[PATCH] net: dsa: mv88e6xxx: fix usable ports on 88e6020

[Matthias Schiffer <matthias.schiffer@ew.tq-group.com>]

From: Michael Krummsdorf <michael.krummsdorf@tq-group.com>

The switch has 4 ports with 2 internal PHYs, but ports are numbered up
to 6, with ports 0, 1, 5 and 6 being usable.

Fixes: 71d94a432a15 ("net: dsa: mv88e6xxx: add support for MV88E6020 switch")
Signed-off-by: Michael Krummsdorf <michael.krummsdorf@tq-group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
---

I was unfortunately too busy to notice the issue when the patch this
Fixes was resubmitted in my name. It would have been better to change
my From into a Based-on-patch-by or similar when modifying it - and the
final version obviously wasn't even tested on an 88E6020...

Best regards,
Matthias


 drivers/net/dsa/mv88e6xxx/chip.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 9ed1821184ece..c95787cb90867 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -5503,8 +5503,12 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
 		.family = MV88E6XXX_FAMILY_6250,
 		.name = "Marvell 88E6020",
 		.num_databases = 64,
-		.num_ports = 4,
+		/* Ports 2-4 are not routed to pins
+		 * => usable ports 0, 1, 5, 6
+		 */
+		.num_ports = 7,
 		.num_internal_phys = 2,
+		.invalid_port_mask = BIT(2) | BIT(3) | BIT(4),
 		.max_vid = 4095,
 		.port_base_addr = 0x8,
 		.phy_base_addr = 0x0,
-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
https://www.tq-group.com/