From: Danila Tikhonov <danila@jiaxyga.com> To: andersson@kernel.org, konrad.dybcio@linaro.org, vkoul@kernel.org, kishon@kernel.org, robh@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org Cc: linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Danila Tikhonov <danila@jiaxyga.com> Subject: [PATCH 2/2] phy: qcom-qmp-ufs: Add SM8475 support Date: Wed, 27 Mar 2024 21:06:42 +0300 [thread overview] Message-ID: <20240327180642.20146-3-danila@jiaxyga.com> (raw) In-Reply-To: <20240327180642.20146-1-danila@jiaxyga.com> Add the tables and constants for init sequences for UFS QMP phy found in SM8475 SoC. Signed-off-by: Danila Tikhonov <danila@jiaxyga.com> --- drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 71 +++++++++++++++++++++++++ 1 file changed, 71 insertions(+) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c index 590432d581f9..ddc0def0ae61 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c @@ -722,6 +722,38 @@ static const struct qmp_phy_init_tbl sm8350_ufsphy_g4_pcs[] = { QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_BIST_FIXED_PAT_CTRL, 0x0a), }; +static const struct qmp_phy_init_tbl sm8475_ufsphy_serdes[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0xd9), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x11), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_HS_SWITCH_SEL_1, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_INITVAL2, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x82), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x18), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0xff), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x0c), +}; + +static const struct qmp_phy_init_tbl sm8475_ufsphy_g4_serdes[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x98), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x18), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x18), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x32), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x0f), +}; + +static const struct qmp_phy_init_tbl sm8475_ufsphy_g4_pcs[] = { + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x0b), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x04), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x04), +}; + static const struct qmp_phy_init_tbl sm8550_ufsphy_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0xd9), QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x16), @@ -1346,6 +1378,42 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = { .regs = ufsphy_v5_regs_layout, }; +static const struct qmp_phy_cfg sm8475_ufsphy_cfg = { + .lanes = 2, + + .offsets = &qmp_ufs_offsets_v6, + .max_supported_gear = UFS_HS_G4, + + .tbls = { + .serdes = sm8475_ufsphy_serdes, + .serdes_num = ARRAY_SIZE(sm8475_ufsphy_serdes), + .tx = sm8550_ufsphy_tx, + .tx_num = ARRAY_SIZE(sm8550_ufsphy_tx), + .rx = sm8550_ufsphy_rx, + .rx_num = ARRAY_SIZE(sm8550_ufsphy_rx), + .pcs = sm8550_ufsphy_pcs, + .pcs_num = ARRAY_SIZE(sm8550_ufsphy_pcs), + }, + .tbls_hs_b = { + .serdes = sm8550_ufsphy_hs_b_serdes, + .serdes_num = ARRAY_SIZE(sm8550_ufsphy_hs_b_serdes), + }, + .tbls_hs_overlay[0] = { + .serdes = sm8475_ufsphy_g4_serdes, + .serdes_num = ARRAY_SIZE(sm8475_ufsphy_g4_serdes), + .tx = sm8550_ufsphy_g4_tx, + .tx_num = ARRAY_SIZE(sm8550_ufsphy_g4_tx), + .rx = sm8550_ufsphy_g4_rx, + .rx_num = ARRAY_SIZE(sm8550_ufsphy_g4_rx), + .pcs = sm8475_ufsphy_g4_pcs, + .pcs_num = ARRAY_SIZE(sm8475_ufsphy_g4_pcs), + .max_gear = UFS_HS_G4, + }, + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), + .regs = ufsphy_v6_regs_layout, +}; + static const struct qmp_phy_cfg sm8550_ufsphy_cfg = { .lanes = 2, @@ -1941,6 +2009,9 @@ static const struct of_device_id qmp_ufs_of_match_table[] = { }, { .compatible = "qcom,sm8450-qmp-ufs-phy", .data = &sm8450_ufsphy_cfg, + }, { + .compatible = "qcom,sm8475-qmp-ufs-phy", + .data = &sm8475_ufsphy_cfg, }, { .compatible = "qcom,sm8550-qmp-ufs-phy", .data = &sm8550_ufsphy_cfg, -- 2.44.0 -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy
WARNING: multiple messages have this Message-ID (diff)
