-start { + gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>; + label = "START"; + linux,code = <BTN_START>; + }; + + button-up { + gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>; + label = "DPAD-UP"; + linux,code = <BTN_DPAD_UP>; + }; + + button-x { + gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>; + label = "NORTH"; + linux,code = <BTN_NORTH>; + }; + + button-y { + gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>; + label = "WEST"; + linux,code = <BTN_WEST>; + }; + }; + + multi-led { + compatible = "leds-group-multicolor"; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_KBD_BACKLIGHT; + leds = <&red_led>, <&green_led>, <&blue_led>; + }; + + sound { + compatible = "simple-audio-card"; + pinctrl-0 = <&hp_det>; + pinctrl-names = "default"; + simple-audio-card,name = "rk817_ext"; + simple-audio-card,aux-devs = <&spk_amp>; + simple-audio-card,format = "i2s"; + simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphones", + "Speaker", "Internal Speakers"; + simple-audio-card,routing = + "MICL", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR", + "Internal Speakers", "Speaker Amp OUTL", + "Internal Speakers", "Speaker Amp OUTR", + "Speaker Amp INL", "HPOL", + "Speaker Amp INR", "HPOR"; + simple-audio-card,pin-switches = "Internal Speakers"; + + simple-audio-card,codec { + sound-dai = <&rk817>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s1_2ch>; + }; + }; + + spk_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&spk_amp_enable_h>; + pinctrl-names = "default"; + sound-name-prefix = "Speaker Amp"; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk817 1>; + clock-names = "ext_clock"; + pinctrl-0 = <&wifi_enable_h>; + pinctrl-names = "default"; + post-power-on-delay-ms = <200>; + reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; + }; + + vccsys: vccsys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v8_sys"; + regulator-always-on; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + }; + + vibrator_left: pwm-vibrator-l { + compatible = "pwm-vibrator"; + pwm-names = "enable"; + pwms = <&pwm4 0 25000 0>; + }; + + vibrator_right: pwm-vibrator-r { + compatible = "pwm-vibrator"; + pwm-names = "enable"; + pwms = <&pwm5 0 25000 0>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&display_subsystem { + status = "okay"; +}; + +&dsi { + status = "okay"; + + ports { + mipi_out: port@1 { + reg = <1>; + + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; + + internal_display: panel@0 { + reg = <0>; + compatible = "gameforce,chi-panel"; + backlight = <&backlight>; + iovcc-supply = <&vcc_lcd>; + vcc-supply = <&vcc_lcd>; + reset-gpios = <&gpio3 RK_PA0 GPIO_ACTIVE_LOW>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; + +&dsi_dphy { + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_logic>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-falling-time-ns = <16>; + i2c-scl-rising-time-ns = <280>; + status = "okay"; + + rk817: pmic@20 { + compatible = "rockchip,rk817"; + reg = <0x20>; + #clock-cells = <1>; + clock-names = "mclk"; + clock-output-names = "rk808-clkout1", "xin32k"; + clocks = <&cru SCLK_I2S1_OUT>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PC1 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>; + pinctrl-names = "default"; + #sound-dai-cells = <0>; + system-power-controller; + wakeup-source; + + vcc1-supply = <&vccsys>; + vcc2-supply = <&vccsys>; + vcc3-supply = <&vccsys>; + vcc4-supply = <&vccsys>; + vcc5-supply = <&vccsys>; + vcc6-supply = <&vccsys>; + vcc7-supply = <&vcc_3v0>; + vcc8-supply = <&vccsys>; + vcc9-supply = <&dcdc_boost>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1150000>; + regulator-min-microvolt = <950000>; + regulator-name = "vdd_logic"; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1350000>; + regulator-min-microvolt = <950000>; + regulator-name = "vdd_arm"; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v0: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <3000000>; + regulator-name = "vcc_3v0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc_1v8: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <1000000>; + regulator-name = "vdd_1v0"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_3v0_pmu: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <3000000>; + regulator-name = "vcc_3v0_pmu"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vccio_sd"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_sd: LDO_REG6 { + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_sd"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_bl: LDO_REG7 { + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_bl"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_lcd: LDO_REG8 { + regulator-max-microvolt = <2800000>; + regulator-min-microvolt = <2800000>; + regulator-name = "vcc_lcd"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <2800000>; + }; + }; + + vcc_wifi: LDO_REG9 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_wifi"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + dcdc_boost: BOOST { + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "dcdc_boost"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + otg_switch: OTG_SWITCH { + regulator-name = "otg_switch"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + + rk817_charger: charger { + monitored-battery = <&battery>; + rockchip,resistor-sense-micro-ohms = <10000>; + rockchip,sleep-enter-current-microamp = <300000>; + rockchip,sleep-filter-current-microamp = <100000>; + }; + }; +}; + +&i2s1_2ch { + status = "okay"; +}; + +&io_domains { + vccio1-supply = <&vcc_3v0_pmu>; + vccio2-supply = <&vccio_sd>; + vccio3-supply = <&vcc_3v0>; + vccio4-supply = <&vcc_3v0>; + vccio5-supply = <&vcc_3v0>; + vccio6-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pinctrl { + bluetooth-pins { + bt_reset: bt-reset { + rockchip,pins = + <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + bt_wake_dev: bt-wake-dev { + rockchip,pins = + <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_host: bt-wake-host { + rockchip,pins = + <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + headphone { + hp_det: hp-det { + rockchip,pins = + <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gpio-btns { + btn_pins_ctrl: btn-pins-ctrl { + rockchip,pins = + <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gpio-leds { + led_pins: led-pins { + rockchip,pins = + <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>, + <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>, + <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>, + <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>, + <3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic-int { + rockchip,pins = + <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + soc_slppin_gpio: soc_slppin_gpio { + rockchip,pins = + <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>; + }; + + soc_slppin_rst: soc_slppin_rst { + rockchip,pins = + <0 RK_PA4 2 &pcfg_pull_none>; + }; + + soc_slppin_slp: soc_slppin_slp { + rockchip,pins = + <0 RK_PA4 1 &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = + <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + speaker { + spk_amp_enable_h: spk-amp-enable-h { + rockchip,pins = + <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc_1v8>; + pmuio2-supply = <&vcc_3v0_pmu>; + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +&pwm5 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdio { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + disable-wp; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + no-mmc; + no-sd; + non-removable; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdmmc { + cap-mmc-highspeed; + cap-sd-highspeed; + no-sdio; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sfc { + #address-cells = <1>; + pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>; + pinctrl-names = "default"; + #size-cells = <0>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <108000000>; + spi-rx-bus-width = <2>; + spi-tx-bus-width = <1>; + }; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy { + status = "okay"; + + u2phy_otg: otg-port { + status = "okay"; + }; +}; + +&usb20_otg { + status = "okay"; +}; + +/* + * The right ADC joystick exists connected to an unknown ADC + * controller which can be communicated with via uart0. This ADC device + * is an 8-pin SOIC with no markings located right next to the left ADC + * joystick ribbon cable. The pinout for this ADC controller appears to + * be pin 1 - VCC (2.8v), pin 2 - 1.8v (clk maybe?), pin 3 - GPIO 10, + * pin 4 - unknown, pin 5 - unknown, pin 6 - analog in, pin 7 - analog in, + * pin 8 - ground. There is currently a userspace UART driver for this + * device but it only works with the BSP joystick driver. + */ +&uart0 { + status = "okay"; +}; + +/* Bluetooth was not working on BSP and is not currently working on + * mainline due to missing firmware. Bluetooth requires removal of DMA + * or else it will not probe. + */ +&uart1 { + /delete-property/ dma-names; + /delete-property/ dmas; + uart-has-rtscts; + status = "okay"; + + bluetooth: bluetooth { + compatible = "realtek,rtl8723ds-bt"; + device-wake-gpios = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&bt_reset>, <&bt_wake_dev>, <&bt_wake_host>; + pinctrl-names = "default"; + }; +}; + +&uart2 { + pinctrl-0 = <&uart2m1_xfer>; + pinctrl-names = "default"; + status = "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Chris Morgan <macroalpha82@gmail.com> To: linux-rockchip@lists.infradead.org Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org, daniel@ffwll.ch, airlied@gmail.com, sam@ravnborg.org, quic_jesszhan@quicinc.com, neil.armstrong@linaro.org, megi@xff.cz, kernel@puri.sm, agx@sigxcpu.org, heiko@sntech.de, conor+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, robh@kernel.org, Chris Morgan <macromorgan@hotmail.com> Subject: [PATCH 5/5] arm64: dts: rockchip: Add GameForce Chi Date: Mon, 25 Mar 2024 08:49:59 -0500 [thread overview] Message-ID: <20240325134959.11807-6-macroalpha82@gmail.com> (raw) In-Reply-To: <20240325134959.11807-1-macroalpha82@gmail.com> From: Chris Morgan <macromorgan@hotmail.com> Add support for the GameForce Chi, which is a handheld gaming console from GameForce with a Rockchip RK3326 SoC. The device has a 640x480 3.5" dual-lane DSI display, one analog joystick connected to the SoC SARADC controller and a second analog joystick connected to an unknown UART based ADC, a single SD card slot, a single USB-C port for charging, and onboard RTL8723BS WiFi/Bluetooth combo, multiple face buttons, and an array of R/G/B LEDs used for key backlighting. The vendor was unable to provide details on the unknown UART based ADC which I have documented via a comment in the device-tree, and the vendor also does not have available Bluetooth firmware (the BT was not previously working on the vendor's OS, this has also been noted in a device-tree comment). Aside from the right analog ADC joystick and bluetooth all hardware has been tested and is working as expected. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../dts/rockchip/rk3326-gameforce-chi.dts | 811 ++++++++++++++++++ 2 files changed, 812 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-gameforce-chi.dts diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index f906a868b71a..584ee35da180 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351m.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351v.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-gameforce-chi.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3326-gameforce-chi.dts b/arch/arm64/boot/dts/rockchip/rk3326-gameforce-chi.dts new file mode 100644 index 000000000000..f7a9e763fba0 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3326-gameforce-chi.dts @@ -0,0 +1,811 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 Chris Morgan <macromorgan@hotmail.com> + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3326.dtsi" + +/ { + model = "GameForce Chi"; + + compatible = "gameforce,chi", "rockchip,rk3326"; + + chassis-type = "handset"; + + aliases { + mmc0 = &sdmmc; + mmc1 = &sdio; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + adc_joystick: adc-joystick { + compatible = "adc-joystick"; + io-channels = <&saradc 0>, + <&saradc 1>; + poll-interval = <100>; + #address-cells = <1>; + #size-cells = <0>; + + axis@0 { + reg = <0>; + abs-flat = <10>; + abs-fuzz = <10>; + abs-range = <850 175>; + linux,code = <ABS_Y>; + }; + + axis@1 { + reg = <1>; + abs-flat = <10>; + abs-fuzz = <10>; + abs-range = <800 190>; + linux,code = <ABS_X>; + }; + }; + + adc_keys: adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 2>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <60>; + + button-1 { + label = "HAPPY1"; + linux,code = <BTN_TRIGGER_HAPPY1>; + press-threshold-microvolt = <15000>; + }; + + button-2 { + label = "HAPPY2"; + linux,code = <BTN_TRIGGER_HAPPY2>; + press-threshold-microvolt = <300000>; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&vcc_bl>; + pwms = <&pwm1 0 25000 0>; + }; + + battery: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <3000000>; + charge-term-current-microamp = <300000>; + constant-charge-current-max-microamp = <1500000>; + constant-charge-voltage-max-microvolt = <4200000>; + factory-internal-resistance-micro-ohms = <180000>; + voltage-max-design-microvolt = <4250000>; + voltage-min-design-microvolt = <3400000>; + + ocv-capacity-celsius = <20>; + ocv-capacity-table-0 = <4106000 100>, <4071000 95>, <4018000 90>, <3975000 85>, + <3946000 80>, <3908000 75>, <3877000 70>, <3853000 65>, + <3834000 