All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ai Chao <aichao@kylinos.cn>
To: hdegoede@redhat.com, ilpo.jarvinen@linux.intel.com,
	linux-kernel@vger.kernel.org,
	platform-driver-x86@vger.kernel.org
Cc: Ai Chao <aichao@kylinos.cn>
Subject: [PATCH v12] platform/x86: add lenovo WMI camera button driver
Date: Wed, 27 Mar 2024 16:27:37 +0800	[thread overview]
Message-ID: <20240327082737.336992-1-aichao@kylinos.cn> (raw)

Add lenovo WMI camera button driver to support camera button.
The Camera button is a GPIO device. This driver receives ACPI notifyi
when the camera button is switched on/off. This driver is used in
Lenovo A70, it is a Computer integrated machine.

Signed-off-by: Ai Chao <aichao@kylinos.cn>
---
v12: Remove useless parentheses and unneeded blank line.
v11: Remove input_unregister_device.
v10: Add lenovo_wmi_remove and mutex_destroy.
v9: Add mutex for wmi notify.
v8: Dev_deb convert to dev_err.
v7: Add dev_dbg and remove unused dev in struct.
v6: Modify SW_CAMERA_LENS_COVER to KEY_CAMERA_ACCESS_ENABLE/KEY_CAMERA_ACCESS_DISABLE.
v5: Remove camera button groups, modify KEY_CAMERA to SW_CAMERA_LENS_COVER.
v4: Remove lenovo_wmi_input_setup, move camera_mode into struct lenovo_wmi_priv.
v3: Remove lenovo_wmi_remove function.
v2: Adjust GPL v2 to GPL, adjust sprintf to sysfs_emit.

 drivers/platform/x86/Kconfig             |  12 +++
 drivers/platform/x86/Makefile            |   1 +
 drivers/platform/x86/lenovo-wmi-camera.c | 127 +++++++++++++++++++++++
 3 files changed, 140 insertions(+)
 create mode 100644 drivers/platform/x86/lenovo-wmi-camera.c

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 7e9251fc3341..b8c806506423 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -996,6 +996,18 @@ config INSPUR_PLATFORM_PROFILE
 	To compile this driver as a module, choose M here: the module
 	will be called inspur-platform-profile.
 
+config LENOVO_WMI_CAMERA
+	tristate "Lenovo WMI Camera Button driver"
+	depends on ACPI_WMI
+	depends on INPUT
+	help
+	  This driver provides support for Lenovo camera button. The Camera
+	  button is a GPIO device. This driver receives ACPI notify when the
+	  camera button is switched on/off.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called lenovo-wmi-camera.
+
 source "drivers/platform/x86/x86-android-tablets/Kconfig"
 
 config FW_ATTR_CLASS
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 1de432e8861e..217e94d7c877 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_SENSORS_HDAPS)	+= hdaps.o
 obj-$(CONFIG_THINKPAD_ACPI)	+= thinkpad_acpi.o
 obj-$(CONFIG_THINKPAD_LMI)	+= think-lmi.o
 obj-$(CONFIG_YOGABOOK)		+= lenovo-yogabook.o
+obj-$(CONFIG_LENOVO_WMI_CAMERA)	+= lenovo-wmi-camera.o
 
