From: git@luigi311.com To: linux-media@vger.kernel.org Cc: dave.stevenson@raspberrypi.com, jacopo.mondi@ideasonboard.com, mchehab@kernel.org, robh@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com, sakari.ailus@linux.intel.com, devicetree@vger.kernel.org, imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Luigi311 <git@luigi311.com> Subject: [PATCH 08/23] media: i2c: imx258: Add support for 24MHz clock Date: Wed, 27 Mar 2024 17:16:54 -0600 [thread overview] Message-ID: <20240327231710.53188-9-git@luigi311.com> (raw) In-Reply-To: <20240327231710.53188-1-git@luigi311.com> From: Dave Stevenson <dave.stevenson@raspberrypi.com> There's no reason why only a clock of 19.2MHz is supported. Indeed this isn't even a frequency listed in the datasheet. Add support for 24MHz as well. The PLL settings result in slightly different link frequencies, so parameterise those. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Luigi311 <git@luigi311.com> --- drivers/media/i2c/imx258.c | 133 +++++++++++++++++++++++++++++-------- 1 file changed, 107 insertions(+), 26 deletions(-) diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c index 351add1bc5d5..6ee7de079454 100644 --- a/drivers/media/i2c/imx258.c +++ b/drivers/media/i2c/imx258.c @@ -76,9 +76,6 @@ #define REG_CONFIG_MIRROR_FLIP 0x03 #define REG_CONFIG_FLIP_TEST_PATTERN 0x02 -/* Input clock frequency in Hz */ -#define IMX258_INPUT_CLOCK_FREQ 19200000 - struct imx258_reg { u16 address; u8 val; @@ -115,7 +112,9 @@ struct imx258_mode { }; /* 4208x3120 needs 1267Mbps/lane, 4 lanes */ -static const struct imx258_reg mipi_data_rate_1267mbps[] = { +static const struct imx258_reg mipi_1267mbps_19_2mhz[] = { + { 0x0136, 0x13 }, + { 0x0137, 0x33 }, { 0x0301, 0x05 }, { 0x0303, 0x02 }, { 0x0305, 0x03 }, @@ -133,7 +132,29 @@ static const struct imx258_reg mipi_data_rate_1267mbps[] = { { 0x0823, 0xCC }, }; -static const struct imx258_reg mipi_data_rate_640mbps[] = { +static const struct imx258_reg mipi_1272mbps_24mhz[] = { + { 0x0136, 0x18 }, + { 0x0137, 0x00 }, + { 0x0301, 0x05 }, + { 0x0303, 0x02 }, + { 0x0305, 0x04 }, + { 0x0306, 0x00 }, + { 0x0307, 0xD4 }, + { 0x0309, 0x0A }, + { 0x030B, 0x01 }, + { 0x030D, 0x02 }, + { 0x030E, 0x00 }, + { 0x030F, 0xD8 }, + { 0x0310, 0x00 }, + { 0x0820, 0x13 }, + { 0x0821, 0x4C }, + { 0x0822, 0xCC }, + { 0x0823, 0xCC }, +}; + +static const struct imx258_reg mipi_640mbps_19_2mhz[] = { + { 0x0136, 0x13 }, + { 0x0137, 0x33 }, { 0x0301, 0x05 }, { 0x0303, 0x02 }, { 0x0305, 0x03 }, @@ -151,9 +172,27 @@ static const struct imx258_reg mipi_data_rate_640mbps[] = { { 0x0823, 0x00 }, }; +static const struct imx258_reg mipi_642mbps_24mhz[] = { + { 0x0136, 0x18 }, + { 0x0137, 0x00 }, + { 0x0301, 0x05 }, + { 0x0303, 0x02 }, + { 0x0305, 0x04 }, + { 0x0306, 0x00 }, + { 0x0307, 0x6B }, + { 0x0309, 0x0A }, + { 0x030B, 0x01 }, + { 0x030D, 0x02 }, + { 0x030E, 0x00 }, + { 0x030F, 0xD8 }, + { 0x0310, 0x00 }, + { 0x0820, 0x0A }, + { 0x0821, 0x00 }, + { 0x0822, 0x00 }, + { 0x0823, 0x00 }, +}; + static const struct imx258_reg mode_common_regs[] = { - { 0x0136, 0x13 }, - { 0x0137, 0x33 }, { 0x3051, 0x00 }, { 0x3052, 0x00 }, { 0x4E21, 0x14 }, @@ -313,10 +352,6 @@ static const char * const imx258_supply_name[] = { #define