From: git@luigi311.com To: linux-media@vger.kernel.org Cc: dave.stevenson@raspberrypi.com, jacopo.mondi@ideasonboard.com, mchehab@kernel.org, robh@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com, sakari.ailus@linux.intel.com, devicetree@vger.kernel.org, imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, x@xnux.eu Subject: [PATCH 06/23] media: i2c: imx258: Make V4L2_CID_VBLANK configurable. Date: Wed, 27 Mar 2024 16:20:18 -0600 [thread overview] Message-ID: <20240327222035.47208-7-git@luigi311.com> (raw) In-Reply-To: <20240327222035.47208-1-git@luigi311.com> From: Dave Stevenson <dave.stevenson@raspberrypi.com> The values and ranges of V4L2_CID_VBLANK are all computed, so there is no reason for it to be a read only control. Remove the register values from the mode lists, add the handler, and remove the read only flag. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> --- drivers/media/i2c/imx258.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c index 495eaada2945..321b504c6a48 100644 --- a/drivers/media/i2c/imx258.c +++ b/drivers/media/i2c/imx258.c @@ -30,6 +30,8 @@ #define IMX258_VTS_30FPS_VGA 0x034c #define IMX258_VTS_MAX 0xffff +#define IMX258_REG_VTS 0x0340 + /* HBLANK control - read only */ #define IMX258_PPL_DEFAULT 5352 @@ -202,8 +204,6 @@ static const struct imx258_reg mode_4208x3120_regs[] = { { 0x0114, 0x03 }, { 0x0342, 0x14 }, { 0x0343, 0xE8 }, - { 0x0340, 0x0C }, - { 0x0341, 0x50 }, { 0x0344, 0x00 }, { 0x0345, 0x00 }, { 0x0346, 0x00 }, @@ -319,8 +319,6 @@ static const struct imx258_reg mode_2104_1560_regs[] = { { 0x0114, 0x03 }, { 0x0342, 0x14 }, { 0x0343, 0xE8 }, - { 0x0340, 0x06 }, - { 0x0341, 0x38 }, { 0x0344, 0x00 }, { 0x0345, 0x00 }, { 0x0346, 0x00 }, @@ -436,8 +434,6 @@ static const struct imx258_reg mode_1048_780_regs[] = { { 0x0114, 0x03 }, { 0x0342, 0x14 }, { 0x0343, 0xE8 }, - { 0x0340, 0x03 }, - { 0x0341, 0x4C }, { 0x0344, 0x00 }, { 0x0345, 0x00 }, { 0x0346, 0x00 }, @@ -800,6 +796,11 @@ static int imx258_set_ctrl(struct v4l2_ctrl *ctrl) BIT(IMX258_HDR_RATIO_MAX)); } break; + case V4L2_CID_VBLANK: + ret = imx258_write_reg(imx258, IMX258_REG_VTS, + IMX258_REG_VALUE_16BIT, + imx258->cur_mode->height + ctrl->val); + break; default: dev_info(&client->dev, "ctrl(id:0x%x,val:0x%x) is not handled\n", @@ -1174,9 +1175,6 @@ static int imx258_init_controls(struct imx258 *imx258) IMX258_VTS_MAX - imx258->cur_mode->height, 1, vblank_def); - if (imx258->vblank) - imx258->vblank->flags |= V4L2_CTRL_FLAG_READ_ONLY; - imx258->hblank = v4l2_ctrl_new_std( ctrl_hdlr, &imx258_ctrl_ops, V4L2_CID_HBLANK, IMX258_PPL_DEFAULT - imx258->cur_mode->width, -- 2.42.0
WARNING: multiple messages have this Message-ID (diff)
From: git@luigi311.com To: linux-media@vger.kernel.org Cc: dave.stevenson@raspberrypi.com, jacopo.mondi@ideasonboard.com, mchehab@kernel.org, robh@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com, sakari.ailus@linux.intel.com, devicetree@vger.kernel.org, imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, x@xnux.eu Subject: [PATCH 06/23] media: i2c: imx258: Make V4L2_CID_VBLANK configurable. Date: Wed, 27 Mar 2024 16:20:18 -0600 [thread overview] Message-ID: <20240327222035.47208-7-git@luigi311.com> (raw) In-Reply-To: <20240327222035.47208-1-git@luigi311.com> From: Dave Stevenson <dave.stevenson@raspberrypi.com> The values and ranges of V4L2_CID_VBLANK are all computed, so there is no reason for it to be a read only control. Remove the register values from the mode lists, add the handler, and remove the read only flag. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> --- drivers/media/i2c/imx258.