60>, <3816000 55>, <3802000 50>, <3788000 45>, + <3774000 40>, <3760000 35>, <3748000 30>, <3735000 25>, + <3718000 20>, <3697000 15>, <3685000 10>, <3625000 5>, + <3400000 0>; + }; + + gpio_leds: gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + red_led: led-0 { + color = <LED_COLOR_ID_RED>; + gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; + }; + + green_led: led-1 { + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>; + }; + + blue_led: led-2 { + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; + }; + + white_led: led-3 { + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>; + }; + + chg_led: led-4 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_CHARGING; + gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>; + }; + + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&btn_pins_ctrl>; + pinctrl-names = "default"; + + button-a { + gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_LOW>; + label = "EAST"; + linux,code = <BTN_EAST>; + }; + + button-b { + gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; + label = "SOUTH"; + linux,code = <BTN_SOUTH>; + }; + + button-down { + gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>; + label = "DPAD-DOWN"; + linux,code = <BTN_DPAD_DOWN>; + }; + + button-home { + gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>; + label = "HOME"; + linux,code = <BTN_MODE>; + }; + + button-l1 { + gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>; + label = "TL"; + linux,code = <BTN_TL>; + }; + + button-l2 { + gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>; + label = "TL2"; + linux,code = <BTN_TL2>; + }; + + button-left { + gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>; + label = "DPAD-LEFT"; + linux,code = <BTN_DPAD_LEFT>; + }; + + button-r1 { + gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>; + label = "TR"; + linux,code = <BTN_TR>; + }; + + button-r2 { + gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>; + label = "TR2"; + linux,code = <BTN_TR2>; + }; + + button-right { + gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>; + label = "DPAD-RIGHT"; + linux,code = <BTN_DPAD_RIGHT>; + }; + + button-select { + gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>; + label = "SELECT"; + linux,code = <BTN_SELECT>; + }; + + button-start { + gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>; + label = "START"; + linux,code = <BTN_START>; + }; + + button-up { + gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>; + label = "DPAD-UP"; + linux,code = <BTN_DPAD_UP>; + }; + + button-x { + gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>; + label = "NORTH"; + linux,code = <BTN_NORTH>; + }; + + button-y { + gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>; + label = "WEST"; + linux,code = <BTN_WEST>; + }; + }; + + multi-led { + compatible = "leds-group-multicolor"; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_KBD_BACKLIGHT; + leds = <&red_led>, <&green_led>, <&blue_led>; + }; + + sound { + compatible = "simple-audio-card"; + pinctrl-0 = <&hp_det>; + pinctrl-names = "default"; + simple-audio-card,name = "rk817_ext"; + simple-audio-card,aux-devs = <&spk_amp>; + simple-audio-card,format = "i2s"; + simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphones", + "Speaker", "Internal Speakers"; + simple-audio-card,routing = + "MICL", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR", + "Internal Speakers", "Speaker Amp OUTL", + "Internal Speakers", "Speaker Amp OUTR", + "Speaker Amp INL", "HPOL", + "Speaker Amp INR", "HPOR"; + simple-audio-card,pin-switches = "Internal Speakers"; + + simple-audio-card,codec { + sound-dai = <&rk817>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s1_2ch>; + }; + }; + + spk_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&spk_amp_enable_h>; + pinctrl-names = "default"; + sound-name-prefix = "Speaker Amp"; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk817 1>; + clock-names = "ext_clock"; + pinctrl-0 = <&wifi_enable_h>; + pinctrl-names = "default"; + post-power-on-delay-ms = <200>; + reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; + }; + + vccsys: vccsys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v8_sys"; + regulator-always-on; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + }; + + vibrator_left: pwm-vibrator-l { + compatible = "pwm-vibrator"; + pwm-names = "enable"; + pwms = <&pwm4 0 25000 0>; + }; + + vibrator_right: pwm-vibrator-r { + compatible = "pwm-vibrator"; + pwm-names = "enable"; + pwms = <&pwm5 0 25000 