IMX258_NUM_SUPPLIES ARRAY_SIZE(imx258_supply_name) -/* Configurations for supported link frequencies */ -#define IMX258_LINK_FREQ_634MHZ 633600000ULL -#define IMX258_LINK_FREQ_320MHZ 320000000ULL - enum { IMX258_LINK_FREQ_1267MBPS, IMX258_LINK_FREQ_640MBPS, @@ -335,25 +370,55 @@ static u64 link_freq_to_pixel_rate(u64 f) } /* Menu items for LINK_FREQ V4L2 control */ -static const s64 link_freq_menu_items[] = { +/* Configurations for supported link frequencies */ +#define IMX258_LINK_FREQ_634MHZ 633600000ULL +#define IMX258_LINK_FREQ_320MHZ 320000000ULL + +static const s64 link_freq_menu_items_19_2[] = { IMX258_LINK_FREQ_634MHZ, IMX258_LINK_FREQ_320MHZ, }; +/* Configurations for supported link frequencies */ +#define IMX258_LINK_FREQ_636MHZ 636000000ULL +#define IMX258_LINK_FREQ_321MHZ 321000000ULL + +static const s64 link_freq_menu_items_24[] = { + IMX258_LINK_FREQ_636MHZ, + IMX258_LINK_FREQ_321MHZ, +}; + /* Link frequency configs */ -static const struct imx258_link_freq_config link_freq_configs[] = { +static const struct imx258_link_freq_config link_freq_configs_19_2[] = { [IMX258_LINK_FREQ_1267MBPS] = { .pixels_per_line = IMX258_PPL_DEFAULT, .reg_list = { - .num_of_regs = ARRAY_SIZE(mipi_data_rate_1267mbps), - .regs = mipi_data_rate_1267mbps, + .num_of_regs = ARRAY_SIZE(mipi_1267mbps_19_2mhz), + .regs = mipi_1267mbps_19_2mhz, } }, [IMX258_LINK_FREQ_640MBPS] = { .pixels_per_line = IMX258_PPL_DEFAULT, .reg_list = { - .num_of_regs = ARRAY_SIZE(mipi_data_rate_640mbps), - .regs = mipi_data_rate_640mbps, + .num_of_regs = ARRAY_SIZE(mipi_640mbps_19_2mhz), + .regs = mipi_640mbps_19_2mhz, + } + }, +}; + +static const struct imx258_link_freq_config link_freq_configs_24[] = { + [IMX258_LINK_FREQ_1267MBPS] = { + .pixels_per_line = IMX258_PPL_DEFAULT, + .reg_list = { + .num_of_regs = ARRAY_SIZE(mipi_1272mbps_24mhz), + .regs = mipi_1272mbps_24mhz, + } + }, + [IMX258_LINK_FREQ_640MBPS] = { + .pixels_per_line = IMX258_PPL_DEFAULT, + .reg_list = { + .num_of_regs = ARRAY_SIZE(mipi_642mbps_24mhz), + .regs = mipi_642mbps_24mhz, } }, }; @@ -410,6 +475,9 @@ struct imx258 { /* Current mode */ const struct imx258_mode *cur_mode; + const struct imx258_link_freq_config *link_freq_configs; + const s64 *link_freq_menu_items; + /* * Mutex for serialized access: * Protect sensor module set pad format and start/stop streaming safely. @@ -713,7 +781,7 @@ static int imx258_set_pad_format(struct v4l2_subdev *sd, imx258->cur_mode = mode; __v4l2_ctrl_s_ctrl(imx258->link_freq, mode->link_freq_index); - link_freq = link_freq_menu_items[mode->link_freq_index]; + link_freq = imx258->link_freq_menu_items[mode->link_freq_index]; pixel_rate = link_freq_to_pixel_rate(link_freq); __v4l2_ctrl_s_ctrl_int64(imx258->pixel_rate, pixel_rate); /* Update limits and set FPS to default */ @@ -727,7 +795,7 @@ static int imx258_set_pad_format(struct v4l2_subdev *sd, vblank_def); __v4l2_ctrl_s_ctrl(imx258->vblank, vblank_def); h_blank = - link_freq_configs[mode->link_freq_index].pixels_per_line + imx258->link_freq_configs[mode->link_freq_index].pixels_per_line - imx258->cur_mode->width; __v4l2_ctrl_modify_range(imx258->hblank, h_blank, h_blank, 1, h_blank); @@ -747,7 +815,7 @@ static int imx258_start_streaming(struct