All of lore.kernel.org
 help / color / mirror / Atom feed
From: Baojun Xu <baojun.xu@ti.com>
To: <tiwai@suse.de>
Cc: <robh+dt@kernel.org>, <andriy.shevchenko@linux.intel.com>,
	<lgirdwood@gmail.com>, <perex@perex.cz>,
	<pierre-louis.bossart@linux.intel.com>, <kevin-lu@ti.com>,
	<13916275206@139.com>, <alsa-devel@alsa-project.org>,
	<linux-kernel@vger.kernel.org>, <liam.r.girdwood@intel.com>,
	<yung-chuan.liao@linux.intel.com>, <baojun.xu@ti.com>,
	<broonie@kernel.org>, <soyer@irl.hu>
Subject: [PATCH v1 6/8] ALSA: hda/tas2781: Add tas2781 SPI-based driver
Date: Tue, 26 Mar 2024 09:09:03 +0800	[thread overview]
Message-ID: <20240326010905.2147-6-baojun.xu@ti.com> (raw)
In-Reply-To: <20240326010905.2147-1-baojun.xu@ti.com>

Add tas2781-spi.h for tas2781 spi driver.

Signed-off-by: Baojun Xu <baojun.xu@ti.com>
---
 sound/pci/hda/tas2781-spi.h | 180 ++++++++++++++++++++++++++++++++++++
 1 file changed, 180 insertions(+)
 create mode 100644 sound/pci/hda/tas2781-spi.h

diff --git a/sound/pci/hda/tas2781-spi.h b/sound/pci/hda/tas2781-spi.h
new file mode 100644
index 000000000..abd6bb9aa
--- /dev/null
+++ b/sound/pci/hda/tas2781-spi.h
@@ -0,0 +1,180 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+//
+// ALSA SoC Texas Instruments TAS2563/TAS2781 Audio Smart Amplifier
+//
+// Copyright (C) 2024 Texas Instruments Incorporated
+// https://www.ti.com
+//
+// The TAS2781 spi driver implements a flexible and configurable
+// algo coefficient setting for TAS2781 chips.
+//
+// Author: Baojun Xu <baojun.xu@ti.com>
+//
+
+#ifndef __TAS2781_SPI_H__
+#define __TAS2781_SPI_H__
+
+#include <sound/tas2781-dsp.h>
+
+/* version number */
+#define TAS2781_DRV_VER			1
+#define SMARTAMP_MODULE_NAME		"tas2781"
+#define TAS2781_GLOBAL_ADDR		0x40
+#define TAS2563_GLOBAL_ADDR		0x48
+#define TASDEVICE_RATES			(SNDRV_PCM_RATE_44100 |\
+	SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 |\
+	SNDRV_PCM_RATE_88200)
+
+#define TASDEVICE_FORMATS		(SNDRV_PCM_FMTBIT_S16_LE | \
+	SNDRV_PCM_FMTBIT_S24_LE | \
+	SNDRV_PCM_FMTBIT_S32_LE)
+
+/*PAGE Control Register (available in page0 of each book) */
+#define TASDEVICE_PAGE_SELECT		0x00
+#define TASDEVICE_BOOKCTL_PAGE		0x00
+#define TASDEVICE_BOOKCTL_REG		127
+#define TASDEVICE_BOOK_ID(reg)		(reg / (256 * 128))
+#define TASDEVICE_PAGE_ID(reg)		((reg % (256 * 128)) / 128)
+#define TASDEVICE_PAGE_REG(reg)		((reg % (256 * 128)) % 128)
+#define TASDEVICE_PGRG(reg)		(reg % (256 * 128))
+#define TASDEVICE_REG(book, page, reg)	(((book * 256 * 128) + \
+					(page * 128)) + reg)
+
+/*Software Reset */
+#define TAS2781_REG_SWRESET		TASDEVICE_REG(0x0, 0X0, 0x01)
+#define TAS2781_REG_SWRESET_RESET	BIT(0)
+
+/*I2C Checksum */
+#define TASDEVICE_I2CChecksum		TASDEVICE_REG(0x0, 0x0, 0x7E)
+
+/* Volume control */
+#define TAS2781_DVC_LVL			TASDEVICE_REG(0x0, 0x0, 0x1A)