From: Danila Tikhonov <danila@jiaxyga.com> To: andersson@kernel.org, konrad.dybcio@linaro.org, vkoul@kernel.org, kishon@kernel.org, robh@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org Cc: linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Danila Tikhonov <danila@jiaxyga.com> Subject: [PATCH 2/2] phy: qcom-qmp-ufs: Add SM8475 support Date: Wed, 27 Mar 2024 21:06:42 +0300 [thread overview] Message-ID: <20240327180642.20146-3-danila@jiaxyga.com> (raw) In-Reply-To: <20240327180642.20146-1-danila@jiaxyga.com> Add the tables and constants for init sequences for UFS QMP phy found in SM8475 SoC. Signed-off-by: Danila Tikhonov <danila@jiaxyga.com> --- drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 71 +++++++++++++++++++++++++ 1 file changed, 71 insertions(+) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c index 590432d581f9..ddc0def0ae61 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c @@ -722,6 +722,38 @@ static const struct qmp_phy_init_tbl sm8350_ufsphy_g4_pcs[] = { QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_BIST_FIXED_PAT_CTRL, 0x0a), }; +static const struct qmp_phy_init_tbl sm8475_ufsphy_serdes[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0xd9), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x11), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_HS_SWITCH_SEL_1, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_INITVAL2, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x82), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x18), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0xff), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x0c), +}; + +static const struct qmp_phy_init_tbl sm8475_ufsphy_g4_serdes[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x98), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x18), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x18), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x32), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x0f), +}; + +static const struct qmp_phy_init_tbl sm8475_ufsphy_g4_pcs[] = { + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x0b), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x04), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x04), +}; + static const struct qmp_phy_init_tbl sm8550_ufsphy_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0xd9), QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x16), @@ -1346,6 +1378,42 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = { .regs = ufsphy_v5_regs_layout, }; +static const struct qmp_phy_cfg sm8475_ufsphy_cfg = { + .lanes = 2, + + .offsets = &qmp_ufs_offsets_v6, + .max_supported_gear = UFS_HS_G4, + + .tbls = { + .serdes = sm8475_ufsphy_serdes, + .serdes_num = ARRAY_SIZE(sm8475_ufsphy_serdes), + .tx = sm8550_ufsphy_tx, + .tx_num = ARRAY_SIZE(sm8550_ufsphy_tx), + .rx = sm8550_ufsphy_rx, + .rx_num = ARRAY_SIZE(sm8550_ufsphy_rx), + .pcs = sm8550_ufsphy_pcs, + .pcs_num = ARRAY_SIZE(sm8550_ufsphy_pcs), + }, + .tbls_hs_b = { + .serdes = sm8550_ufsphy_hs_b_serdes, + .serdes_num = ARRAY_SIZE(sm8550_ufsphy_hs_b_serdes), + }, + .tbls_hs_overlay[0] = { + .serdes = sm8475_ufsphy_g4_serdes, + .serdes_num = ARRAY_SIZE(sm8475_ufsphy_g4_serdes), + .tx = sm8550_ufsphy_g4_tx, + .tx_num = ARRAY_SIZE(sm8550_ufsphy_g4_tx), + .rx = sm8550_ufsphy_g4_rx, + .rx_num = ARRAY_SIZE(sm8550_ufsphy_g4_rx), + .pcs = sm8475_ufsphy_g4_pcs, + .pcs_num = ARRAY_SIZE(sm8475_ufsphy_g4_pcs), + .max_gear = UFS_HS_G4, + }, + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), + .regs = ufsphy_v6_regs_layout, +}; + static const struct qmp_phy_cfg sm8550_ufsphy_cfg = { .lanes = 2, @@ -1941,6 +2009,9 @@ static const struct of_device_id qmp_ufs_of_match_table[] = { }, { .compatible = "qcom,sm8450-qmp-ufs-phy", .data = &sm8450_ufsphy_cfg, + }, { + .compatible = "qcom,sm8475-qmp-ufs-phy", + .data = &sm8475_ufsphy_cfg, }, { .compatible = "qcom,sm8550-qmp-ufs-phy", .data = &sm8550_ufsphy_cfg, -- 2.44.0
next prev parent reply other threads:[~2024-03-27 18:07 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-03-27 18:06 [PATCH 0/2] phy: qcom-qmp-ufs: Add support for SM8475 Danila Tikhonov 2024-03-27 18:06 ` Danila Tikhonov 2024-03-27 18:06 ` [PATCH 1/2] dt-bindings: phy: Add QMP UFS PHY comptible " Danila Tikhonov 2024-03-27 18:06 ` Danila Tikhonov 2024-03-28 8:42 ` Krzysztof Kozlowski 2024-03-28 8:42 ` Krzysztof Kozlowski 2024-03-28 18:02 ` Danila Tikhonov 2024-03-28 18:02 ` Danila Tikhonov 2024-03-28 18:05 ` Krzysztof Kozlowski 2024-03-28 18:05 ` Krzysztof Kozlowski 2024-03-27 18:06 ` Danila Tikhonov [this message] 2024-03-27 18:06 ` [PATCH 2/2] phy: qcom-qmp-ufs: Add SM8475 support Danila Tikhonov 2024-03-27 21:38 ` Konrad Dybcio 2024-03-27 21:38 ` Konrad Dybcio 2024-03-28 7:45 ` Vinod Koul 2024-03-28 7:45 ` Vinod Koul 2024-03-29 11:23 ` Konrad Dybcio 2024-03-29 11:23 ` Konrad Dybcio
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240327180642.20146-3-danila@jiaxyga.com \ --to=danila@jiaxyga.com \ --cc=andersson@kernel.org \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=kishon@kernel.org \ --cc=konrad.dybcio@linaro.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-phy@lists.infradead.org \ --cc=robh@kernel.org \ --cc=vkoul@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.