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c index 495eaada2945..321b504c6a48 100644 --- a/drivers/media/i2c/imx258.c +++ b/drivers/media/i2c/imx258.c @@ -30,6 +30,8 @@ #define IMX258_VTS_30FPS_VGA 0x034c #define IMX258_VTS_MAX 0xffff +#define IMX258_REG_VTS 0x0340 + /* HBLANK control - read only */ #define IMX258_PPL_DEFAULT 5352 @@ -202,8 +204,6 @@ static const struct imx258_reg mode_4208x3120_regs[] = { { 0x0114, 0x03 }, { 0x0342, 0x14 }, { 0x0343, 0xE8 }, - { 0x0340, 0x0C }, - { 0x0341, 0x50 }, { 0x0344, 0x00 }, { 0x0345, 0x00 }, { 0x0346, 0x00 }, @@ -319,8 +319,6 @@ static const struct imx258_reg mode_2104_1560_regs[] = { { 0x0114, 0x03 }, { 0x0342, 0x14 }, { 0x0343, 0xE8 }, - { 0x0340, 0x06 }, - { 0x0341, 0x38 }, { 0x0344, 0x00 }, { 0x0345, 0x00 }, { 0x0346, 0x00 }, @@ -436,8 +434,6 @@ static const struct imx258_reg mode_1048_780_regs[] = { { 0x0114, 0x03 }, { 0x0342, 0x14 }, { 0x0343, 0xE8 }, - { 0x0340, 0x03 }, - { 0x0341, 0x4C }, { 0x0344, 0x00 }, { 0x0345, 0x00 }, { 0x0346, 0x00 }, @@ -800,6 +796,11 @@ static int imx258_set_ctrl(struct v4l2_ctrl *ctrl) BIT(IMX258_HDR_RATIO_MAX)); } break; + case V4L2_CID_VBLANK: + ret = imx258_write_reg(imx258, IMX258_REG_VTS, + IMX258_REG_VALUE_16BIT, + imx258->cur_mode->height + ctrl->val); + break; default: dev_info(&client->dev, "ctrl(id:0x%x,val:0x%x) is not handled\n", @@ -1174,9 +1175,6 @@ static int imx258_init_controls(struct imx258 *imx258) IMX258_VTS_MAX - imx258->cur_mode->height, 1, vblank_def); - if (imx258->vblank) - imx258->vblank->flags |= V4L2_CTRL_FLAG_READ_ONLY; - imx258->hblank = v4l2_ctrl_new_std( ctrl_hdlr, &imx258_ctrl_ops, V4L2_CID_HBLANK, IMX258_PPL_DEFAULT - imx258->cur_mode->width, -- 2.42.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-03-27 22:26 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-03-27 22:20 [PATCH 00/23] v2: imx258 improvement series git 2024-03-27 22:20 ` git 2024-03-27 22:20 ` [PATCH 01/23] media: i2c: imx258: Remove unused defines git 2024-03-27 22:20 ` git 2024-03-27 22:20 ` [PATCH 02/23] media: i2c: imx258: Make image geometry meet sensor requirements git 2024-03-27 22:20 ` git 2024-03-27 22:20 ` [PATCH 03/23] media: i2c: imx258: Disable digital cropping on binned modes git 2024-03-27 22:20 ` git 2024-03-27 22:20 ` [PATCH 04/23] media: i2c: imx258: Remove redundant I2C writes git 2024-03-27 22:20 ` git 2024-03-27 22:20 ` [PATCH 05/23] media: i2c: imx258: Add regulator control git 2024-03-27 22:20 ` git 2024-03-27 22:20 ` git [this message] 2024-03-27 22:20 ` [PATCH 06/23] media: i2c: imx258: Make V4L2_CID_VBLANK configurable git 2024-03-27 22:20 ` [PATCH 07/23] media: i2c: imx258: Split out common registers from the mode based ones git 2024-03-27 22:20 ` git 2024-03-27 22:20 ` [PATCH 08/23] media: i2c: imx258: Add support for 24MHz clock git 2024-03-27 22:20 ` git 2024-03-27 22:20 ` [PATCH 09/23] media: i2c: imx258: Add support for running on 2 CSI data lanes git 2024-03-27 22:20 ` git 2024-03-27 22:20 ` [PATCH 10/23] media: i2c: imx258: Follow normal V4L2 behaviours for clipping exposure git 2024-03-27 22:20 ` git 2024-03-27 23:16 [PATCH 00/23] v2: imx258 improvement series git 2024-03-27 23:16 ` [PATCH 06/23] media: i2c: imx258: Make V4L2_CID_VBLANK configurable git 2024-03-27 23:16 ` git
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240327222035.47208-7-git@luigi311.com \ --to=git@luigi311.com \ --cc=conor+dt@kernel.org \ --cc=dave.stevenson@raspberrypi.com \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=imx@lists.linux.dev \ --cc=jacopo.mondi@ideasonboard.com \ --cc=kernel@pengutronix.de \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=mchehab@kernel.org \ --cc=robh@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=sakari.ailus@linux.intel.com \ --cc=shawnguo@kernel.org \ --cc=x@xnux.eu \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.