+#define TAS2781_AMP_LEVEL		TASDEVICE_REG(0x0, 0x0, 0x03)
+#define TAS2781_AMP_LEVEL_MASK		GENMASK(5, 1)
+
+#define TASDEVICE_CMD_SING_W		0x1
+#define TASDEVICE_CMD_BURST		0x2
+#define TASDEVICE_CMD_DELAY		0x3
+#define TASDEVICE_CMD_FIELD_W		0x4
+
+#define TAS2781_SPI_MAX_FREQ		4000000
+
+enum audio_device {
+	TAS2781,
+};
+
+enum device_catlog_id {
+	HP = 0,
+	OTHERS
+};
+
+struct tasdevice {
+	struct tasdevice_fw *cali_data_fmw;
+	unsigned int dev_addr;
+	unsigned int err_code;
+	unsigned char cur_book;
+	short cur_prog;
+	short cur_conf;
+	bool is_loading;
+	bool is_loaderr;
+};
+
+struct tasdevice_irqinfo {
+	int irq_gpio;
+	int irq;
+};
+
+struct calidata {
+	unsigned char *data;
+	unsigned long total_sz;
+};
+
+struct tasdevice_priv {
+	struct tasdevice tasdevice;
+	struct tasdevice_irqinfo irq_info;
+	struct spi_device **spi_devs;
+	struct tasdevice_rca rcabin;
+	struct calidata cali_data;
+	struct tasdevice_fw *fmw;
+	struct gpio_desc *reset;
+	struct gpio_desc *chipselect;
+	struct mutex codec_lock;
+	struct regmap *regmap;
+	struct device *dev;
+	struct tm tm;
+
+	enum device_catlog_id catlog_id;
+	const char *acpi_subsystem_id;
+	unsigned char cal_binaryname[TASDEVICE_MAX_CHANNELS][64];
+	unsigned char crc8_lkp_tbl[CRC8_TABLE_SIZE];
+	unsigned char coef_binaryname[64];
+	unsigned char rca_binaryname[64];
+	unsigned char dev_name[32];
+	unsigned char ndev;
+	unsigned int magic_num;
+	unsigned int chip_id;
+	unsigned int sysclk;
+
+	int cur_prog;
+	int cur_conf;
+	int fw_state;
+	int index;
+	void *client;
+	void *codec;
+	bool force_fwload_status;
+	bool playback_started;
+	bool isacpi;
+	bool isspi;
+	unsigned int global_addr;
+
+	int (*fw_parse_variable_header)(struct tasdevice_priv *tas_priv,
+		const struct firmware *fmw, int offset);
+	int (*fw_parse_program_data)(struct tasdevice_priv *tas_priv,
+		struct tasdevice_fw *tas_fmw,
+		const struct firmware *fmw, int offset);
+	int (*fw_parse_configuration_data)(struct tasdevice_priv *tas_priv,
+		struct tasdevice_fw *tas_fmw,
+		const struct firmware *fmw, int offset);
+	int (*tasdevice_load_block)(struct tasdevice_priv *tas_priv,
+		struct tasdev_blk *block);
+
+	int (*save_calibration)(struct tasdevice_priv *tas_priv);
+	void (*apply_calibration)(struct tasdevice_priv *tas_priv);
+};
+
+int tascodec_init(struct tasdevice_priv *tas_priv, void *codec,
+	struct module *module,
+	void (*cont)(const struct firmware *fw, void *context));
+int tasdevice_save_calibration(struct tasdevice_priv *tas_priv);
+void tasdevice_apply_calibration(struct tasdevice_priv *tas_priv);
+void tasdevice_remove(struct tasdevice_priv *tas_priv);
+int tasdevice_spi_dev_read(struct tasdevice_priv *tas_priv,
+	unsigned short chn, unsigned int reg, unsigned int *value);
+int tasdevice_spi_dev_write(struct tasdevice_priv *tas_priv,
+	unsigned short chn, unsigned int reg, unsigned int value);