0>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&display_subsystem { + status = "okay"; +}; + +&dsi { + status = "okay"; + + ports { + mipi_out: port@1 { + reg = <1>; + + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; + + internal_display: panel@0 { + reg = <0>; + compatible = "gameforce,chi-panel"; + backlight = <&backlight>; + iovcc-supply = <&vcc_lcd>; + vcc-supply = <&vcc_lcd>; + reset-gpios = <&gpio3 RK_PA0 GPIO_ACTIVE_LOW>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; + +&dsi_dphy { + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_logic>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-falling-time-ns = <16>; + i2c-scl-rising-time-ns = <280>; + status = "okay"; + + rk817: pmic@20 { + compatible = "rockchip,rk817"; + reg = <0x20>; + #clock-cells = <1>; + clock-names = "mclk"; + clock-output-names = "rk808-clkout1", "xin32k"; + clocks = <&cru SCLK_I2S1_OUT>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PC1 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>; + pinctrl-names = "default"; + #sound-dai-cells = <0>; + system-power-controller; + wakeup-source; + + vcc1-supply = <&vccsys>; + vcc2-supply = <&vccsys>; + vcc3-supply = <&vccsys>; + vcc4-supply = <&vccsys>; + vcc5-supply = <&vccsys>; + vcc6-supply = <&vccsys>; + vcc7-supply = <&vcc_3v0>; + vcc8-supply = <&vccsys>; + vcc9-supply = <&dcdc_boost>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1150000>; + regulator-min-microvolt = <950000>; + regulator-name = "vdd_logic"; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1350000>; + regulator-min-microvolt = <950000>; + regulator-name = "vdd_arm"; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v0: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <3000000>; + regulator-name = "vcc_3v0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc_1v8: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <1000000>; + regulator-name = "vdd_1v0"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_3v0_pmu: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <3000000>; + regulator-name = "vcc_3v0_pmu"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vccio_sd"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_sd: LDO_REG6 { + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_sd"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_bl: LDO_REG7 { + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_bl"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_lcd: LDO_REG8 { + regulator-max-microvolt = <2800000>; + regulator-min-microvolt = <2800000>; + regulator-name = "vcc_lcd"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <2800000>; + }; + }; + + vcc_wifi: LDO_REG9 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_wifi"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + dcdc_boost: BOOST { + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "dcdc_boost"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + otg_switch: OTG_SWITCH { + regulator-name = "otg_switch"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + + rk817_charger: charger { + monitored-battery = <&battery>; + rockchip,resistor-sense-micro-ohms = <10000>; + rockchip,sleep-enter-current-microamp = <300000>; + rockchip,sleep-filter-current-microamp = <100000>; + }; + }; +}; + +&i2s1_2ch { + status = "okay"; +}; + +&io_domains { + vccio1-supply = <&vcc_3v0_pmu>; + vccio2-supply = <&vccio_sd>; + vccio3-supply = <&vcc_3v0>; + vccio4-supply = <&vcc_3v0>; + vccio5-supply = <&vcc_3v0>; + vccio6-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pinctrl { + bluetooth-pins { + bt_reset: bt-reset { + rockchip,pins = + <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + bt_wake_dev: bt-wake-dev { + rockchip,pins = + <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_host: bt-wake-host { + rockchip,pins = + <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + headphone { + hp_det: hp-det { + rockchip,pins = + <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gpio-btns { + btn_pins_ctrl: btn-pins-ctrl { + rockchip,pins = + <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gpio-leds { + led_pins: led-pins { + rockchip,pins = + <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>, + <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>, + <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>, + <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>, + <3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic-int { + rockchip,pins = + <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + soc_slppin_gpio: soc_slppin_gpio { + rockchip,pins = + <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>; + }; + + soc_slppin_rst: soc_slppin_rst { + rockchip,pins = + <0 RK_PA4 2 &pcfg_pull_none>; + }; + + soc_slppin_slp: soc_slppin_slp { + rockchip,pins = + <0 RK_PA4 1 &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = + <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + speaker { + spk_amp_enable_h: spk-amp-enable-h { + rockchip,pins = + <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc_1v8>; + pmuio2-supply = <&vcc_3v0_pmu>; + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +&pwm5 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdio { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + disable-wp; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + no-mmc; + no-sd; + non-removable; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdmmc { + cap-mmc-highspeed; + cap-sd-highspeed; + no-sdio; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sfc { + #address-cells = <1>; + pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>; + pinctrl-names = "default"; + #size-cells = <0>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <108000000>; + spi-rx-bus-width = <2>; + spi-tx-bus-width = <1>; + }; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy { + status = "okay"; + + u2phy_otg: otg-port { + status = "okay"; + }; +}; + +&usb20_otg { + status = "okay"; +}; + +/* + * The right ADC joystick exists connected to an unknown ADC + * controller which can be communicated with via uart0. This ADC device + * is an 8-pin SOIC with no markings located right next to the left ADC + * joystick ribbon cable. The pinout for this ADC controller appears to + * be pin 1 - VCC (2.8v), pin 2 - 1.8v (clk maybe?), pin 3 - GPIO 10, + * pin 4 - unknown, pin 5 - unknown, pin 6 - analog in, pin 7 - analog in, + * pin 8 - ground. There is currently a userspace UART driver for this + * device but it only works with the BSP joystick driver. + */ +&uart0 { + status = "okay"; +}; + +/* Bluetooth was not working on BSP and is not currently working on + * mainline due to missing firmware. Bluetooth requires removal of DMA + * or else it will not probe. + */ +&uart1 { + /delete-property/ dma-names; + /delete-property/ dmas; + uart-has-rtscts; + status = "okay"; + + bluetooth: bluetooth { + compatible = "realtek,rtl8723ds-bt"; + device-wake-gpios = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&bt_reset>, <&bt_wake_dev>, <&bt_wake_host>; + pinctrl-names = "default"; + }; +}; + +&uart2 { + pinctrl-0 = <&uart2m1_xfer>; + pinctrl-names = "default"; + status = "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; -- 2.34.1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2024-03-25 13:50 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-03-25 13:49 [PATCH 0/5] Add Support for RK3326 GameForce Chi Chris Morgan 2024-03-25 13:49 ` Chris Morgan 2024-03-25 13:49 ` [PATCH 1/5] dt-bindings: vendor-prefix: Add prefix for GameForce Chris Morgan 2024-03-25 13:49 ` Chris Morgan 2024-03-26 20:30 ` Rob Herring 2024-03-26 20:30 ` Rob Herring 2024-03-25 13:49 ` [PATCH 2/5] dt-bindings: display: Add GameForce Chi Panel Chris Morgan 2024-03-25 13:49 ` Chris Morgan 2024-03-26 20:30 ` Rob Herring 2024-03-26 20:30 ` Rob Herring 2024-03-25 13:49 ` [PATCH 3/5] drm/panel: st7703: Add GameForce Chi Panel Support Chris Morgan 2024-03-25 13:49 ` Chris Morgan 2024-03-28 0:37 ` Jessica Zhang 2024-03-28 0:37 ` Jessica Zhang 2024-03-25 13:49 ` [PATCH 4/5] dt-bindings: arm: rockchip: Add GameForce Chi Chris Morgan 2024-03-25 13:49 ` Chris Morgan 2024-03-25 19:25 ` Conor Dooley 2024-03-25 19:25 ` Conor Dooley 2024-03-25 13:49 ` Chris Morgan [this message] 2024-03-25 13:49 ` [PATCH 5/5] arm64: dts: " Chris Morgan 2024-03-29 16:37 ` (subset) [PATCH 0/5] Add Support for RK3326 " Neil Armstrong 2024-03-29 16:37 ` Neil Armstrong 2024-04-11 18:29 ` Heiko Stuebner 2024-04-11 18:29 ` Heiko Stuebner
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240325134959.11807-6-macroalpha82@gmail.com \ --to=macroalpha82@gmail.com \ --cc=agx@sigxcpu.org \ --cc=airlied@gmail.com \ --cc=conor+dt@kernel.org \ --cc=daniel@ffwll.ch \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=heiko@sntech.de \ --cc=kernel@puri.sm \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=macromorgan@hotmail.com \ --cc=megi@xff.cz \ --cc=neil.armstrong@linaro.org \ --cc=quic_jesszhan@quicinc.com \ --cc=robh@kernel.org \ --cc=sam@ravnborg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.