imx258 *imx258) /* Setup PLL */ link_freq_index = imx258->cur_mode->link_freq_index; - reg_list = &link_freq_configs[link_freq_index].reg_list; + reg_list = &imx258->link_freq_configs[link_freq_index].reg_list; ret = imx258_write_regs(imx258, reg_list->regs, reg_list->num_of_regs); if (ret) { dev_err(&client->dev, "%s failed to set plls\n", __func__); @@ -946,9 +1014,9 @@ static int imx258_init_controls(struct imx258 *imx258) imx258->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr, &imx258_ctrl_ops, V4L2_CID_LINK_FREQ, - ARRAY_SIZE(link_freq_menu_items) - 1, + ARRAY_SIZE(link_freq_menu_items_19_2) - 1, 0, - link_freq_menu_items); + imx258->link_freq_menu_items); if (imx258->link_freq) imx258->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; @@ -964,8 +1032,10 @@ static int imx258_init_controls(struct imx258 *imx258) if (vflip) vflip->flags |= V4L2_CTRL_FLAG_READ_ONLY; - pixel_rate_max = link_freq_to_pixel_rate(link_freq_menu_items[0]); - pixel_rate_min = link_freq_to_pixel_rate(link_freq_menu_items[1]); + pixel_rate_max = + link_freq_to_pixel_rate(imx258->link_freq_menu_items[0]); + pixel_rate_min = + link_freq_to_pixel_rate(imx258->link_freq_menu_items[1]); /* By default, PIXEL_RATE is read only */ imx258->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &imx258_ctrl_ops, V4L2_CID_PIXEL_RATE, @@ -1086,8 +1156,19 @@ static int imx258_probe(struct i2c_client *client) } else { val = clk_get_rate(imx258->clk); } - if (val != IMX258_INPUT_CLOCK_FREQ) { - dev_err(&client->dev, "input clock frequency not supported\n"); + + switch (val) { + case 19200000: + imx258->link_freq_configs = link_freq_configs_19_2; + imx258->link_freq_menu_items = link_freq_menu_items_19_2; + break; + case 24000000: + imx258->link_freq_configs = link_freq_configs_24; + imx258->link_freq_menu_items = link_freq_menu_items_24; + break; + default: + dev_err(&client->dev, "input clock frequency of %u not supported\n", + val); return -EINVAL; } -- 2.42.0
WARNING: multiple messages have this Message-ID (diff)
From: git@luigi311.com To: linux-media@vger.kernel.org Cc: dave.stevenson@raspberrypi.com, jacopo.mondi@ideasonboard.com, mchehab@kernel.org, robh@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com, sakari.ailus@linux.intel.com, devicetree@vger.kernel.org, imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Luigi311 <git@luigi311.com> Subject: [PATCH 08/23] media: i2c: imx258: Add support for 24MHz clock Date: Wed, 27 Mar 2024 17:16:54 -0600 [thread overview] Message-ID: <20240327231710.53188-9-git@luigi311.com> (raw) In-Reply-To: <20240327231710.53188-1-git@luigi311.com> From: Dave Stevenson <dave.stevenson@raspberrypi.com> There's no reason why only a clock of 19.2MHz is supported. Indeed this isn't even a frequency listed in the datasheet. Add support for 24MHz as well. The PLL settings result in slightly different link frequencies, so parameterise those. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Luigi311 <git@luigi311.com> --- drivers/media/i2c/imx258.c | 133 +++++++++++++++++++++++++++++-------- 1 file changed, 107 insertions(+), 26 deletions(-) diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c index 351add1bc5d5..6ee7de079454 100644 --- a/drivers/media/i2c/imx258.c +++ b/drivers/media/i2c/imx258.c @@ -76,9 +76,6 @@ #define REG_CONFIG_MIRROR_FLIP 0x03 #define REG_CONFIG_FLIP_TEST_PATTERN 0x02 -/* Input clock frequency in Hz */ -#define IMX258_INPUT_CLOCK_FREQ 19200000 - struct imx258_reg { u16 address; u8 val; @@ -115,7 +112,9 @@ struct imx258_mode { }; /* 4208x3120 needs 1267Mbps/lane, 4 lanes */ -static const struct imx258_reg mipi_data_rate_1267mbps[] = { +static const struct imx258_reg mipi_1267mbps_19_2mhz[] = { + { 0x0136, 0x13 }, + { 0x0137, 0x33 }, { 0x0301, 0x05 }, { 0x0303, 0x02 }, { 0x0305, 0x03 }, @@ -133,7 +132,29 @@ static const struct imx258_reg mipi_data_rate_1267mbps[] = { { 0x0823, 0xCC }, }; -static const struct imx258_reg mipi_data_rate_640mbps[] = { +static const struct imx258_reg mipi_1272mbps_24mhz[] = { + { 0x0136, 0x18 }, + { 0x0137, 0x00 }, + { 0x0301, 0x05 }, + { 0x0303, 0x02 }, + { 0x0305, 0x04 }, + { 0x0306, 0x00 }, + { 0x0307, 0xD4 }, + { 0x0309, 0x0A }, + { 0x030B, 0x01 }, + { 0x030D, 0x02 }, + { 0x030E, 0x00 }, + { 0x030F, 0xD8 }, + { 0x0310, 0x00 }, + { 0x0820, 0x13 }, + { 0x0821, 0x4C }, + { 0x0822, 0xCC }, + { 0x0823, 0xCC }, +}; + +static const struct imx258_reg mipi_640mbps_19_2mhz[] = { + { 0x0136, 0x13 }, + { 0x0137, 0x33 }, { 0x0301, 0x05 }, { 0x0303, 0x02 }, { 0x0305, 0x03 }, @@ -151,9 +172,27 @@ static const struct imx258_reg mipi_data_rate_640mbps[] = { { 0x0823, 0x00 }, }; +static const struct imx258_reg mipi_642mbps_24mhz[] = { + { 0x0136, 0x18 }, + { 0x0137, 0x00 }, + { 0x0301, 0x05 }, + { 0x0303, 0x02 }, + { 0x0305, 0x04 }, + { 0x0306, 0x00 }, + { 0x0307, 0x6B }, + { 0x0309, 0x0A }, + { 0x030B, 0x01 }, + { 0x030D, 0x02 }, + { 0x030E, 0x00 }, + { 0x030F, 0xD8 }, + { 0x0310, 0x00 }, + { 0x0820, 0x0A }, + { 0x0821, 0x00 }, + { 0x0822, 0x00 }, + { 0x0823, 0x00 }, +}; + static const struct imx258_reg mode_common_regs[] = { - { 0x0136, 0x13 }, - { 0x0137, 0x33 }, { 0x3051, 0x00 }, { 0x3052, 0x00 }, { 0x4E21, 0x14 }, @@ -313,10 +352,6 @@ static const char * const imx258_supply_name[] = { #define IMX258_NUM_SUPPLIES ARRAY_SIZE(imx258_supply_name) -/* Configurations for supported link frequencies */ -#define IMX258_LINK_FREQ_634MHZ 633600000ULL -#define IMX258_LINK_FREQ_320MHZ 320000000ULL - enum { IMX258_LINK_FREQ_1267MBPS, IMX258_LINK_FREQ_640MBPS, @@ -335,25 +370,55 @@ static u64 link_freq_to_pixel_rate(u64 f) } /* Menu items for LINK_FREQ V4L2 control */ -static const s64 link_freq_menu_items[] = { +/* Configurations for supported link frequencies */ +#define IMX258_LINK_FREQ_634MHZ 633600000ULL +#define IMX258_LINK_FREQ_320MHZ 320000000ULL + +static const s64 link_freq_menu_items_19_2[] = { IMX258_LINK_FREQ_634MHZ, IMX258_LINK_FREQ_320MHZ, }; +/* Configurations for supported link frequencies */ +#define IMX258_LINK_FREQ_636MHZ 636000000ULL +#define IMX258_LINK_FREQ_321MHZ 321000000ULL + +static const s64 link_freq_menu_items_24[] = { + IMX258_LINK_FREQ_636MHZ, + IMX258_LINK_FREQ_321MHZ, +}; + /* Link frequency configs */ -static const struct imx258_link_freq_config link_freq_configs[] = { +static const struct imx258_link_freq_config link_freq_configs_19_2[] = { [IMX258_LINK_FREQ_1267MBPS] = { .pixels_per_line = IMX258_PPL_DEFAULT, .reg_list = { - .num_of_regs = ARRAY_SIZE(mipi_data_rate_1267mbps), - .regs = mipi_data_rate_1267mbps, + .num_of_regs = ARRAY_SIZE(mipi_1267mbps_19_2mhz), + .regs = mipi_1267mbps_19_2mhz, } }, [IMX258_LINK_FREQ_640MBPS] = { .pixels_per_line = IMX258_PPL_DEFAULT, .reg_list = { - .num_of_regs = ARRAY_SIZE(mipi_data_rate_640mbps), - .regs = mipi_data_rate_640mbps, + .num_of_regs = ARRAY_SIZE(mipi_640mbps_19_2mhz), + .regs = mipi_640mbps_19_2mhz, + } + }, +}; + +static const struct imx258_link_freq_config link_freq_configs_24[] = { + [IMX258_LINK_FREQ_1267MBPS] = { + .pixels_per_line = IMX258_PPL_DEFAULT, + .reg_list = { + .num_of_regs = ARRAY_SIZE(mipi_1272mbps_24mhz), + .regs = mipi_1272mbps_24mhz, + } + }, + [IMX258_LINK_FREQ_640MBPS] = { + .pixels_per_line = IMX258_PPL_DEFAULT, + .reg_list = { + .num_of_regs = ARRAY_SIZE(mipi_642mbps_24mhz), + .regs = mipi_642mbps_24mhz, } }, }; @@ -410,6 +475,9 @@ struct imx258 { /* Current mode */ const struct imx258_mode *cur_mode; + const struct imx258_link_freq_config *link_freq_configs; + const s64 *link_freq_menu_items; + /* * Mutex for serialized access: * Protect sensor module set pad format and start/stop streaming safely. @@ -713,7 +781,7 @@ static int imx258_set_pad_format(struct v4l2_subdev *sd, imx258->cur_mode = mode; __v4l2_ctrl_s_ctrl(imx258->link_freq, mode->link_freq_index); - link_freq = link_freq_menu_items[mode->link_freq_index]; + link_freq = imx258->link_freq_menu_items[mode->link_freq_index]; pixel_rate = link_freq_to_pixel_rate(link_freq); __v4l2_ctrl_s_ctrl_int64(imx258->pixel_rate, pixel_rate); /* Update limits and set FPS to default */ @@ -727,7 +795,7 @@ static int imx258_set_pad_format(struct v4l2_subdev *sd, vblank_def); __v4l2_ctrl_s_ctrl(imx258->vblank, vblank_def); h_blank = - link_freq_configs[mode->link_freq_index].pixels_per_line + imx258->link_freq_configs[mode->link_freq_index].pixels_per_line - imx258->cur_mode->width; __v4l2_ctrl_modify_range(imx258->hblank, h_blank, h_blank, 1, h_blank); @@ -747,7 +815,7 @@ static int imx258_start_streaming(struct imx258 *imx258) /* Setup PLL */ link_freq_index = imx258->cur_mode->link_freq_index; - reg_list = &link_freq_configs[link_freq_index].reg_list; + reg_list = &imx258->link_freq_configs[link_freq_index].reg_list; ret = imx258_write_regs(imx258, reg_list->regs, reg_list->num_of_regs); if (ret) { dev_err(&client->dev, "%s failed to set plls\n", __func__); @@ -946,9 +1014,9 @@ static int imx258_init_controls(struct imx258 *imx258) imx258->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr, &imx258_ctrl_ops, V4L2_CID_LINK_FREQ, - ARRAY_SIZE(link_freq_menu_items) - 1, + ARRAY_SIZE(link_freq_menu_items_19_2) - 1, 0, - link_freq_menu_items); + imx258->link_freq_menu_items); if (imx258->link_freq) imx258->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; @@ -964,8 +1032,10 @@ static int imx258_init_controls(struct imx258 *imx258) if (vflip) vflip->flags |= V4L2_CTRL_FLAG_READ_ONLY; - pixel_rate_max = link_freq_to_pixel_rate(link_freq_menu_items[0]); - pixel_rate_min = link_freq_to_pixel_rate(link_freq_menu_items[1]); + pixel_rate_max = + link_freq_to_pixel_rate(imx258->link_freq_menu_items[0]); + pixel_rate_min = + link_freq_to_pixel_rate(imx258->link_freq_menu_items[1]); /* By