 # Intel
 obj-y				+= intel/
diff --git a/drivers/platform/x86/lenovo-wmi-camera.c b/drivers/platform/x86/lenovo-wmi-camera.c
new file mode 100644
index 000000000000..0c0bedaf7407
--- /dev/null
+++ b/drivers/platform/x86/lenovo-wmi-camera.c
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Lenovo WMI Camera Button Driver
+ *
+ * Author: Ai Chao <aichao@kylinos.cn>
+ * Copyright (C) 2024 KylinSoft Corporation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/wmi.h>
+
+#define WMI_LENOVO_CAMERABUTTON_EVENT_GUID "50C76F1F-D8E4-D895-0A3D-62F4EA400013"
+
+struct lenovo_wmi_priv {
+	struct input_dev *idev;
+	struct mutex notify_lock;	/* lenovo WMI camera button notify lock */
+};
+
+enum {
+	SW_CAMERA_OFF	= 0,
+	SW_CAMERA_ON	= 1,
+};
+
+static void lenovo_wmi_notify(struct wmi_device *wdev, union acpi_object *obj)
+{
+	struct lenovo_wmi_priv *priv = dev_get_drvdata(&wdev->dev);
+	unsigned int keycode;
+	u8 camera_mode;
+
+	if (obj->type != ACPI_TYPE_BUFFER) {
+		dev_err(&wdev->dev, "Bad response type %u\n", obj->type);
+		return;
+	}
+
+	if (obj->buffer.length != 1) {
+		dev_err(&wdev->dev, "Invalid buffer length %u\n", obj->buffer.length);
+		return;
+	}
+
+	/*
+	 * obj->buffer.pointer[0] is camera mode:
+	 *      0 camera close
+	 *      1 camera open
+	 */
+	camera_mode = obj->buffer.pointer[0];
+	if (camera_mode > SW_CAMERA_ON) {
+		dev_err(&wdev->dev, "Unknown camera mode %u\n", camera_mode);
+		return;
+	}
+
+	mutex_lock(&priv->notify_lock);
+
+	keycode = camera_mode == SW_CAMERA_ON ?
+		   KEY_CAMERA_ACCESS_ENABLE : KEY_CAMERA_ACCESS_DISABLE;
+	input_report_key(priv->idev, keycode, 1);
+	input_sync(priv->idev);
+	input_report_key(priv->idev, keycode, 0);
+	input_sync(priv->idev);
+
+	mutex_unlock(&priv->notify_lock);
+}
+
+static int lenovo_wmi_probe(struct wmi_device *wdev, const void *context)
+{
+	struct lenovo_wmi_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(&wdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	dev_set_drvdata(&wdev->dev, priv);
+
+	priv->idev = devm_input_allocate_device(&wdev->dev);
+	if (!priv->idev)
+		return -ENOMEM;
+
+	priv->idev->name = "Lenovo WMI Camera Button";
+	priv->idev->phys = "wmi/input0";
+	priv->idev->id.bustype = BUS_HOST;
+	priv->idev->dev.parent = &wdev->dev;
+	input_set_capability(priv->idev, EV_KEY, KEY_CAMERA_ACCESS_ENABLE);
+	input_set_capability(priv->idev, EV_KEY, KEY_CAMERA_ACCESS_DISABLE);
+
+	ret = input_register_device(priv->idev);
+	if (ret)
+		return ret;
+
+	mutex_init(&priv->notify_lock);
+
+	return 0;
+}
+
+static void lenovo_wmi_remove(struct wmi_device *wdev)
+{
+	struct lenovo_wmi_priv *priv = dev_get_drvdata(&wdev->dev);
+
+	mutex_destroy(&priv->notify_lock);
+}
+
+static const struct wmi_device_id lenovo_wmi_id_table[] = {
+	{ .guid_string = WMI_LENOVO_CAMERABUTTON_EVENT_GUID },
+	{  }
+};
+MODULE_DEVICE_TABLE(wmi, lenovo_wmi_id_table);
+
+static struct wmi_driver lenovo_wmi_driver = {
+	.driver = {
+		.name = "lenovo-wmi-camera",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.id_table = lenovo_wmi_id_table,
+	.no_singleton = true,
+	.probe = lenovo_wmi_probe,
+	.notify = lenovo_wmi_notify,
+	.remove = lenovo_wmi_remove,
+};
+module_wmi_driver(lenovo_wmi_driver);
+
+MODULE_AUTHOR("Ai Chao <aichao@kylinos.cn>");
+MODULE_DESCRIPTION("Lenovo WMI Camera Button Driver");
+MODULE_LICENSE("GPL");
-- 
2.25.1


             reply	other threads:[~2024-03-27  8:27 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-27  8:27 Ai Chao [this message]
2024-03-27 20:00 ` [PATCH v12] platform/x86: add lenovo WMI camera button driver Hans de Goede
2024-03-27 23:35 ` Kuppuswamy Sathyanarayanan
2024-04-08 13:23   ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240327082737.336992-1-aichao@kylinos.cn \
    --to=aichao@kylinos.cn \
    --cc=hdegoede@redhat.com \
    --cc=ilpo.jarvinen@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.