+int tasdevice_spi_dev_bulk_write(
+	struct tasdevice_priv *tas_priv, unsigned short chn,
+	unsigned int reg, unsigned char *p_data, unsigned int n_length);
+int tasdevice_spi_dev_bulk_read(struct tasdevice_priv *tas_priv,
+	unsigned short chn, unsigned int reg, unsigned char *p_data,
+	unsigned int n_length);
+int tasdevice_spi_dev_update_bits(
+	struct tasdevice_priv *tasdevice, unsigned short chn,
+	unsigned int reg, unsigned int mask, unsigned int value);
+
+void tasdevice_spi_select_cfg_blk(void *context, int conf_no,
+	unsigned char block_type);
+void tasdevice_spi_config_info_remove(void *context);
+void tasdevice_spi_dsp_remove(void *context);
+int tasdevice_spi_dsp_parser(void *context);
+int tasdevice_spi_rca_parser(void *context, const struct firmware *fmw);
+void tasdevice_spi_dsp_remove(void *context);
+void tasdevice_spi_calbin_remove(void *context);
+int tasdevice_spi_select_tuningprm_cfg(void *context, int prm,
+	int cfg_no, int rca_conf_no);
+int tasdevice_spi_prmg_load(void *context, int prm_no);
+int tasdevice_spi_prmg_calibdata_load(void *context, int prm_no);
+void tasdevice_spi_tuning_switch(void *context, int state);
+int tas2781_spi_load_calibration(void *context, char *file_name,
+	unsigned short i);
+#endif /* __TAS2781_SPI_H__ */
-- 
2.40.1


  parent reply	other threads:[~2024-03-26  1:10 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-26  1:08 [PATCH v1 1/8] ALSA: hda/tas2781: Add tas2781 SPI-based driver Baojun Xu
2024-03-26  1:08 ` [PATCH v1 2/8] " Baojun Xu
2024-03-26 15:00   ` Andy Shevchenko
2024-03-26 15:22     ` Takashi Iwai
2024-03-26  1:09 ` [PATCH v1 3/8] " Baojun Xu
2024-03-26  1:09 ` [PATCH v1 4/8] " Baojun Xu
2024-03-26 15:01   ` Andy Shevchenko
2024-03-26 15:03     ` Andy Shevchenko
2024-03-26  1:09 ` [PATCH v1 5/8] " Baojun Xu
2024-03-26  1:09 ` Baojun Xu [this message]
2024-03-26 15:05   ` [PATCH v1 6/8] " Pierre-Louis Bossart
2024-04-06  7:43     ` [EXTERNAL] " Xu, Baojun
2024-03-26  1:09 ` [PATCH v1 7/8] " Baojun Xu
2024-03-26 15:13   ` Pierre-Louis Bossart
2024-03-26 15:16     ` Andy Shevchenko
2024-03-26 15:15   ` Andy Shevchenko
2024-03-27 10:02   ` Gergo Koteles
2024-04-05 15:51     ` [EXTERNAL] " Xu, Baojun
2024-03-26  1:09 ` [PATCH v1 8/8] " Baojun Xu
2024-03-26 14:58 ` [PATCH v1 1/8] " Andy Shevchenko
2024-04-05 16:17   ` [EXTERNAL] " Xu, Baojun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240326010905.2147-6-baojun.xu@ti.com \
    --to=baojun.xu@ti.com \
    --cc=13916275206@139.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=broonie@kernel.org \
    --cc=kevin-lu@ti.com \
    --cc=lgirdwood@gmail.com \
    --cc=liam.r.girdwood@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=robh+dt@kernel.org \
    --cc=soyer@irl.hu \
    --cc=tiwai@suse.de \
    --cc=yung-chuan.liao@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.