default, PIXEL_RATE is read only */ imx258->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &imx258_ctrl_ops, V4L2_CID_PIXEL_RATE, @@ -1086,8 +1156,19 @@ static int imx258_probe(struct i2c_client *client) } else { val = clk_get_rate(imx258->clk); } - if (val != IMX258_INPUT_CLOCK_FREQ) { - dev_err(&client->dev, "input clock frequency not supported\n"); + + switch (val) { + case 19200000: + imx258->link_freq_configs = link_freq_configs_19_2; + imx258->link_freq_menu_items = link_freq_menu_items_19_2; + break; + case 24000000: + imx258->link_freq_configs = link_freq_configs_24; + imx258->link_freq_menu_items = link_freq_menu_items_24; + break; + default: + dev_err(&client->dev, "input clock frequency of %u not supported\n", + val); return -EINVAL; } -- 2.42.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-03-27 23:22 UTC|newest] Thread overview: 110+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-03-27 23:16 [PATCH 00/23] v2: imx258 improvement series git 2024-03-27 23:16 ` git 2024-03-27 23:16 ` [PATCH 01/23] media: i2c: imx258: Remove unused defines git 2024-03-27 23:16 ` git 2024-03-28 7:42 ` Krzysztof Kozlowski 2024-03-28 7:42 ` Krzysztof Kozlowski 2024-03-27 23:16 ` [PATCH 02/23] media: i2c: imx258: Make image geometry meet sensor requirements git 2024-03-27 23:16 ` git 2024-03-27 23:16 ` [PATCH 03/23] media: i2c: imx258: Disable digital cropping on binned modes git 2024-03-27 23:16 ` git 2024-03-27 23:16 ` [PATCH 04/23] media: i2c: imx258: Remove redundant I2C writes git 2024-03-27 23:16 ` git 2024-03-27 23:16 ` [PATCH 05/23] media: i2c: imx258: Add regulator control git 2024-03-27 23:16 ` git 2024-03-27 23:16 ` [PATCH 06/23] media: i2c: imx258: Make V4L2_CID_VBLANK configurable git 2024-03-27 23:16 ` git 2024-03-27 23:16 ` [PATCH 07/23] media: i2c: imx258: Split out common registers from the mode based ones git 2024-03-27 23:16 ` git 2024-03-27 23:16 ` git [this message] 2024-03-27 23:16 ` [PATCH 08/23] media: i2c: imx258: Add support for 24MHz clock git 2024-03-28 8:09 ` Sakari Ailus 2024-03-28 8:09 ` Sakari Ailus 2024-03-28 17:55 ` Luigi311 2024-03-28 17:55 ` Luigi311 2024-03-28 23:03 ` Luigi311 2024-03-28 23:03 ` Luigi311 2024-04-04 8:03 ` Sakari Ailus 2024-04-04 8:03 ` Sakari Ailus 2024-03-27 23:16 ` [PATCH 09/23] media: i2c: imx258: Add support for running on 2 CSI data lanes git 2024-03-27 23:16 ` git 2024-03-28 8:19 ` Sakari Ailus 2024-03-28 8:19 ` Sakari Ailus 2024-03-28 23:42 ` Luigi311 2024-03-28 23:42 ` Luigi311 2024-03-29 19:10 ` Luigi311 2024-03-29 19:10 ` Luigi311 2024-03-27 23:16 ` [PATCH 10/23] media: i2c: imx258: Follow normal V4L2 behaviours for clipping exposure git 2024-03-27 23:16 ` git 2024-03-27 23:16 ` [PATCH 11/23] media: i2c: imx258: Add get_selection for pixel array information git 2024-03-27 23:16 ` git 2024-03-27 23:16 ` [PATCH 12/23] media: i2c: imx258: Allow configuration of clock lane behaviour git 2024-03-27 23:16 ` git 2024-03-27 23:16 ` [PATCH 13/23] media: i2c: imx258: Correct max FRM_LENGTH_LINES value git 2024-03-27 23:16 ` git 2024-03-27 23:17 ` [PATCH 14/23] media: i2c: imx258: Issue reset before starting streaming git 2024-03-27 23:17 ` git 2024-03-27 23:17 ` [PATCH 15/23] media: i2c: imx258: Set pixel_rate range to the same as the value git 2024-03-27 23:17 ` git 2024-03-27 23:17 ` [PATCH 16/23] media: i2c: imx258: Support faster pixel rate on binned modes git 2024-03-27 23:17 ` git 2024-03-27 23:17 ` [PATCH 17/23] dt-bindings: media: imx258: Rename to include vendor prefix git 2024-03-27 23:17 ` git 2024-03-27 23:47 ` Conor Dooley 2024-03-27 23:47 ` Conor Dooley 2024-03-28 0:57 ` git 2024-03-28 0:57 ` git 2024-03-28 8:52 ` Kieran Bingham 2024-03-28 8:52 ` Kieran Bingham 2024-03-28 10:15 ` Conor Dooley 2024-03-28 10:15 ` Conor Dooley 2024-03-28 16:15 ` Luigi311 2024-03-28 16:15 ` Luigi311 2024-03-27 23:17 ` [PATCH 18/23] dt-bindings: media: imx258: Add alternate compatible strings git 2024-03-27 23:17 ` git 2024-03-28 0:44 ` Rob Herring 2024-03-28 0:44 ` Rob Herring 2024-03-28 7:47 ` Krzysztof Kozlowski 2024-03-28 7:47 ` Krzysztof Kozlowski 2024-03-28 17:05 ` Luigi311 2024-03-28 17:05 ` Luigi311 2024-03-28 17:06 ` Krzysztof Kozlowski 2024-03-28 17:06 ` Krzysztof Kozlowski 2024-03-28 18:55 ` Rob Herring 2024-03-28 18:55 ` Rob Herring 2024-03-28 19:16 ` Luigi311 2024-03-28 19:16 ` Luigi311 2024-03-28 20:46 ` Rob Herring 2024-03-28 20:46 ` Rob Herring 2024-03-28 21:02 ` Luigi311 2024-03-28 21:02 ` Luigi311 2024-03-28 20:05 ` kernel test robot 2024-03-28 20:05 ` kernel test robot 2024-03-30 0:30 ` kernel test robot 2024-03-30 0:30 ` kernel test robot 2024-03-30 20:59 ` kernel test robot 2024-03-30 20:59 ` kernel test robot 2024-03-27 23:17 ` [PATCH 19/23] media: i2c: imx258: Change register settings for variants of the sensor git 2024-03-27 23:17 ` git 2024-03-27 23:17 ` [PATCH 20/23] media: i2c: imx258: Make HFLIP and VFLIP controls writable git 2024-03-27 23:17 ` git 2024-03-27 23:17 ` [PATCH 21/23] drivers: media: i2c: imx258: Use macros git 2024-03-27 23:17 ` git 2024-03-27 23:17 ` [PATCH 22/23] drivers: media: i2c: imx258: Add support for powerdown gpio git 2024-03-27 23:17 ` git 2024-03-28 20:48 ` Rob Herring 2024-03-28 20:48 ` Rob Herring 2024-03-28 21:11 ` Luigi311 2024-03-28 21:11 ` Luigi311 2024-04-02 14:28 ` Dan Carpenter 2024-04-02 14:28 ` Dan Carpenter 2024-03-27 23:17 ` [PATCH 23/23] drivers: media: i2c: imx258: Add support for reset gpio git 2024-03-27 23:17 ` git 2024-03-28 7:43 ` [PATCH 00/23] v2: imx258 improvement series Krzysztof Kozlowski 2024-03-28 7:43 ` Krzysztof Kozlowski 2024-03-30 3:51 ` Dang Huynh 2024-03-30 3:51 ` Dang Huynh 2024-03-30 6:37 ` Luigi311 2024-03-30 6:37 ` Luigi311 -- strict thread matches above, loose matches on Subject: below -- 2024-03-27 22:20 git 2024-03-27 22:20 ` [PATCH 08/23] media: i2c: imx258: Add support for 24MHz clock git 2024-03-27 22:20 ` git
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240327231710.53188-9-git@luigi311.com \ --to=git@luigi311.com \ --cc=conor+dt@kernel.org \ --cc=dave.stevenson@raspberrypi.com \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=imx@lists.linux.dev \ --cc=jacopo.mondi@ideasonboard.com \ --cc=kernel@pengutronix.de \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=mchehab@kernel.org \ --cc=robh@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=sakari.ailus@linux.intel.com \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.